Panasonic FULL HD LCD Display TH-43LFE8U Operating Instructions
Here you can view all the pages of manual Panasonic FULL HD LCD Display TH-43LFE8U Operating Instructions. The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
71English
Ping test page
This page makes it possible to check whether the
network is connected to the DNS server, etc.
Click [Detailed set up], then [Ping test] to display the
Ping test page.
Enter the IP address of the server to be tested.
Button for conducting the test.
Display which appears when the connection was
successful.
Display which appears when the connection failed.
Command port set up page
Set the port number to be used with command control.
Click [Detailed set up], then [Command port set...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-70.png "Page 71
71English
Ping test page
This page makes it possible to check whether the
network is connected to the DNS server, etc.
Click [Detailed set up], then [Ping test] to display the
Ping test page.
Enter the IP address of the server to be tested.
Button for conducting the test.
Display which appears when the connection was
successful.
Display which appears when the connection failed.
Command port set up page
Set the port number to be used with command control.
Click [Detailed set up], then [Command port set...")
71English Ping test page This page makes it possible to check whether the network is connected to the DNS server, etc. Click [Detailed set up], then [Ping test] to display the Ping test page. Enter the IP address of the server to be tested. Button for conducting the test. Display which appears when the connection was successful. Display which appears when the connection failed. Command port set up page Set the port number to be used with command control. Click [Detailed set up], then [Command port set...
Page 72
![Page 72
English72
”[Tools] page
Click [Tools] on the operation page.
Panasonic LCD Display
[Control System]
Sets the information required for the communication
with the controller that is connected to the Display.
[User Password]
Sets the password for the user rights in the operation
page of Crestron Connected™.
[Admin Password]
Sets the password for the administrator rights in the
operation page of Crestron Connected™.
[Network Status]
Displays the setting of LAN.
[DHCP]
[IpAddress]
[SubnetMask]...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-71.png "Page 72
English72
”[Tools] page
Click [Tools] on the operation page.
Panasonic LCD Display
[Control System]
Sets the information required for the communication
with the controller that is connected to the Display.
[User Password]
Sets the password for the user rights in the operation
page of Crestron Connected™.
[Admin Password]
Sets the password for the administrator rights in the
operation page of Crestron Connected™.
[Network Status]
Displays the setting of LAN.
[DHCP]
[IpAddress]
[SubnetMask]...")
English72 ”[Tools] page Click [Tools] on the operation page. Panasonic LCD Display [Control System] Sets the information required for the communication with the controller that is connected to the Display. [User Password] Sets the password for the user rights in the operation page of Crestron Connected™. [Admin Password] Sets the password for the administrator rights in the operation page of Crestron Connected™. [Network Status] Displays the setting of LAN. [DHCP] [IpAddress] [SubnetMask]...
Page 73
![Page 73
73English
ID Remote Control
Function
You can set the remote control ID when you want to use
this remote control on one of several different displays.
In that case, you need to set the remote control’s ID
number to match the Display’s ID number you have set
in [Display ID] following the steps below.
Note
”To operate this function,
please purchase ID
remote controller sold
separately.
Object model :
N2QAYA000093
Setting the remote control’s ID
number
1Set [Controller ID function] to [On].
(see...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-72.png "Page 73
73English
ID Remote Control
Function
You can set the remote control ID when you want to use
this remote control on one of several different displays.
In that case, you need to set the remote control’s ID
number to match the Display’s ID number you have set
in [Display ID] following the steps below.
Note
”To operate this function,
please purchase ID
remote controller sold
separately.
Object model :
N2QAYA000093
Setting the remote control’s ID
number
1Set [Controller ID function] to [On].
(see...")
73English ID Remote Control Function You can set the remote control ID when you want to use this remote control on one of several different displays. In that case, you need to set the remote control’s ID number to match the Display’s ID number you have set in [Display ID] following the steps below. Note ”To operate this function, please purchase ID remote controller sold separately. Object model : N2QAYA000093 Setting the remote control’s ID number 1Set [Controller ID function] to [On]. (see...
