Panasonic Dmp Bd10 Operating Instructions

							11
RQT8745
Easy Setting
After connecting your new player and pressing the power button, a screen will appear prompting you to perform setup for the basic settings. 
Please follow the guide and perform setup.
Remote control setting
You can configure the remote control TV operation buttons to turn the television on/off, change the television input mode, select the television 
channel and change the television volume. 
Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close 
together. Use “1”, the factory set code, under normal circumstances. 
Preparation
Turn on the television and select the appropriate video input on the 
television.
Press [¦ BD POWER].
Setup screen appears.
Follow the on-screen instructions and make 
the settings with [,,,] and [ENTER].
“On-screen Language”, “TV Aspect” and “Speaker” are set. 
You can also change their settings individually ( “Display” 
and “Connection” tab ➡ 22).
pYou can perform this setup 
anytime by selecting “Easy 
Setting” in Setup menu 
(➡21,“Setup” tab).
Setting the television operation
Point the remote control at the television.
While pressing [RETURN], enter the code with the numbered 
buttons.
e.g., 01: [0] ➡ [1] 
Test by turning on the television and changing channels.
pIf your television brand has more 
than one code listed, select the 
one that allows correct operation.
pIf your television brand is not listed 
or if the code listed for your 
television does not allow control of 
your television, this remote control 
is not compatible with your 
television. Use the television’s 
remote control.
Manufacturer and Code No
Panasonic
National
QUASAR01/02PHILIPS (RC-5)03
RCA05
SAMSUNG14/18/19
FISHER10SANYO10
GE05SHARP06/07
GOLDSTAR15/16/17SONY08
HITACHI12SYLVANIA03
JVC11THOMSON05
LG15/16/17TOSHIBA09
MAGNAVOX03ZENITH04
MITSUBISHI13
When other Panasonic products respond to this remote control

Press [SETUP]. 
Press [,].
Press [,
[ENTER].
	Press [,] to select the code (1, 2, or 3) and press [ENTER].

To change the code on the remote control
While pressing [ENTER], press and hold the numbered button ([1], 
[2] or [3]) for more than 2 seconds.
Press [ENTER].
When the following indicator 
appears on the unit’s display 
and you are unable to operate 
the unit
pPress and hold [ENTER] and the 
indicated number button at the 
same time for more than 2 
seconds.
ENTER
TIPS
NOTE
SetupRemote Control Code
Press“” and “ENTER” togetherfor more than 2 seconds on the remote.
Disc Setup
NOTE
DR
The unit’s remote control code
Getting started Easy Setting / Remote control setting
Getting started 
						

							12
RQT8745
Basic play
Instructions for operations are generally described using the remote control in this manual.
Start play
Preparation
Turn on the television and select the 
appropriate video input on the television 
with the remote control for the television.
Open the front cover.
Press [¦/I POWER] to turn on the unit.
Press [OPEN/CLOSE] to open the disc tray 
and load the disc.
pLoad double-sided discs so the label for the side you want to 
play is facing up.
pDVD-RAM: Remove discs from their cartridges before use.
	Press [](PLAY) to start play.
pWhen a menu screen appears
➡15,Showing disc menu, step pIf the screen prompting you to use the color buttons appears, 
continue to operate with the color buttons on the remote 
control.
  
VIDEO1
Basic playback control
Start play
pIt is not possible to play continuously from one side of a double 
sided disc to the other. You will need to eject the disc and turn it 
over.
Stop
The stopped position is memorized.
Resume play function
Press [] (PLAY) to restart from this position.
pThe disc position is cleared if the tray is opened or [w] is pressed 
several times.
p[DVD-A] [CD] [VCD]
[MP3]: The position is cleared if the unit is turned 
off.
[Note] 
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. 
Press [w] when you have finished playback to protect the unit’s 
motor, your television screen and so on.
Pause
pPress [] again or [](PLAY) to restart play. 
Search/
Slow-motion
Search (During play)
The speed increases up to 5 steps.
pPress [] (PLAY) to revert to normal playback speed.
p[BD-V]: Audio is not heard during all levels of search.
[DVD-V] [DVD-VR] [VCD]: Audio is heard during first level of forward 
search.
[DVD-A] [CD]
[MP3]: Audio is heard during all levels of search.
Slow-motion (During pause)
The speed increases up to 5 steps.
p[BD-V] [VCD]: Forward direction [] only.
pPress [] (PLAY) to revert to normal playback speed.
You can also use Multi-jog to 
Search/Slow-motion. (➡13,Search/
Slow-motion)
Skip
Skip to the title, chapter or track you want to play.
pEach press increases the number of skips.
TIME SLIP STATUS
ENTER
RETURNSUB MENU
ONE TOUCH RECEIVER
 PLAY AUDIOMUTING
POP-UPMENU
DISPLAY
VOLUMECHTV/VIDEO
POWERPOWERBD
VOLUME
SKIP
SEARCH/SLOW
PLAYPAUSESTOP
DIRECTNAVIGATOR
TOPMENU
S
 
