Panasonic FULL HD LCD Display TH-43LFE8U Operating Instructions

11English
Accessories
Accessories Supply

Operating Instructions  
(Book)
Operating Instructions  
(CD-ROM)
Remote Control Transmitterî

”14$

English12
Remote Control Batteries
 3XOODQGKROGWKHKRRNWKHQRSHQWKHEDWWHU\FRYHU
 
$$$580W\SH
 5HSODFHWKHFRYHU
Helpful Hint

”)RUIUHTXHQWUHPRWHFRQWUROXVHUVUHSODFHROG
EDWWHULHVZLWK$ONDOLQHEDWWHULHVIRUORQJHUOLIH
Precaution on battery use
,QFRUUHFWLQVWDOODWLRQFDQFDXVHEDWWHU\OHDNDJH
DQGFRUURVLRQWKDWZLOOGDPDJHWKHUHPRWHFRQWURO
WUDQVPLWWHU
LVSRVDORIEDWWHULHVVKRXOGEHLQDQHQYLURQPHQW
IULHQGO\PDQQHU
Observe the following precaution:
...

13English
Connections
AC cord connection and fixing
43/48/55-inch models
Back of the unit
Insert the AC cord securely all the way seated on 
the back side of the unit.
65-inch model

”The AC cord for the 65-inch model has a 3-pin plug 
with earth.
Back of the unit
AC cord fixing
AC cord (supplied)
Plug the connector into the display unit.
Plug the AC cord until it clicks.
Note

”Make sure that the AC cord is locked on both the 
left and right sides.
Unplug the AC cord
Unplug the connector pressing the...

English14
Cable fixing
Note

”3 clampers are supplied with this unit. Fix the cables 
at 3 locations using the holes of clampers as shown 
below.
If you need more clampers, purchase them from your 
dealer. (Available from the customer service)
Keep pushing both 
side snaps hole 1.  Attach the clamper
Insert the clamper in a 
hole.To remove from the 
unit:
snaps
Keep pushing the 
knob hooks 2.  Bundle the cables
Set the tip in the hooksTo loosen:
knob 

15English
Video equipment connection
 
1 AV IN (VIDEO): Composite Video Input Terminal
Connect to video equipment such as 
VCR or DVD player, etc.
(see page 19)
2 PC IN: PC Input Terminal
Connect to video terminal of PC, 
video equipment with “Y, P
B(CB), 
PR(CR)” or “R, G, B” output.
(see page 18)
3AV IN
(HDMI 1,
 HDMI 2):HDMI Input Terminal
Connect to video equipment such as 
VCR or DVD player, etc.
(see page 16)
4 DVI-D IN: DVI-D Input Terminal
Connect to video equipment with 
DVI-D output.
(see page...

English16
HDMI 1 and 2 terminals connection
Note

”Additional equipment and HDMI cable shown are not 
supplied with this set.

”Some HDMI equipment may not be able to display 
picture.
 HDMI cable (not supplied)
 Video Cassette Recorder
 DVD PlayerPin assignments and signal names for HDMI 
Terminal
Pin No. Signal name
T.M.D.S Data2+
T.M.D.S Data2 Shield
T.M.D.S Data2-
T.M.D.S Data1+
T.M.D.S Data1 Shield
T.M.D.S Data1-
T.M.D.S Data0+
T.M.D.S Data0 Shield
T.M.D.S Data0-
T.M.D.S Clock+
T.M.D.S Clock...

17English
DVI-D IN terminal connection
Note

”Additional equipment and cables shown are not 
supplied with this set.

”Use the DVI-D cable complying with the DVI 
standard. Image deterioration may occur depending 
on the length or the quality of the cable.
Shared with PC IN.
  DVI-D video cable (Within 5 m) (not supplied)
 Stereo mini plug (M3) cable (not supplied)
 PC with DVI-D video outPin assignments and signal names for DVI-D 
Input Connector
Pin No. Signal Name
T.M.D.S. data 2-
T.M.D.S. data 2+...

English18
PC IN terminal connection
Connect a cable 
which matches 
the audio output 
terminal on the 
computer.
(not supplied) (Male) (Female)
Shared with DVI-D IN.
 Mini D-sub 15p (not supplied)
  Conversion adapter (if necessary) (not supplied)
  Stereo mini plug (M3) cable (not supplied)
 COMPUTER
The type of computer signal that can be connected

”With regard to the typical PC input signals that 
are described in “Preset Signals” (see page 75), 
adjustment values such as for the standard picture...

19English
VIDEO terminal connection
Note

”Video equipment, connection cables and conversion 
plugs are not supplied with this unit.
Yellow
White
Red
   
4-pole mini plug conversion cable (commercially 
available)
   
Audio video pin cable   
Video Cassette Recorder  DVD Player
Wiring specifications for 4-pole mini plug
Note

”Use a 4-pole mini plug (M3) with the following 
wiring specifications for the VIDEO terminal 
of this unit. If the wiring of a plug is different, 
audio and video are not...

English20
Pin assignments and signal names for SERIAL 
Terminal
6789
13452
Pin No. Signal Name
NC (not connected)
RXD
TXD
Non use
GND (Ground)
Non use
RTSShorted in this setCTS
NC (not connected)
These signal names are those of computer 
specifications.
Communication parameters
Signal level: RS-232C compliant
Synchronization method: Asynchronous
Baud rate: 9600 bps
Parity: None
Character length: 8 bits
Stop bit: 1 bit
Flow control: None
Basic format for control data
The transmission of control data from...