Panasonic Hard Disk Storage Unit Ajhrw10g Operating Instructions

31
Viewing slot numbers and HDD status
This indicates the P2 card or HDD containing the clip 
where the cursor is positioned.
This displays the P2 card slot number or HDD 
containing the clips, in yellow.
If the recording of a clip extends over a multiple 
number of P2 cards, all the numbers of the slots where 
the P2 cards with the recorded clip are inserted are 
displayed.
The numbers of the slots where the P2 cards are 
inserted are displayed in white.
One HDD mark indicates a RAID1 configuration, and...

32
Playing the clips
The PLAYER application starts up when the PLAY button is pressed after the clips to be played have been 
selected on the EXPLORE screen.
A
 
 (PREV button)
Each time this button is pressed, play jumps to the 
start of the previous clip.
B
   
 (REW button)
When this button is pressed, clips are played 
rapidly in reverse, skipping frames, at the playback 
speed specified on the SETTING screen (page 33).
C
 
 (PLAY button)
Press this button to play the clip.
D
 
 (PAUSE button)
Press...

33
Playing the clips (continued)
Setting the FF/REW rate
Set the speed in the REW and FF.
When SETTING button is pressed on the PLAYER 
application screen, the following screen appears.
A
BC D
A 4Xspeed  button
Clips are played rapidly while skipping frames at a 
speed equivalent to 4 times the normal speed.
B 8Xspeed  button
  Clips are played rapidly while skipping frames at a 
speed equivalent to 8 times the normal speed.
C   16Xspeed  button
Clips are played rapidly while skipping frames at a 
speed...

34
Sharing the folders
A shared setting can be established to allow the folders of an HDD selected on the EXPLORE screen to be 
accessed from another computer.
  Please set Network in SETTING screen in advance. 
(page 38) Accessing via network will not enable if you 
do not set so.
A
 SHARE button / UNSHARE button
Select the folder and press this button to share. 
Select the shared folder and press UNSHARE 
button to make it in unshared state.
B   
 SHARE ALL  button
Press this button to share all the...

35
Returning the clips in the RECYCLE folder
When the RECYCLE button is pressed on the main screen, the RECYCLE screen is displayed.
The clips in the RECYCLE folder and folders can now be displayed, deleted or restored.
A   SELECT ALL button / UNSELECT ALL button
Pressing the SELECT ALL button enables you 
to select all clips and folders in the RECYCLE 
folder at once. Afterwards, the button is labeled 
UNSELECT ALL. 
Pressing the UNSELECT ALL button clears the 
selected status of all clips and folders...

36
Formatting
To format a P2 card or HDD, press the FORMAT button on the main screen. The device selection screen to be 
formatted now appears.
A
   FORMAT SLOTS button
   
SLOT1 button/SLOT2 button/SLOT3 button/
SLOT4 button/SLOT5 button
These buttons can be used to select the P2 cards 
inserted in any slot.
B
 FORMAT HDDS button
   
HDD1 button/HDD2 button/RAID1 button
  These buttons can be used to select any of the 
HDDs.
C
   
 START  button
This starts the formatting.
D CLOSE  button
Return to the...

37
Checking the state of all slots
Press INFO button in the main screen, the INFO screen will display.
You can check the volume of P2 cards in any slot or 
the HDDs. The default volume name is DVCPRO HD. 
If you want to check the volume in other format, please 
press FORMAT select button on the bottom of the 
screen.
A
 Slots
Write-protected P2 cards are identified by a (
) 
mark next to the slot number.
B
 Format select button
This indicates the used memory and total memory 
(USED/ALL) in minutes (MIN)...

38
System setting
Press SETTING button to set the system in the main screen. 
This SETTING screen is constructed by plural TAB as the following.
For details, refer to the explanations for each individual tag
Configuring network settings (Network)
Set network access of LAN1 as well as LAN2.
F C
D
E
A
B
A   Adapter
Select rear panel LAN connector. (Page 7)
B   
 DHCP
This sets the IP address automatically.
The IP address is allocated automatically from the 
DHCP server if a DHCP server is available in the...

39
System setting (continued)
Specifying copy options (Copy Setting)
Set the option functions in copying.
A
B
C
D
E
A
 Verify
Compare source and destination data after copying 
is finished.
  ● ON button
     Compare data.
  ● OFF button
     Do not compare data.
B
   Card  Check
Check whether the same status applies to the data 
on the P2 card which has been inserted as that for 
the data copied onto the HDD.
If any changes have been made to a copied P2 
card such as when data has added or deleted, the...

40
System setting (continued)
Checking SMART Info
“SMART” is an abbreviation of “Self-Monitoring, 
Analysis and Reporting Technology”.
This function is incorporated within hard disk drives in 
order to quickly discover any problems the drive and 
estimate the extent of the damage.
A
BC
E D
A
 S.M.A.R.T.  Information
  ● Drive Model
     The model numbers of the HDD currently used 
are displayed in this column.
  ● Temperature (°C)
     The current temperatures of the HDD are 
displayed in this column....