PLAY
STOP
PA U S E
SEARCH/SLOW
SKIP
Playback Basic play 
						

							13
RQT8745
Other operations during play
Starting from a selected item
Play starts from the selected title, chapter or track.[MP3] [JPEG]e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]Other discs (You can select a track with DVD-Audio.)
e.g., 5: [0] ➡ [5]
15: [1] ➡ [5]
[DVD-A] Selecting groups
While stopped (screen saver is displayed on the television ➡right)
e.g., 5: [5]
pThis works only when stopped (screen saver is displayed on the television ➡right) with some 
discs.
[VCD] (with playback control)
If you press the numbered buttons while stopped (the above screen saver is displayed on the television) you can 
cancel playback control. (Elapsed play time appears on the unit’s display.)
Open remote 
control cover
Frame-by-frame
While paused, press [] ()or [] ().
Each press shows the next frame.
pPress and hold to change in succession forward or backward.
pPress [] (PLAY) to revert to normal playback speed.
[BD-V] [VCD]Forward direction [] () only.
[BD-V] This function does not work while the BD-J is being executed.
Search/Slow-motion
Forward search: During play, turn the wheel right.
Forward slow-motion: During pause, turn the wheel right.
Backward search: During play, turn the wheel left.
Backward slow-motion: During pause, turn the wheel left.
pPress [] (PLAY) to revert to normal playback speed.
pTurn the Multi-jog lightly. If you press it strongly when turning it, 
[,,,] may be mistakenly activated.
pThe wheel operation can be turned off. Set the “Multi-jog Setting” to “Off” (➡21,“Setup” tab). 
Skipping the specified time (Time Slip) [BD-V] [DVD-VR]
Press [TIME SLIP].
Press [,] to select the time and press [ENTER].
Play skips the specified time.
pEach time you press [,], the time increases [] or decreases [] by 1 minute 
intervals. (Press and hold for 10-minute intervals.)
pThe display automatically disappears after approximately 5 seconds.
ENTER
ENTER
Forward
Backward
TIME SLIP
-5 min
Status messages
The Status display gives you information about what is currently being played. Each time you press the [STATUS] 
button, the information displayed will change.STATUS
PlayBD-Video
 T1     C1     0:05.14
T: Title/Track
C: Chapter
G: GroupPL: Playlist
PBC: Playback 
control
Items change depending on the disc 
played.
No displayCurrent position Type of discPlay status
Elapsed time e.g. [BD-V]
Depending on 
the kind of disc 
or the playback 
status, this 
display may 
not appear.
Changing audio during play
[DVD-VR] [VCD]
StereoMono LMono R

































$
[DVD-VR](Bilingual)
Main Audio ((SAP Audio
[BD-V] [DVD-V] [DVD-A]
You can change the audio channel number each time you press 
the button. This allows you to change things like the soundtrack 
language (➡19, Soundtrack). AUDIO
Play
StereoDVD-RAM
e.g., “Stereo”
is selected
Soundtrack1 ENGDigital  3/2.1ch
e.g., English is selected.
Playback Basic play
Playback 
						

