Panasonic Electronic Board Ub-7325 Operating Instructions

Computer Interfacing
21
Operating Instructions
■Scanning
You can scan images on the screen to your 
computer by operating Panasonic-DMS.
1Click [Start], move the pointer to 
[Programs]–[Panasonic]–[Panasonic 
Document Management System]–
[Document Manager].
(For Windows XP, [All Programs] instead of 
[Programs].)
• The Panasonic-DMS software runs.
2Click the [File] menu, then click [Select 
Source...].
3Select [Panaboard UB5-7 USB TWAIN 
Driver] and click [Select].
4Click the [File] menu, then click...

Computer Interfacing
22
■Panaboard Operation Panel
It is possible to perform the same operations as with the electronic board control panel (page 9) from the following 
Panaboard Operation buttons.
Note
• While the Panaboard Operation Panel is displayed, the Copy Key on the electronic board control panel is 
used for scanning images into the computer.
PanelNameDescription
Contrast/
Remaining Film 
Indicator
This lamp indicator notifies the user when the time to replace the 
thermal transfer film is...

Computer Interfacing
23
Operating Instructions
■Printing
To print documents from the computer to the printer, select the Print menu of the application software and select 
the printer name set when installing.
The standard printer name is “Panaboard-UB7 USB Printer (Letter)”.
Note
• The Multi-Copy/Error Indicator flashes when printing.
After printing, all the panel keys are disabled until the Multi-Copy/Error Indicator lights.
• You cannot stop printing after printing starts. Do not attempt to stop...

24
Daily Care and Maintenance
Always turn off the power switch and unplug the 
power plug when cleaning outside and inside the 
unit.
■Cleaning the screen and the unit
Gently wipe the screen film and unit with a water-
dampened cloth that has been thoroughly wrung.
Note
• Use a commercially available white board 
cleaner for hard-to-erase stains. 
(SANFORD® EXPO® white board cleaner 
etc.)
If you accidentally write on the screen with an 
oil-based marker, wipe with a small amount of 
ethyl alcohol.
• Do...

Daily Care and Maintenance
25
Operating Instructions
2
Dampen the tip of a cotton swab in ethyl 
alcohol and gently wipe the printer head.
Note
• Never touch the printer head or the 
surrounding area with your hands as this may 
disable copying.
3
Remove the thermal transfer film with both 
hands and carefully wipe any dirt or stains off 
the platen roller and pick-up roller.
• For details on removing the thermal transfer 
film, see page 14.
• Dampen a soft cloth with neutral kitchen 
cleaner diluted in...

Troubleshooting
26
Treat problems according to the information given in the table below. If problems still persist, call your dealer for 
service.
Troubleshooting
SymptomCare and RemedySee
Page
Power switch is on but the 
indicator is off.Check that the power plug is securely plugged in.
(If the indicator still does not light, turn the power off and on again.)–
Copied copy paper will not come 
out.The unit is out of copy paper or thermal transfer film. (The Error 
Indicator flashes “ ” or “ ”.)
Insert...

Troubleshooting
27
Operating Instructions
■Meanings of error codes
The following table describes the meaning of each of the symbols which may flash in the Multi-Copy/Error 
Indicator.
If other indications such as “ ” appear, call your dealer.
Panasonic Document 
Management System menu is 
remained in the Programs menu 
even if Panasonic-DMS is 
uninstalled.The old Panasonic-DMS is not uninstalled if the old version of the 
Panasonic-DMS has been installed before installing the new one.
Uninstall the old...

Specifications
28
■Option and Separately available
Specifications
Model No.UB-7325
GeneralPower supply AC 100 - 120 V, 50/60 Hz
Power consumption
(Operational)1.4 A
External dimensions 
(Height × Width × Depth, 
without stand)1396 mm × 1648 mm × 264 mm (4' 7" × 5' 4
 7/8" × 10 3/8" )
Mass (without stand) 42.5 kg (94 lbs.)
Ambient operating conditions Temperature: 10–35°C (50–95
°F)
Humidity: 30–80% RH
Ambient storage conditions Temperature: -20–60°C (-4–140
°F)
Humidity: 15–80% RH...

29
Before installing this set, please read this manual completely.
CLASS 1 LED PRODUCT
WARNING
DO NOT INSTALL THIS OPTION EXCEPT 
BY A QUALIFIED SERVICE PERSONNEL.
CAUTION
SAFETY CHECK MUST BE DONE BY 
QUALIFIED SERVICE PERSONNEL AFTER 
INSTALLING THIS OPTION.
Installation Manual
Installation Manual
(for qualified service personnel)
Table of Contents
page
Assembling the Electronic Board . . . . . . . . . . . . . . . . . . . . . . . 30
●Accessories for assembling  . . . . . . . . . . . . . . . . . . . . ....

30
Assembling the Electronic Board
■Accessories for assembling
The package includes the parts for setting up the electronic board shown below. Make sure that all of these parts 
are included in the package before proceeding.
No.Part NameIllustrationQ’tyRemarks
Powe r  co rd1
Wall-mounting 
template1 For wall-mounting