Panasonic FULL HD LCD Display TH-43LFE8U Operating Instructions
Here you can view all the pages of manual Panasonic FULL HD LCD Display TH-43LFE8U Operating Instructions. The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51English
Input label
This function can change the label of the Input signal to
be displayed.
HDMI1
HDMI2
DVI-D
PC
VIDEOPC DVI-D HDMI2
HDMI1
VIDEO Input label
[HDMI1][HDMI1] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[HDMI2][HDMI2] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[DVI-D][DVI-D] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] /...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-50.png "Page 51
51English
Input label
This function can change the label of the Input signal to
be displayed.
HDMI1
HDMI2
DVI-D
PC
VIDEOPC DVI-D HDMI2
HDMI1
VIDEO Input label
[HDMI1][HDMI1] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[HDMI2][HDMI2] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] / (Skip)
[DVI-D][DVI-D] / [DVD1] / [DVD2] /
[DVD3] / [Blu-ray1] / [Blu-ray2]
/ [Blu-ray3] / [CATV] / [VCR] /
[STB] /...")
51English Input label This function can change the label of the Input signal to be displayed. HDMI1 HDMI2 DVI-D PC VIDEOPC DVI-D HDMI2 HDMI1 VIDEO Input label [HDMI1][HDMI1] / [DVD1] / [DVD2] / [DVD3] / [Blu-ray1] / [Blu-ray2] / [Blu-ray3] / [CATV] / [VCR] / [STB] / (Skip) [HDMI2][HDMI2] / [DVD1] / [DVD2] / [DVD3] / [Blu-ray1] / [Blu-ray2] / [Blu-ray3] / [CATV] / [VCR] / [STB] / (Skip) [DVI-D][DVI-D] / [DVD1] / [DVD2] / [DVD3] / [Blu-ray1] / [Blu-ray2] / [Blu-ray3] / [CATV] / [VCR] / [STB] /...
Page 52
![Page 52
English52
[DVI-D power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 or so seconds at DVI-D input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected:
Power is turned on; the power indicator lights up
green.
[PC power management] (DPMS function)
When this function is set to [On], it operates...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-51.png "Page 52
English52
[DVI-D power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 or so seconds at DVI-D input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected:
Power is turned on; the power indicator lights up
green.
[PC power management] (DPMS function)
When this function is set to [On], it operates...")
English52 [DVI-D power management] When this function is set to [On], it operates under the following conditions to turn the power on or off automatically. When no pictures (sync signal) are detected for 60 or so seconds at DVI-D input: Power is turned off (standby); the power indicator lights up orange. When pictures (sync signal) are subsequently detected: Power is turned on; the power indicator lights up green. [PC power management] (DPMS function) When this function is set to [On], it operates...
Page 53
![Page 53
53English
Multi Display Settings
1 to 5 displays can be aligned in horizontal direction and
vertical direction respectively, and those displays are
regarded as one group. The enlarged image is shown on
the combined display.
Multi Display Settings
Multi Display Settings
Multi display settingHorizontal scale
Bezel H adjustment Vertical scale
Bezel V adjustment
LocationOff
2
2
A1
Note
”When the multi display is set to [Off], adjust to
the same angle of view for [Position] (see page
38). Then,...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-52.png "Page 53
53English
Multi Display Settings
1 to 5 displays can be aligned in horizontal direction and
vertical direction respectively, and those displays are
regarded as one group. The enlarged image is shown on
the combined display.
Multi Display Settings
Multi Display Settings
Multi display settingHorizontal scale
Bezel H adjustment Vertical scale
Bezel V adjustment
LocationOff
2
2
A1
Note
”When the multi display is set to [Off], adjust to
the same angle of view for [Position] (see page
38). Then,...")
53English Multi Display Settings 1 to 5 displays can be aligned in horizontal direction and vertical direction respectively, and those displays are regarded as one group. The enlarged image is shown on the combined display. Multi Display Settings Multi Display Settings Multi display settingHorizontal scale Bezel H adjustment Vertical scale Bezel V adjustment LocationOff 2 2 A1 Note ”When the multi display is set to [Off], adjust to the same angle of view for [Position] (see page 38). Then,...
Page 54
![Page 54
English54
Set up timer
Sets the program to turn the power on/off or switch video
inputs at the specified time. Up to 20 programmes can
be set.
Note
”Set [Date and time] before setting Timer. (see page
54)
”When multiple programs are set at the same time,
the program with the smallest program number is
enabled.
[Setting Example]
Program 1 Every Monday 12:00
Power On Input: HDMI1
12:00 Set up timer
ProgramTimer function1On
Power On
HDMI1 Day
Time Power mode
InputMONDAY1
2
3
4
5...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-53.png "Page 54
English54
Set up timer
Sets the program to turn the power on/off or switch video
inputs at the specified time. Up to 20 programmes can
be set.
