Panasonic Electronic Board Ub-7325 Operating Instructions

Loading Copy Paper
11
Operating Instructions
4
Tighten the film, then close the printer door.
1) Rotate the blue gear in the direction of the 
arrow to take up the slack on the film.
• If a slack remains, perform step 3-2) through 
4-1) again.
2) Securely close the printer door by using both 
hands until a click is heard.
• “ ” flashing on the Multi-Copy/Error 
Indicator will go out.
Note
• If “ ” is still flashing after closing the printer 
door, make sure that the thermal transfer film 
has been...

Loading Copy Paper
12
2
Pull the paper cover forward as shown in the 
figure.
3
To prevent paper jams such as those caused 
by multiple sheets feeding at once, fan the 
paper thoroughly, square it, align it with the 
guide inside, and insert as far as it will go.
Note
• Only use Letter size copying paper having a 
weight of 60 g/m2 (16 lb.) to 90 g/m2 (24 lb.) 
as the copy paper for this unit.
• Do not stack more copy paper in the unit 
than the maximum paper limit indicated by 
the guide (see the above...

Making Copies
13
Operating Instructions
This section describes how to copy text and 
illustrations drawn on the screen.
1
Set the power switch to on ( I ).
• “ ” will light on the Multi-Copy/Error 
Indicator to indicate that the unit is ready to 
copy.
• The screen will move to home position and 
stop.
2
Press the Copy Key  .
• Text and illustrations on the screen will be 
copied and copies emerge from the output 
port.
• The output port can hold up to 10 sheets of 
copy paper. (Note that exceeding the...

14
One of four screens of this electronic board can also 
be used as the projector screen. The screen has no 
ruled lines so the projected image is easy to see.
1
Press   or   more than 2 seconds to 
move the screen to the projector screen.
• “0” is displayed on the Multi-Copy/Error 
Indicator while the screen advances to the 
projector screen.
or
Press   or   to move the screen to the 
screen with no ruled lines.
2
Project an image on the screen.
• Light from the projector may enter the eye 
when using...

Paper Jams
15
Operating Instructions
Remove paper jams by the following procedure when 
copy paper does not come out of the output port or 
when “” flashes on the Multi-Copy/Error Indicator.
1
Push down the printer open lever to open the 
printer door.
2
Remove the thermal transfer film with both 
hands.
3
Remove the jammed paper.
4
Install the thermal transfer film.
• Refer to steps 3 and 4 in the section of 
“Installing the Thermal Transfer Film” on 
page 10.
• “ ” flashing on the Multi-Copy/Error...

Paper Jams
16
3
To prevent paper jams such as those caused 
by multiple sheets feeding at once, fan the 
paper thoroughly, square it, align it with the 
guide inside, and insert as far as it will go.
Note
• Do not stack more copy paper in the unit 
than the maximum paper limit indicated by 
the guide (see figure) as this may result in 
paper jams. [Note that the unit can hold 
about 40 sheets of paper having a weight of 
80 g/m
2 (20 lb.).]
4
Close the paper cover until a click is heard.
Note
• Close the...

Computer Interfacing
17
Operating Instructions
• Panasonic Document Management System 
(hereafter Panasonic-DMS) uses the TWAIN driver 
to scan images drawn on the screen.
• The Panasonic-DMS has a capability of managing 
documents (image files).
• The printer driver allows the printer to print 
documents from your computer.
■System requirements
*1This electronic board functions with USB 1.1.
*
2Microsoft Windows 98 operating system 
(hereafter Windows 98)
*
3Microsoft Windows Millennium Edition...

Computer Interfacing
18
■Installing the drivers
Before you use the computer interfacing function 
for the first time, install the USB, printer and TWAIN 
driver to your computer by following procedures.
Note
• Do not yet connect a USB cable to the 
electronic board.
1Power on your computer and start Windows*1.
• Log on as an administrator for 
Windows 2000 
or Windows XP.
*
1Microsoft Windows operating system 
(hereafter Windows)
2Insert the CD-ROM into the CD-ROM drive. 
The Setup window will appear...

Computer Interfacing
19
Operating Instructions
8When the following window appears after files 
are copied, power the electronic board on, and 
connect a USB cable from the electronic 
board to your computer.
• Use a shielded USB cable that is certified as 
logo by USB-IF.
9Follow the on-screen instructions if the wizard 
windows appear.
• If the wizard window is displayed to select 
the file (##.inf) for the printer driver in 
Windows XP, select “windows\inf\oem##.inf ”.
• If the wizard window is...

Computer Interfacing
20
5Click [Install Panasonic-DMS Software].
6Click [Install].
• To install the Panasonic-DMS Manual, check 
the [Operating Instructions] check box.
7Read “Software License Agreement” carefully 
and click [Yes].
8Follow the on-screen instructions when 
messages appear.
9When the setup process is completed, restart 
Windows.
• About the Panasonic-DMS, refer to the 
Document Manager System operating 
instructions in the CD-ROM.
■Removing the drivers
If you need to remove the USB driver,...