Panasonic Full HD LCD Display TH 70LF50 Operating Instructions

          
TH- 70LF50U
TH- 80LF50U
Model No.
Operating Instructions
FULL HD LCD Display
EnglishBefore connecting, operating or adjusting this product,
please read these instructions completely.
Please keep this manual for future reference. 

2
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to quali ed service personnel.
The lightning flash with 
arrow-head within a triangle 
is in tend ed to tell the user 
that parts inside the product 
are a risk of electric shock 
to per sons.The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the ap pli ance.
CAUTION
RISK OF...

3
Important Safety Instructions
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 
ampli ers) that produce heat.
  9) Do not defeat the safety purpose...

4
Table of Contents Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment 
from your new LCD Display.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments, 
and retain them for future reference.
Retain your purchase receipt as well, and record the model number and serial number of your set in the 
space provided on the rear cover of these instructions.
Visit our Panasonic Web Site...

5
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will...

6
Safety Precautions
This LCD Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury. 
(All of the following accessories are manufactured by Panasonic Corporation.)
   
CAUTION
 
 When using the LCD Display
Do not bring your hands, face or objects close to the 
ventilation holes of the Display.
• 
Top of the Display is usually very hot due to the high temperature 
of exhaust...

7
Safety Precautions
WARNING 
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning 
cloth or a soft, lint-free cloth.
• 
If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral 
detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.
•  Do not scratch or hit the surface of the panel with  ngernails or...

8
+
-+
-
Accessories
Requires two AA batteries.
2.  Insert batteries - note correct 
polarity (+ and -).
   Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not...

9
Ceiling Suspension
You can install the Display by attaching commercially available eyebolts (M10) to it and suspending it from the ceiling, etc.
Eyebolt mounting positions 
(for horizontal installation)
Eyebolt mounting positions 
(for vertical installation)Notes:
•  Suspension and installation should be performed by an 
installation professional.
•  Do not install it using only one eyebolt.
•  When the Display is installed horizontally, make sure to 
place the power Indicator side down and, face up...

1 2
10
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on 
both the left and right sides.
AC cord  xing
Unplug the AC cord
Unplug the AC cord pressing the 
two knobs.
Note:
When disconnecting the AC cord, be 
absolutely sure to disconnect the AC 
cord plug at the socket outlet  rst.
AC cord connection and  xing, cable  xing
Connections
AC cord 
(accessory)
Using the clamper
Secure any excess cables with clamper as required.
Note:...