Page 74
![Page 74
English74
Entering characters
Some settings require to enter characters.
To enter text, select characters in the on-screen
keyboard.
Example: Entering profile names ([Memory save])
MEMORY1p
0 123456789
a
a/A/@ bcde f gh i j
klmnopq r s t
uvwxyz
–
_ .
0L$BODFM MMEFMFUF Delete
The default profile name is [MEMORY1], here, we are
changing it to [MY PICTURE] as an example.
1Select [All delete] with , and
press .
MEMORY1p
All text is deleted.
To delete individual characters, select [Delete].
2Select...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-73.png "Page 74
English74
Entering characters
Some settings require to enter characters.
To enter text, select characters in the on-screen
keyboard.
Example: Entering profile names ([Memory save])
MEMORY1p
0 123456789
a
a/A/@ bcde f gh i j
klmnopq r s t
uvwxyz
–
_ .
0L$BODFM MMEFMFUF Delete
The default profile name is [MEMORY1], here, we are
changing it to [MY PICTURE] as an example.
1Select [All delete] with , and
press .
MEMORY1p
All text is deleted.
To delete individual characters, select [Delete].
2Select...")
English74 Entering characters Some settings require to enter characters. To enter text, select characters in the on-screen keyboard. Example: Entering profile names ([Memory save]) MEMORY1p 0 123456789 a a/A/@ bcde f gh i j klmnopq r s t uvwxyz – _ . 0L$BODFM MMEFMFUF Delete The default profile name is [MEMORY1], here, we are changing it to [MY PICTURE] as an example. 1Select [All delete] with , and press . MEMORY1p All text is deleted. To delete individual characters, select [Delete]. 2Select...
Page 75
75English Preset Signals This unit can display the video signals shown in the table below. vVideo signal Corresponding signalResolution (Dot)Scanning frequencyDot clock frequency (MHz)Format *3Horizontal (kHz)Vertical (Hz) NTSC/NTSC4.43/ PA L - M / PA L 6 0720 × 480i 15.7 59.9 - V PAL/PAL-N/SECAM 720 × 576i 15.6 50.0 - V 525i(480i) 720 × 480i 15.7 59.9 13.5 R/Y 625i(576i) 720 × 576i 15.6 50.0 13.5 R/Y 525i(480i) 720(1440) × 480i* 215.7 59.9 27.0 D/H 625i(576i) 720(1440) × 576i*215.6 50.0 27.0 D/H...
Page 76
76English 1 280 × 800 1 280 × 80041.3 50.0 68.0 R/Y/D/H 49.3 59.9 71.0 R/Y/D/H 49.7 59.8 83.5 R/Y/D/H MSXGA 1 280 × 96060.0 60.0 108.0 R/Y/D/H 85.9 85.0 148.5 R/Y SXGA 1 280 × 1 02464.0 60.0 108.0 R/Y/D/H 80.0 75.0 135.0 R/Y/D/H 91.1 85.0 157.5 R/Y/D/H 1 360 × 768 1 360 × 76847.7 60.0 85.5 D/H 47.7 60.0 84.7 D/H 47.7 59.8 84.8 D/H 1 366 × 768 1 366 × 76839.6 50.0 69.9 D/H 48.4 60.0 86.7 R/Y/D/H 48.0 60.0 72.0 R/Y/D/H 39.6 49.9 69.0 R/Y/D/H 47.7 59.8 85.5 R/Y/D/H SXGA+ 1 400 × 1 05065.2 60.0 122.6...
Page 77
![Page 77
77English
vUnit
1Press for several
times and display the [Setup] menu.
2Select [OSD language] with , and
then press and hold
for more than 5 seconds.
3Select [YES] with or and press .
The message [Shipping (wait a moment)] will be
displayed.
4After the message [Please turn off
the power] is displayed, turn the
power off pressing .
”For TH-43LFE8U, TH-48LFE8U, TH-
55LFE8U and TH-65LFE8U
If the Main Power On / Off switch is
locked, please disconnect the AC cord
plug from the wall...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-76.png "Page 77
77English
vUnit
1Press for several
times and display the [Setup] menu.
