Panasonic Electronic Board Ub-7325 Operating Instructions

Electronic Board
Operating Instructions
With Installation Manual
(for qualified service personnel)
Model No. UB-7325
Stand and wall-mounting kit are optional.
[Stand (option)][Wall-mounting (option)]
Operating Instructions
Installation Manual
• Before operating this unit, please read these instructions completely.
After reading them, preserve them carefully for future reference.
• Because of the nature of the print film, all the printed text will remain on the film.
• This product is designed for...

2
Thank you for purchasing the Panasonic Electronic Board.
For optimum performance and safety, please read these instructions carefully.
Q’ty
• Thermal transfer film   .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
• Markers (red, black, and blue)    .  .  .  .  .  .  1 each
• Operating Instructions    .  .  .  .  .  .  .  .  .  .  .  .  . 1
• Eraser  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
• Power cord   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1Q’ty
• Letter size...

3
Operating Instructions
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• CD-ROM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Part Names and Functions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• Control panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

4
For Your Safety
For Your Safety
CAUTION:
TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF 
THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR 
ANY TYPE OF MOISTURE.
THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY 
ACCESSIBLE.
The product should be used only with the power cord that is supplied by the manufacturer.
CLASS 1 LED PRODUCT 

Precautions
5
Operating Instructions
Precautions
Never remove the cover, take apart or modify the 
product. This will void the warranty.Do not position the electronic board in a location where 
it is unstable.
Do not put drinks, other liquids or heavy items on the 
tray or screen.After installing or moving the electronic board, lock the 
casters and set the fall-prevention extension legs.
Do not use the electronic board in an excessively 
humid or dusty location.If the electronic board is not going to be...

Precautions
6
■CD-ROM
To prevent the CD-ROMs from accidental damages: Do not lean against the screen or on the cover (lower), 
even if the electronic board is mounted on the wall.
Do not touch or write on the surface 
of the disc.Do not leave the disc out of the 
protective case.Do not leave the disc in direct 
sunlight or near heat sources.
Do not place heavy objects on the 
disc case or drop the case.To clean the disc, hold the disc by 
its edges and wipe it from the 
center to the edges with a dry,...

Precautions
7
Operating Instructions
Installation• Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or 
near air-conditioning vents as this may cause stretching and/or discoloration of the screen. 
• Do not install the unit in strong sunlight or strong lighting. Proper copying may become 
impossible.
• Do not install the unit in locations where the temperature may change suddenly as this may 
disable the unit’s ability to make copies.
Screen Film• Make thick and...

Part Names and Functions
8
Part Names and Functions
ON
OFF
Screen
One screen (with no 
ruled lines) of four 
screens can also be 
used for a projector 
(see page 14).
AC Inlet Power Switch Tr a y
Power Cord Output Port
This port holds up to 10 
sheets of output paper.
Paper Cover
Open this cover to 
load copy paper.
Printer Door
Open this door to load a 
thermal transfer film or to 
remove jammed paper.
(See pages 10, 15.)
Printer Open Lever
Push down this lever to 
open the printer door.
Control Panel...

Part Names and Functions
9
Operating Instructions
■Control panel
Panel NameDescription
Contrast/
Remaining 
Film 
Indicator
This lamp indicator notifies the user when the time to replace the thermal transfer 
film is approaching (estimated) and of the printing contrast used during copying.
Indicator off:  Normal printing contrast
Indicator on:  Darker than normal printing contrast
Indicator flashing*: Almost time to replace the thermal transfer film
(Note that only about 15 more sheets may be 
copied...

Installing the Thermal Transfer Film
10
Install the thermal transfer film in the printer.
1
Set the power switch to on ( I ).
• “ ” will flash on the Multi-Copy/Error 
Indicator when the thermal transfer film has 
run out.
• The screen will move to home position and 
stop.
2
Push down the printer open lever and open 
the printer door.
3
Install the thermal transfer film.
1) Set the thermal transfer film, with the blue 
gear in front, on the right.2) Insert the blue shaft into the front left hole.
3)...