Panasonic G6 Manual

							241
Playback/Editing
∫Canceling all the [Print Set] settings
Select the menu.
•
Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
∫ To print the date
After setting the number of prints, set/cancel  printing with the recording date by touching 
[Date].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date print feature is disabled for pictures that are stamped with text.
•The number of prints can be set from 0 to 999.•Depending on the printer, the date print settings of the printer may take precedence so check if 
this is the case.
•It may not be possible to use the print settings  with other equipment. In this case, cancel all the 
settings, and reset the settings.
•When you set pictures in a group to [Print Set],  the number of pictures added to [Print Set] and 
the total number of pictures to be printed are displayed on the [Print Set] icon of the group’s top 
picture.
Not available in these cases:
•
You cannot use [Print Set] for the following pictures.–Motion pictures
–Pictures taken with [ ]–File that does not comply with the DCF standard
[MENU] >[Playback] >[Print Set] >[Cancel]
DMC-G6PDF-VQT4Z78_eng.book  241 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							242
Playback/Editing
You can set protection for pictures you do not want to delete by mistake.
1Select the menu.
∫ Canceling all the [Protect] settings
Select the menu.
•
Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•The [Protect] feature is only designed to work with this camera.•Even if you protect pictures on a card, they will be deleted if the card is formatted.•When you set pictures in a group to [Protect], the number of pictures with the [Protect] setting is 
displayed on the [Protect] icon of the group’s top picture.
[Protect]
[MENU] >[Playback] >[Protect] >[Single]/[Multi]
2Select the picture.
[Single] setting
Drag the screen horizontally to select an image, and 
then touch [Set/Cancel].
•
Setting is canceled by touching [Set/Cancel] again.•Exit the menu after it is set.
[Multi] setting
Touch the picture you wish to protect.
•
Setting is canceled by touching the same picture again.
•Exit the menu after it is set.
[MENU] >[Playback] >[Protect] >[Cancel]
•
Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK].
6HW&DQFHO
123
456
6HW&DQFHO
DMC-G6PDF-VQT4Z78_eng.book  242 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							243
Playback/Editing
You can clear and replace all information relating to face recognition in selected images.
1Select the menu.
2Drag the screen horizontally to select an image, and then touch [Set].
3Touch the name of the person you wish to edit.
4(When [REPLACE] is selected) Touch the person to replace.
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Cleared information regarding the [Face Recog.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorized using Face Recognition in [Category Play].
•The Face Recognition information of pictures in a group has to be edited at once. (You cannot 
edit one picture at a time.)
This sets which option, [Yes] or [No], will be highlighted first 
when the confirmation screen for deleting a picture is 
displayed.
1Select the menu.
2Touch the item.
•
Exit the menu after it is set.
[Face Rec Edit]
[MENU]>[Playback] >[Face Rec Edit] >[REPLACE]/[DELETE]
[Delete Confirmation]
[MENU] >[Playback] >[Delete Confirmation]
ItemDescription of settings
[“Yes” first] [Yes] is highlighted first, so deletion can be done quickly.
[“No” first][No] is highlighted first. Accidental deletion of pictures is avoided.
NoYe s
DMC-G6PDF-VQT4Z78_eng.book  243 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							244
Wi-Fi/NFC
Wi-FiR function/NFC function
∫Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than 
wireless LAN devices, ensure that  the appropriate measures are taken for safety designs 
and defects for the systems used. Panasonic  will not take any responsibility for any 
damage that arises when using the camera fo r any purpose other than as a wireless LAN 
device.
∫ Use of the Wi-Fi function of this camera is presumed to be in countries where this 
camera is sold
There is the risk that the camera violates  the radiowave regulations if used in countries 
other than those where this camera is sold, and Panasonic takes no responsibility for any 
violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
∫ Do not use the camera in areas with magnetic fields, static electricity or 
interference
•
Do not use the camera in areas with magnetic fields, static electricity or interference, such as 
near microwave ovens. Radio waves may not reach the camera.
•Using the camera near devices such as microwave ovens or cordless telephones that use the 
2.4 GHz radio wave band may cause a decrease in performance in both devices.
∫ Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function, wireless networks will be searched 
automatically. When this happens, wireless netwo rks that you are not authorized to use 
(SSID
¢) may be displayed, however do not attempt to connect to the network as it may be 
considered as unauthorized access.
¢ SSID refers to the name that is used to identify a network over a wireless LAN connection. If 
the SSID matches for both devices, transmission is possible.
∫Before Use
•To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped 
with the wireless LAN function is required.
DMC-G6PDF-VQT4Z78_eng.book  244 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							245
Wi-Fi/NFC
∫This unit is compatible with NFC
Using the NFC “ Near Field Communication ” function, you 
can easily transfer data necessary for a Wi-Fi connection 
between this camera and the smartphone/tablet.
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
∫ What you can do with the [Wi-Fi] button when connected to Wi-Fi
If [Wi-Fi] button is pressed when connected  to Wi-Fi, the following operations can be 
performed.
•
During [Remote Shooting & View], pressing [Wi-Fi] button will terminate the Wi-Fi connection.
¢ This is not displayed when the destination of [Playback on TV] or  [Send Images Stored in the 
Camera]  is set to [Printer] .
Compatible models
This function can be used with the NFC compatible device with Android (OS version 
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones/tablets, refer 
to the operating instructions of your device. 
A Wi-Fi connection lamp
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi 
connection
[Wi-Fi]/[Fn4] button can be used in two ways, as [Wi-Fi] 
or as [Fn4] (function 4). At the time of purchase, it is 
initially set to [Wi-Fi].
•
Refer to P52  for details about the function button.
ItemDescription of settings
[Terminate the Connection]Terminates the Wi-Fi connection.
