Panasonic Full HD LCD Display TH 70LF50 Operating Instructions

21
Basic Controls
Standby (ON / OFF) button
The Display must  rst be plugged into 
the wall outlet and turned on at the power 
switch (see page 17).
Press this button to turn the Display On, 
from Standby mode. Press it again to turn 
the Display Off to Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect. 
(see page 22)
POS. /SIZE button 
(see page 25, 26)
PICTURE button 
(see page 27, 28)
Sound mute On / Off 
Press this button to mute the sound.
Press again to...

22
ASPECT Controls
The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format 
picture.
Press repeatedly to move through the aspect options:
[from the unit]
Right side surface
Note:
The aspect mode is memorized separately for each input terminal. Note: 
Be aware that if you put the display in a public place for commercial purposes or a public showing and 
then use the aspect mode select function to shrink or expand the picture, you may be violating...

2 
EXIT
2
1
EXIT
× 1× 2× 3× 4
23
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
•  When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•  The Digital Zoom function cannot be selected while in the following operation state:
  When MULTI DISPLAY SETUP is ON...

24
On-Screen Menu Displays
Remote Control Unit
1Display the menu screen.
Press to select.
(Example: PICTURE menu)
MENU
VOL
+/
-/
 
Press several times.
Each time the MENU button is pressed, the 
menu screen will switch.
Normal Viewing PICTURE
SOUND POS. /SIZE
SET UP
2Select the item.
 
100
70
50
50
50
PICTURE 
NORMAL NORMALIZE STANDARD 
BRIGHTNESS PICTURE MENU 
COLOR PICTURE BACKLIGHT
TINT
ADVANCED SETTINGSCOLOR TEMPNORMAL SHARPNESS
50
( Example: 
PICTURE menu)
Select.
VOL
ENTER/
+/
-/
 Press.
 Select....

OFF0
NORMALNORMALIZE
AUTO SETUP
POS. /SIZE
V-POS
0
H-POS
V-SIZECLOCK PHASEH-SIZE
1:1 PIXEL MODE DOT CLOCK
0
0
0 0
Note:
Unadjustable items are grayed out.
Adjustable items differ 
depending on the input signal 
and the display mode.
25
Adjusting POS. /SIZE
1Press to display the POS. /SIZE menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
Note:
If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This...

26
While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION 
(
  ) button is pressed during “NORMALIZE”, then all adjustment values (except “CLOCK PHASE” and “DOT CLOCK”) 
are returned to the factory settings.
Helpful Hint (    / NORMALIZE 
 Normalization)
H-POSAdjust the horizontal position.V-POSAdjust the vertical position.
H-SIZEAdjust the horizontal size.V-SIZEAdjust the vertical size.
CLOCK 
PHASE(During RGB and PC input signal)...

100
70
50
50
50
PICTURE
NORMALNORMALIZESTANDARD
BRIGHTNESS PICTURE MENU
COLOR PICTURE BACKLIGHT
TINT
ADVANCED SETTINGSCOLOR TEMPNORMAL SHARPNESS
50
27
Press the left   or right    button to switch between modes.
STANDARD
For viewing in standard (evening lighting) environments.
DYNAMIC
For viewing in brighter environments.
CINEMA
For use in viewing tone-focused pictures with brightness 
reduced.
Note:
  If you would like to change the picture and color of the 
selected PICTURE menu to something else,...

28
PICTURE Adjustments
ADVANCED SETTINGS
Notes:
•  “COLOR” setting can be adjusted for 
Video input signal.
•
 You can change the level of each function 
(BACKLIGHT, PICTURE, BRIGHTNESS, 
COLOR, TINT, SHARPNESS) for each 
PICTURE MENU.
•  The setting details for STANDARD, 
DYNAMIC and CINEMA respectively 
are memorized separately for each input 
terminal.
•  The “TINT” setting can be adjusted for 
NTSC signal only during Video input 
signal.
•  “BACKLIGHT” can be adjusted when 
“ECO MODE” is set to...

0
0
0
SOUND
NORMALNORMALIZESTANDARD1/2
OFF TREBLE AUDIO MENU
BALANCEBASS
SURROUND
29
SOUND Adjustment
Note: BASS, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.
1Press to display the SOUND menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Press to exit from adjust mode.
2Select to adjust each item.
While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION 
(
  ) button is...

99 : 99MON
PRESENT  TIME SETUP
PRESENT  TIME OF DAY    MON  99 : 99
SET
PRESENT  TIME OF DAY DAY
2/2SET UP
MULTI DISPLAY SETUP
SET UP TIMER
PRESENT TIME SETUPNETWORK SETUPMENU DISPLAY DURATION15 SMENU TRANSPARENCY20
30
PRESENT TIME SETUP / SET UP TIMER
PRESENT TIME SETUP
The timer can switch the Display ON or OFF.
Before attempting Timer Set, con rm the PRESENT TIME OF DAY and adjust if 
necessary. Then set POWER ON TIME / POWER OFF TIME.
Press to display the SET UP menu.
Press to select SET UP TIMER or...