Note
”Set [Date and time] before setting Timer. (see page
54)
”When multiple programs are set at the same time,
the program with the smallest program number is
enabled.
[Setting Example]
Program 1 Every Monday 12:00
Power On Input: HDMI1
12:00 Set up timer
ProgramTimer function1On
Power On
HDMI1 Day
Time Power mode
InputMONDAY1
2
3
4
5...")
English54 Set up timer Sets the program to turn the power on/off or switch video inputs at the specified time. Up to 20 programmes can be set. Note ”Set [Date and time] before setting Timer. (see page 54) ”When multiple programs are set at the same time, the program with the smallest program number is enabled. [Setting Example] Program 1 Every Monday 12:00 Power On Input: HDMI1 12:00 Set up timer ProgramTimer function1On Power On HDMI1 Day Time Power mode InputMONDAY1 2 3 4 5...
Page 55
![Page 55
55English
Network settings
Set when networking with a computer.
[Network settings] submenu will be displayed.
v[Network control]
Set when controlling with the unit’s LAN terminal.
[On]:
Controls via LAN using the LAN terminal of the
Display. The power indicator lights orange when
the power is turned off with the remote control
(standby).
[Off]:
Invalidates control with LAN terminal.
(In this case, the power consumption of Standby
condition (when the power is turned off with the
remote control)...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-54.png "Page 55
55English
Network settings
Set when networking with a computer.
[Network settings] submenu will be displayed.
v[Network control]
Set when controlling with the unit’s LAN terminal.
[On]:
Controls via LAN using the LAN terminal of the
Display. The power indicator lights orange when
the power is turned off with the remote control
(standby).
[Off]:
Invalidates control with LAN terminal.
(In this case, the power consumption of Standby
condition (when the power is turned off with the
remote control)...")
55English Network settings Set when networking with a computer. [Network settings] submenu will be displayed. v[Network control] Set when controlling with the unit’s LAN terminal. [On]: Controls via LAN using the LAN terminal of the Display. The power indicator lights orange when the power is turned off with the remote control (standby). [Off]: Invalidates control with LAN terminal. (In this case, the power consumption of Standby condition (when the power is turned off with the remote control)...
Page 56
![Page 56
English56
Note
”When the PJLink protocol is used, the port setting is
not necessary.
v[Network status]
Checks the current Network settings status.
192. 168. 0. 1 255. 255. 255. 0192. 168. 0. 8
12:34:56:78:9A:BC Network status
DHCP
IP address
Subnet mask
Gateway
MAC addressOff
v[AMX D.D.]
Set whether to allow the Display to be detected by
AMX Device Discovery.
[On]:
Enables detection by AMX Device Discovery.
[Off]:
Disables detection by AMX Device Discovery.
”For more details, visit...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-55.png "Page 56
English56
Note
”When the PJLink protocol is used, the port setting is
not necessary.
v[Network status]
Checks the current Network settings status.
192. 168. 0. 1 255. 255. 255. 0192. 168. 0. 8
12:34:56:78:9A:BC Network status
DHCP
IP address
Subnet mask
Gateway
MAC addressOff
v[AMX D.D.]
Set whether to allow the Display to be detected by
AMX Device Discovery.
[On]:
Enables detection by AMX Device Discovery.
[Off]:
Disables detection by AMX Device Discovery.
”For more details, visit...")
English56 Note ”When the PJLink protocol is used, the port setting is not necessary. v[Network status] Checks the current Network settings status. 192. 168. 0. 1 255. 255. 255. 0192. 168. 0. 8 12:34:56:78:9A:BC Network status DHCP IP address Subnet mask Gateway MAC addressOff v[AMX D.D.] Set whether to allow the Display to be detected by AMX Device Discovery. [On]: Enables detection by AMX Device Discovery. [Off]: Disables detection by AMX Device Discovery. ”For more details, visit...
Page 57
![Page 57
57English
Function button settings
Assigns specific functions to the numeric buttons (
to ). The buttons can be used as shortcut keys by
assigning frequently used operations.
1Switch [Function group] with .
0O USBPC DVI-D HDMI2 HDMI1
VIDEO Function button settings
Function groupFunction button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button guideInputInput
;
Memory load
;
Shortcut
2Select the numeric button with
and set the function to...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-56.png "Page 57
57English
Function button settings
Assigns specific functions to the numeric buttons (
to ). The buttons can be used as shortcut keys by
assigning frequently used operations.
1Switch [Function group] with .
0O USBPC DVI-D HDMI2 HDMI1
VIDEO Function button settings
Function groupFunction button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button guideInputInput
;
Memory load
;
Shortcut
2Select the numeric button with
and set the function to...")