[Change the Destination]Terminates the Wi-Fi connection, and allows you to 
select a different Wi-Fi connection.
[Change Settings for Sending 
Images]¢Refer to P287 for details.
[Register the Current Destination 
to Favorite]Registering the current connection destination or the 
connection method, you can  easily connect with the 
same connection method next time.
[Network Address]Displays the MAC address and IP address of this unit.
0ç10Õ
DMC-G6PDF-VQT4Z78_eng.book  245 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							246
Wi-Fi/NFC
∫Describing method
When “select [Smartphone]”, etc. is described in a step, 
perform any of the following operations.
•
The camera cannot be used to connect to a public wireless LAN connection.•Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless 
access point.
•We strongly recommend that you set an encryption to maintain information security.•It is recommended to use a fully charged battery when sending images.•When the battery indicator is flashing red, the connection with other equipment may not start or 
the connection may be disrupted. (A message such as [Communication error] is displayed.)
•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
•Pictures may not be completely sent depending on radio wave conditions. If the connection is 
terminated while sending pictures, pictures with missing sections may be sent.
•Do not remove the memory card or battery or move to an area without any reception 
while sending images.
•The monitor display may become distorted for an instant while connected to the service, 
however this will not affect the image being sent.
In this owner’s manual, steps for setting a menu item are described as follows.
[Wi-Fi] >[New Connection] >[Remote Shooting & View]
Touch operation: Touch [Smartphone].
Button operation: Select [Smartphone] with the cursor  button, and then press [MENU/SET].
DMC-G6PDF-VQT4Z78_eng.book  246 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							247
Wi-Fi/NFC
What you can do with the Wi-Fi function
What you can do
Controlling with a Smartphone/Tablet
Recording with a smartphone.
Saving images stored in the 
camera.
Sending images to an SNS.P248
Easy connection, easy transfer
A connection can be easily established 
by pressing and holding [Wi-Fi] or by 
using the NFC function. You can also 
transfer images easily.
Displaying pictures on a TVP259
When sending images to PrinterP260
When sending images to AV device
You can send pictures and motion pict ures to AV devices in your 
house (home AV devices). You can  also send them to the devices 
(external AV devices) of your family  or friends living away from you 
via “LUMIX CLUB”. P261
When sending images to PCP264
Using Web services
You can send pictures and motion pictures to an SNS, etc. via 
“LUMIX CLUB”. By setting up automatic transfers of pictures and 
motion pictures to the [Cloud Sync. Service], you can receive the 
transferred pictures or motion pictures on a PC or smartphone.
P268
0ç10Õ0ç10Õ
DMC-G6PDF-VQT4Z78_eng.book  247 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							248
Wi-Fi/NFC
Controlling with a Smartphone/Tablet
You can remotely operate the camera using a 
smartphone/tablet.
You need to install “Panasonic Image App” (referred to 
as “ Image App ” from this point on )  on your 
smartphone/tablet.
The “Image App” is an application provided by Panasonic.
•
Use the latest version.•The service may not be able to be used properly depending on the type of smartphone/tablet 
being used. For information on the Image App, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English only.)•When downloading the app on a mobile network, high packet communication fees may be 
incurred depending on the details of your contract.
¢ Connecting to this unit with [Wi-Fi Direct] requires  Android OS 4.0 or higher and Wi-Fi 
Direct
TM support.
Installing the smartphone/tablet app “ Panasonic Image App ”
For AndroidTM appsFor iOS apps
OS Android 2.2 ~ Android 4.2¢iOS 4.3~ iOS 6.1
Installation 
procedure
1Connect your Android device 
to a network.
2Select “Google PlayTM Store”.3Enter “ Panasonic Image App ” 
into the search box.
4Select “ Panasonic Image 
App ” and install it.
•
The icon will be added to the 
menu.
1Connect the iOS device to the 
network.
2Select “App StoreSM”.3Enter “ Panasonic Image App ” 
into the search box.
4Select “ Panasonic Image 
App ” and install it.
•
The icon will be added to the 
menu.
DMC-G6PDF-VQT4Z78_eng.book  248 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							249
Wi-Fi/NFC
A connection can be easily established by pressing and holding [Wi-Fi] or by using the 
NFC function.
1Press and hold [Wi-Fi].
•The information (SSID and password) required for directly 
connecting your smartphone/tablet to this unit is displayed.
•Except for when connecting for the first time, the screen 
from the previous connection is displayed.
•To change the connection method, press [DISP.], and then 
select the connection method.
•The same screen can be displayed by selecting the 
following menu items.
2Operate the smartphone/tablet.
Connecting to a smartphone/tablet
Preparations:
•
Install the “ Image App ” in advance. (P248)
[Wi-Fi]>[New Connection] >[Remote Shooting 
& View]
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit, and 
then enter the password.
3 Start “ Image App ”.  (P248)
•
When the connection is complete, live images being captured by the camera are 
displayed on the smartphone/tablet.
0ç10Õ
DMC-G6PDF-VQT4Z78_eng.book  249 ページ  ２０１３年４月２５日　木曜日　午前１０時５分 
						

							250
Wi-Fi/NFC
∫Changing the connection method
To change the connection met hod, press [DISP.], and then 
select the connection method.
On the camera
Select [Via Network] or [Direct], and connect.  (P280)
On your smartphone/tablet
When connecting with [Via Network]:
1Turn on the Wi-Fi function.2Select the wireless access point you want to connect to, and set.3Start “ Image App ”. (P248)
When connecting with [Wi-Fi Direct] or  [WPS Connection] in [Direct]:
Start “ Image App ”.  (P248)
DMC-G6PDF-VQT4Z78_eng.book  250 ページ  ２０１３年４月２５日　木曜日　午前１０時５分