2Select [OSD language] with , and
then press and hold
for more than 5 seconds.
3Select [YES] with or and press .
The message [Shipping (wait a moment)] will be
displayed.
4After the message [Please turn off
the power] is displayed, turn the
power off pressing .
”For TH-43LFE8U, TH-48LFE8U, TH-
55LFE8U and TH-65LFE8U
If the Main Power On / Off switch is
locked, please disconnect the AC cord
plug from the wall...")
77English vUnit 1Press for several times and display the [Setup] menu. 2Select [OSD language] with , and then press and hold for more than 5 seconds. 3Select [YES] with or and press . The message [Shipping (wait a moment)] will be displayed. 4After the message [Please turn off the power] is displayed, turn the power off pressing . ”For TH-43LFE8U, TH-48LFE8U, TH- 55LFE8U and TH-65LFE8U If the Main Power On / Off switch is locked, please disconnect the AC cord plug from the wall...
Page 78
![Page 78
English78
Data Cloning
Menu settings and adjusted values set on a single
display can be copied to multiple displays using a USB
memory.
vData that can be copied
Settings and set values of [Picture], [Sound], [Setup],
[Position] and [Options] menus
”The following data cannot be copied. Setting is
required for each display.
Date and time
Setting for [Network settings] - [LAN setup]
Display ID in [Options] - [Display ID]
vSupported device
” Commercially available USB memory devices are...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-77.png "Page 78
English78
Data Cloning
Menu settings and adjusted values set on a single
display can be copied to multiple displays using a USB
memory.
vData that can be copied
Settings and set values of [Picture], [Sound], [Setup],
[Position] and [Options] menus
”The following data cannot be copied. Setting is
required for each display.
Date and time
Setting for [Network settings] - [LAN setup]
Display ID in [Options] - [Display ID]
vSupported device
” Commercially available USB memory devices are...")
English78 Data Cloning Menu settings and adjusted values set on a single display can be copied to multiple displays using a USB memory. vData that can be copied Settings and set values of [Picture], [Sound], [Setup], [Position] and [Options] menus ”The following data cannot be copied. Setting is required for each display. Date and time Setting for [Network settings] - [LAN setup] Display ID in [Options] - [Display ID] vSupported device ” Commercially available USB memory devices are...
Page 79
![Page 79
79English
6Select [YES] with and press
.
Data copy to the USB memory starts.
The data will be overwritten when any data exists originally.
Are you OK to write the data?Data to USB Memory
YESNO
The following message is displayed after data copy
has finished.
Data copy finished.
7After data copy has finished, remove
the USB memory device from the USB
terminal.
Copying the USB memory data to the
display
1Insert the USB memory device, which
the data has been copied, to the USB
terminal of the...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-78.png "Page 79
79English
6Select [YES] with and press
.
Data copy to the USB memory starts.
The data will be overwritten when any data exists originally.
Are you OK to write the data?Data to USB Memory
YESNO
The following message is displayed after data copy
has finished.
Data copy finished.
7After data copy has finished, remove
the USB memory device from the USB
terminal.
Copying the USB memory data to the
display
1Insert the USB memory device, which
the data has been copied, to the USB
terminal of the...")
79English 6Select [YES] with and press . Data copy to the USB memory starts. The data will be overwritten when any data exists originally. Are you OK to write the data?Data to USB Memory YESNO The following message is displayed after data copy has finished. Data copy finished. 7After data copy has finished, remove the USB memory device from the USB terminal. Copying the USB memory data to the display 1Insert the USB memory device, which the data has been copied, to the USB terminal of the...
Page 80
80English Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Check Picture Sound Electrical Appliances Cars / Motorcycles Fluorescent light InterferenceNoisy Sound Normal PictureNo SoundVolume (Check whether the mute function has been activated on the remote control.) No PictureNo SoundNot plugged into AC outlet Not switched on Picture and Brightness/Volume setting (Check by pressing the power switch or stand-by button on the...