Panasonic Full HD LCD Display TH 70LF50 Operating Instructions

ON
POWER ON12 : 00VIDEO
SET UP TIMER 
DAY
POWER MODE
TIME
INPUT
TIMER FUNCTION PROGRAM1
MON PRESENT  TIME OF DAY  MON  0 : 03
31
SET UP TIMER
PRESENT TIME SETUP / SET UP TIMER
Set the program for turning the power ON/OFF and select the input signal at the speci ed time. Up to 20 programs can be set. 
[Setting Example]
Program 1, Every Monday,  12:00, Power On, Input: VIDEO
1
Set the program number.
2To execute the program, set to “ON”. 
The program is disabled when “OFF” is set.
 
3
Set the day.
The...

SCREENSAVER 
START 
MODEOFF
PRESENT  TIME OF DAY    MON 0 : 02
1/2
SIGNAL
INPUT LABEL
ECO MODE SETTINGS
WOBBLING
SET UP
OFF
COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
NO ACTIVITY POWER OFF
DISABLE
OSD LANGUAGEENGLISH (
US)
32
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each. 
Black
Dark Gray
Gray
Light Gray...

SCREENSAVER 
START 
MODE
FINISH TIME START TIMETIME OF DAY
6 : 15
12 : 30 PRESENT  TIME OF DAY    MON 15 : 00
SCREENSAVER 
START 
MODE
SAVER DURATION SHOW DURATIONINTERVAL
12 : 00
3 : 00 PRESENT  TIME OF DAY    MON 15 : 00
SCREENSAVER 
START 
MODE
SCREENSAVER DURATIONSTANDBY AFTER SCR SAVER6 : 15 PRESENT  TIME OF DAY    MON 15 : 00
2 1
3
1/2
SIGNAL
INPUT LABEL
ECO MODE SETTINGS
WOBBLING
SET UP
OFF
COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
NO ACTIVITY POWER OFF
DISABLE
OSD LANGUAGEENGLISH (
US)
33...

1/2
SIGNAL
INPUT LABEL
ECO MODE SETTINGS
WOBBLING
SET UP
OFF
COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
NO ACTIVITY POWER OFF
DISABLE
OSD LANGUAGEENGLISH (
US)
34
NO ACTIVITY POWER OFF
Press to select the menu to adjust.
Press to select “ENABLE” or “DISABLE”.
Press to exit from SET UP.
When this function is set to “ENABLE”, the power is turned off (standby) automatically when there is no operation of the 
Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed....

1/2
SIGNAL
INPUT LABEL
ECO MODE SETTINGS
WOBBLING
SET UP
OFF
COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
NO ACTIVITY POWER OFF
DISABLE
OSD LANGUAGEENGLISH (
US)
 
ECO MODE
CUSTOM: The menu of power consumption reduction is individually set.
ON:  The following  xed values are set to the menu of power consumption reduction. Individual setting is not available.
NO SIGNAL POWER OFF: ENABLE
PC POWER MANAGEMENT: ON
DVI-D POWER MANAGEMENT: ON
POWER SAVE: SENSOR
Using Remote Control
When  is pressed, the “ECO MODE”...

1/2
SIGNAL
INPUT LABEL
ECO MODE SETTINGS
WOBBLING
SET UP
OFF
COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
NO ACTIVITY POWER OFF
DISABLE
OSD LANGUAGEENGLISH (
US)
Press to display the SETUP menu.
Press to select INPUT LABEL.
Press to display the INPUT LABEL screen.
Press to select image input.
Press to change input label.1
2
3
VIDEO
Component
INPUT LABEL
PCDVI
SLOT INPUT
HDMIVIDEO SLOT INPUT
Component
PC
DVI
HDMI
This function can change the label of the Input signal to be displayed. (see page 19)
Image input...

37
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
Press to display the SET UP menu.
Press to select “MENU DISPLAY DURATION”.
Press to adjust the display duration.
Press to select “MENU TRANSPARENCY”.
Press to adjust the transparency.
Press to exit from adjust mode.
   Selectable languages
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
......(Chinese)
.......(Japanese)
.......(Russian)
Selecting the On-Screen Menu Language
1
1
4...

2/2SET UP
MULTI DISPLAY SETUP
SET UP TIMER
PRESENT TIME SETUPNETWORK SETUPMENU DISPLAY DURATION15 SMENU TRANSPARENCY20
38
By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all 
screens.
For this mode of operation, each display has to be set up with a Display number to determine its location.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” menu.
How to setup MULTI DISPLAY
group of 16 (4 × 4) group of 4 (2...

39
SET UP for MULTI DISPLAY
Item Details
LOCATIONSelect the required arrangement number. (A1-E5 : Refer to the following)
Display Number locations for each arrangement.
(Examples)
( 2 × 1) ( 2 × 3 ) ( 4 × 4 )( 4 × 2 ) ( 5 × 5 )
A1 A2 A3 A4 A5
B1 B2 B3 B4 B5
C1 C2 C3 C4 C5
D1 D2 D3 D4 D5
E1 E2 E3 E4 E5
Press to exit from adjust mode.4
You can set the remote control ID when you want to use this remote control on one of several different displays.
Note:
To operate this function, please purchase ID remote...

1/2
SIGNAL
INPUT LABEL
ECO MODE SETTINGS
WOBBLING
SET UP
OFF
COMPONENT/RGB-IN SELECT
RGB SCREENSAVER
NO ACTIVITY POWER OFF
DISABLE
OSD LANGUAGEENGLISH (
US)
40
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT/RGB IN terminal.
Y,  P
B, PR signals  “COMPONENT”
RGB signals 
 “RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN SELECT”.
Press to select the desired mode.
COMPONENT 
 RGB
Press to exit from...