57English Function button settings Assigns specific functions to the numeric buttons ( to ). The buttons can be used as shortcut keys by assigning frequently used operations. 1Switch [Function group] with . 0O USBPC DVI-D HDMI2 HDMI1 VIDEO Function button settings Function groupFunction button 1 Function button 2 Function button 3 Function button 4 Function button 5 Function button 6 Function button guideInputInput ; Memory load ; Shortcut 2Select the numeric button with and set the function to...
Page 58
![Page 58
English58
Display orientation
Sets the on-screen display orientation in the portrait
setting.
[Landscape]:
On-screen display angle is for horizontal installation.
[Portrait]:
The on-screen display rotates anticlockwise by 90
degrees for easy view in the portrait setting.
Power Indicator
Note
”In the portrait setting, the power indicator shall come
to the downside.
OSD position
Sets the display position of the on-screen menu.
Each time
or is pressed, the display position of the
on-screen menu...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-57.png "Page 58
English58
Display orientation
Sets the on-screen display orientation in the portrait
setting.
[Landscape]:
On-screen display angle is for horizontal installation.
[Portrait]:
The on-screen display rotates anticlockwise by 90
degrees for easy view in the portrait setting.
Power Indicator
Note
”In the portrait setting, the power indicator shall come
to the downside.
OSD position
Sets the display position of the on-screen menu.
Each time
or is pressed, the display position of the
on-screen menu...")
English58 Display orientation Sets the on-screen display orientation in the portrait setting. [Landscape]: On-screen display angle is for horizontal installation. [Portrait]: The on-screen display rotates anticlockwise by 90 degrees for easy view in the portrait setting. Power Indicator Note ”In the portrait setting, the power indicator shall come to the downside. OSD position Sets the display position of the on-screen menu. Each time or is pressed, the display position of the on-screen menu...
Page 59
![Page 59
59English
Options Adjustments
This unit offers special functions conveniently used
according to the installation location and application.
1Press .
[Setup] menu screen will be displayed.
2Select [OSD language] with
and press for more than 3
seconds.
Following screen will be displayed.
OptionsDisplay serial number
USB data cloning Software licenses
Shipping
3Select [Options] with and press
.
[Options] menu screen will be displayed.
1/3
0 0 Options
Input searchOnscreen display
Initial VOL level...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-58.png "Page 59
59English
Options Adjustments
This unit offers special functions conveniently used
according to the installation location and application.
1Press .
[Setup] menu screen will be displayed.
2Select [OSD language] with
and press for more than 3
seconds.
Following screen will be displayed.
OptionsDisplay serial number
USB data cloning Software licenses
Shipping
3Select [Options] with and press
.
[Options] menu screen will be displayed.
1/3
0 0 Options
Input searchOnscreen display
Initial VOL level...")
59English Options Adjustments This unit offers special functions conveniently used according to the installation location and application. 1Press . [Setup] menu screen will be displayed. 2Select [OSD language] with and press for more than 3 seconds. Following screen will be displayed. OptionsDisplay serial number USB data cloning Software licenses Shipping 3Select [Options] with and press . [Options] menu screen will be displayed. 1/3 0 0 Options Input searchOnscreen display Initial VOL level...
Page 60
![Page 60
English60
Onscreen display
Set to display / hide the following Onscreen display.
”Power on display
”Input signal switch display
”No signal display
”MUTE display after displaying the menu screen
”MUTE and off timer remaining time display after
is pressed
”Off timer remaining time display when 3 minutes
remaining
[On]:Displays the Onscreen display.
[Off]:Hides the Onscreen display.
Initial input
Adjusts the input signal when the unit is turned on.
[Off] / [HDMI1] / [HDMI2] / [DVI-D] / [PC] /...](http://img.usermanuals.tech/thumb/58/75916/w300_lfe8-series-om_d-59.png "Page 60
English60
Onscreen display
Set to display / hide the following Onscreen display.
”Power on display
”Input signal switch display
”No signal display
”MUTE display after displaying the menu screen
”MUTE and off timer remaining time display after
is pressed
”Off timer remaining time display when 3 minutes
remaining
[On]:Displays the Onscreen display.
[Off]:Hides the Onscreen display.
Initial input
Adjusts the input signal when the unit is turned on.
[Off] / [HDMI1] / [HDMI2] / [DVI-D] / [PC] /...")
English60 Onscreen display Set to display / hide the following Onscreen display. ”Power on display ”Input signal switch display ”No signal display ”MUTE display after displaying the menu screen ”MUTE and off timer remaining time display after is pressed ”Off timer remaining time display when 3 minutes remaining [On]:Displays the Onscreen display. [Off]:Hides the Onscreen display. Initial input Adjusts the input signal when the unit is turned on. [Off] / [HDMI1] / [HDMI2] / [DVI-D] / [PC] /...