Panasonic Electronic Board Ub-8325 Operating Instructions

Using the View Window or Whiteboard Window
71
Using
-Make the current page empty after copy 
page is added:
With check mark (default setting):
The selected page of the IPB document is 
copied and the selecting page is 
automatically erased as a new page (blank 
page) by pressing the   (Copy Key). 
When selecting this option, be sure to wipe 
to clear the Interactive Panaboard screen 
after pressing the   (Copy Key).
Without check mark
:
The selected page of the IPB document is 
copied by pressing the...

Using the Panasonic-DMS
72
You can scan images on the screen to your computer 
by operating Panasonic-DMS.
1Click [Start], move the pointer to Programs–
Panasonic–Panasonic Document 
Management System–Document Manager.
(For Windows XP, All Programs instead of 
Programs.)
•The Panasonic-DMS software runs.
2Click the File menu, then click Select 
Source....
3Select Panaboard UB-8 USB TWAIN Driver 
and click [Select].
4Click the File menu, then click Acquire 
Image..., or click the   (scanner) icon on the...

Using the Panasonic-DMS
73
Using
It is possible to perform the same operations as with the electronic board control panel (page 16) from the following 
Panaboard Operation buttons.
Note
•While the Panaboard Operation Panel is displayed, the   (Copy Key) and   (2-Screen Copy Key) on 
the electronic board control panel are used for scanning images into the computer.
Panaboard Operation Panel
PanelNameDescription
Contrast/
Remaining Film 
Indicator
This lamp indicator notifies the user when the time to...

Using the Panasonic-DMS
74
To print documents from the computer to the printer, select the Print menu of the application software and select the 
printer name set when installing.
The standard printer name is “Panaboard-UB8 USB Printer (A4/Letter
 *)”.
* A4 or Letter changes with the models.
Note
•The Multi-Copy/Error Indicator flashes when printing.
After printing, all the panel keys are disabled until the Multi-Copy/Error Indicator lights.
•You cannot stop printing after printing starts. Do not attempt...

Daily Care and Maintenance
75
Help
Always turn off the power switch and unplug the 
power plug when cleaning outside and inside the 
unit.
Gently wipe the screen film and unit with a water-
dampened cloth that has been thoroughly wrung.
Note
•Use a commercially available white board 
cleaner for hard-to-erase stains. 
(SANFORD® EXPO® white board cleaner 
etc.)
If you accidentally write on the screen with an 
oil-based marker, wipe with a small amount of 
ethyl alcohol.
•Do not use thinner, benzine or...

Daily Care and Maintenance
76
2
Dampen the tip of a cotton-tipped swab in ethyl 
alcohol and gently wipe the printer head.
Note
•Never touch the printer head or the 
surrounding area with your hands as this may 
disable copying.
3
Remove the thermal transfer film with both 
hands and carefully wipe any dirt or stains off 
the platen roller and pick-up roller.
•For details on removing the thermal transfer 
film, see page 22.
•Dampen a soft cloth with neutral kitchen 
cleaner diluted in water, wring the...

Daily Care and Maintenance
77
Help
As the lifetime of the batteries in the Electronic Pen or 
the Electronic Eraser comes near to the end, the 
message “Low Battery” appears on the computer 
screen to which the electronic board is connected 
using interactive functions. When this message 
appears, get new batteries ready and replace the old 
ones as soon as possible.
When replacing batteries, remove the old batteries and 
replace according to step 1 under “Setting the 
Electronic Pen” on page 25 in the...

Troubleshooting
78
Treat problems according to the information given in the table below. If problems still persist, call your dealer for 
service.
Troubleshooting
SymptomCare and RemedySee
Page
Power switch is on but the 
indicator is off.Check that the power plug is securely plugged in.
(If the indicator still does not light, turn the power off and on again.)–
Copied copy paper will not come 
out.The unit is out of copy paper or thermal transfer film. (The Error 
Indicator flashes “ ” or “ ”.)
Insert...

Troubleshooting
79
Help
The software installed before is 
deleted from the Programs menu 
or cannot be used after installing 
the Panasonic-DMS.After the existing Panasonic-DMS software is uninstalled, the new 
Panasonic-DMS is installed.
Install the new Panasonic-DMS again as follows.
1. Uninstall the current Panasonic-DMS.
2. Install the old Panasonic-DMS.
3. Install the new Panasonic-DMS in the same folder with the 
old one.30-31
Panasonic Document 
Management System menu is 
remained in the Programs...

Troubleshooting
80
The following table describes the meaning of each of the symbols which may flash in the Multi-Copy/Error Indicator.
If other indications appear, call your dealer.
Detection of the marker color of 
the Electronic Pen does not work 
well when the Whiteboard mode 
of the interactive function is used.The marker for interactive (small) is not securely set.
Rotate the pen holder lever to the release position, and then 
return the pen holder lever to the lock position while inserting 
the...