Panasonic FULL HD LCD Display TH-43LFE8U Operating Instructions

61English
Button lock
Limits operation of the buttons on the unit.
[Off]:All the buttons on main unit can 
be used.
[MENU&ENTER]:Locks  and 
 buttons.
[On]:All button operations except for the 
power switch are disabled.
  
vTo set [Button lock]
Set with the buttons on the unit.
[Off]:
   Press  for 4 times.
   Press  for 4 times.
   Press  for 4 times.
   Press .
[MENU&ENTER]:
   Press  for 4 times.
   Press  for 4 times.
   Press  for 4 times.
   Press .
[On]:
   Press  for 4 times.
   Press  for 4...

English62
Serial ID function
Set to control external control with the PC connected to 
SERIAL terminal according to  the Display’s ID number 
(Panel ID).
[Off]:Disables external control by the ID.
[On]:Enables the external control by the ID.
LAN control protocol
Select the LAN control protocol.
[Protocol 1]:Control with the Panasonic Display 
sequence.
[Protocol 2]:Control with the sequence that 
compatible with Panasonic Projector.
Note

”For PJLink and WEB browser control, the operation is 
possible...

63English
Power on screen delay
You can set the power-on delay time of the displays to 
reduce the power load, when you press  to turn on the multiple displays that are 
set together.
Set each display’s setting individually.
[Off]:The display will be turned on at the same 
time as  is 
pressed.
[AUTO]:Sets the delay time automatically according 
to the number set for [Display ID].
The delay time is determined by multiplying 
[Display ID] x 0.3.seconds.
HJ:KHQ>LVSOD\,@LV
:VHFRQGV
[1 to...

English64
Using Network 
Function
This unit has a network function and you can control the 
Display connected to the network using your computer.
Necessary environment for 
computers to be connected
First of all, confirm your computer whether it has a wired 
LAN or a built-in wireless LAN.
Before connecting the Display to the computer, be sure 
to check the following settings.
Check 1: About LAN cable

”Is the cable connected properly?

”To connect a device using 100BASE-TX, use LAN 
cable that is...

65English
Command control
Network function of the unit can control the unit in the 
same way as serial control from a network.
Supported commands
Commands used in the serial control are supported. 
(see page 20)
Note

”If you would like more detail, please contact the 
dealer.
PJLink protocol
The unit’s Network function is compatible with PJLink 
Class 1. The following operations can be performed from 
a computer when PJLink protocol is used.

”Setting the Display

”Querying the Display status...

English66
Command Control
INFO? Other information query
Returns version number.
CLSS? Class information query
Returns “1”.
PJLink security authentication
When using PJLink with security authorization, either 
of the password set for administrator privileges and 
the password set for user privileges with Web browser 
control can be used as the password for PJLink. (see 
page 67)
When using PJLink without security authorization, set 
use without the password for administrator privileges 
and the password...

67English
Using Web Browser 
Control
You can use a Web browser to control the unit and set 
up a network and password.
Before Using Web Browser Control
To use the Web browser control, the unit and computer 
set ups are required.
  
vAbout Web BrowserSet each item in [Network settings] and be sure to set 
[Network control] to [On]. (see page 55)
  
vComputer SetupDisable the proxy server settings and enable 
JavaScript.

”The setting procedure differs depending on the 
software version.
Please refer to...

English68
Operating with Web Browser
  
vDescription of each item
Page tab
Click these to switch pages.
[Status]
Click this item, and the status of the Display is 
displayed.
[Display control]
Click this item to display the Display control page.
[Detailed set up]
Click this item to display the advanced settings page.
[Change password]
Crestron Connected™
Click this item to display the Crestron Connected™ 
operation page.
Display status page
Click [Status], then [Display status] to display the Status...

69English
Change Password page
Click [Change password].
Administrator
User
  
vAdministrator mode
Account
Current user name input field
Current password input field
New user name input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
  
vUser account
Account
New user name input field
New password input field
New password input field (re-enter for confirmation)
Button for executing password change
  
vUser mode
A user can change...

English70
3Complete the detailed settings and 
click [Next].
Setting contents here are the same as the address 
information contents set for the [LAN setup] menu 
of the Display.
After all required items have been entered, click 
[Next]. Then, a confirmation window appears.
4Click [Submit].
The settings will be registered.
Note

”Changing the setting of LAN while connected with 
LAN might disconnect the connection.
Adjust clock page
Click [Detailed set up], then [Adjust clock] to display the 
Adjust...