							14
RQT8745
Adjusting picture and sound quality
The purpose of the Re-master function is to add audio to portions of a track where audio was not recorded, or to reproduce audio signals that 
were lost in a natural, rich manner.
GAMMA
3D-NRRE-MASTER INTEGRATED
DNR CONTRAST
BRIGHTNESSCOLORSHARPNESS
Adjusting the picture
During video playback, pressing each of the following buttons will display the 
corresponding on-screen adjustment as shown in the illustration on the right. Adjustments 
are made in units of 1 each time the button is pressed. You can also make the same 
adjustments by pressing the left or right cursor keys. 
Press the buttons below.
ContrastIncreases the contrast between light and dark parts 
of the picture (L7 to K7).GammaAdjusts the brightness of dark portions of the screen 
(0 to K5).
BrightnessBrightens the picture (0 to K15).3D-NR (Noise Reduction)Reduces the rough noise in the background to give 
a greater feeling of depth (0 to K4).
Sharpness Adjusts the sharpness of the edges of the horizontal 
lines (L6 to K6).Integrated DNR 
(Digital Noise Reduction)
Smooths block noise and reduces the smudging 
that appears around contrasting sections of the 
picture (0 to K3).
ColorAdjusts the shade of the picture’s color
(L7 to K7).
 Contrast0
CONTRASTGAMMA
BRIGHTNESS3D-NR
SHARPNESSINTEGRATED
DNR
COLOR
Reproducing more natural audio
Re-master[DVD-V]a [DVD-VR]a[CD]
pDuring multi-channel output
This feature reproduces the frequencies lost during recording to give you a sound closer 
to the original.
pDuring 2 ch output
This feature gives you a more natural sound by adding higher frequency signals not 
recorded on the track. (For example, playing DVD-Video recorded with 48 kHz at 96 kHz.)
Press [RE-MASTER] to select “1”, “2” or “3”.
“Re-Master” has three different modes. Select the one that you like best.
a Tracks recorded with 48 kHz only
pThis may not work depending on the 
disc’s recording.
pWhen connecting with DIGITAL 
AUDIO OUT terminal, the actual 
output sampling frequency depends 
on “Digital Audio Output” setting in 
“Audio” tab (➡ 22).
RE-MASTER
SettingWhen playing LPCM sound
Type of musicOther types of sound
Effect level
1High tempo (e.g., pop and rock) Light
2Various tempos (e.g., jazz) Medium
3Low tempo (e.g., classical) Strong
OffOff Off
NOTE
Playback Adjusting picture and sound quality 
						

							15
RQT8745
Operations using menu screen
Showing Pop-up menu[BD-V] 
The Pop-up menu is a special feature available with some BD-Video discs. This menu may be different depending on discs, and selectable 
items may differ as well. For more information on how to operate the menu on your BD-Video discs please read the operating instructions that 
came with the disc. 
.
Press [POP-UP MENU].
Press [,,,] to select the item and press [ENTER].
pPop-up menu also appears by 
pressing [SUB MENU] and 
selecting “Pop-up menu”.
To exit the screen
pPress [POP-UP MENU].
Showing disc menu[BD-V] [DVD-V] [DVD-A] [VCD]a
This menu may be different depending on discs, and selectable items may differ as well. For more information on how to operate the menu on 
your discs, please read the operating instructions that came with the disc. 
Press [TOP MENU].
[VCD]aPress [RETURN] while playing.
Press [,,,] to select the item and press [ENTER].
[VCD]aPress the numbered buttons to select the item.
e.g., 5: [0]➡ [5] 15: [1]➡ [5]
a With playback control
Using the sub menu to show 
menu screen
 Press [SUB MENU].
Sub menu appears on the 
screen.
Press [,] to select “Pop-up 
menu”, “Top menu” or “Menu” 
and press [ENTER].
Items differ depending on the 
disc type playing.
To exit the screen
pPress [TOP MENU].
Playing programs with the menu screen[DVD-VR]
Press [DIRECT NAVIGATOR].
Press [,,,] to select the program and press [ENTER].
pPress [,] to show other 
pages.
pIf “Album View” or “Picture View” 
screen is displayed, press the “A” 
button to switch to the “Title View” 
screen.
To exit the screen
pPress [DIRECT NAVIGATOR] .
Using the sub menu
While the above screen is displayed
Press [SUB MENU].
The sub menu appears.
Press [,] to select 
the item and press [ENTER].
	Only when “View Chapters” or “View Playlists” is selected
Press [,,,] to select the item and press [ENTER].
Next
Previous
e.g.,
TIPS
SPECIAL FEATURES SCENE SELECTIONLANGUAGES PLAY MOVIE
e.g.,TIPS
Previous
02/02Next
10 10/27 Mon
007008
8 10/27 Mon
- - - - - - - - -- - -
DIRECT NAVIGATOR Title ViewDVD-RAM
PlaySUB MENUS
Picture Video
Page
B
A
NextPrevious
TIPS
Album ViewView PlaylistsView ChaptersPropertiesTo display the title properties (recording date, etc.)
To select the chapter
To select the playlist
➡16, Playing still pictures
Playback Operations using menu screen
Playback 
						

							16
RQT8745
Playing MP3 files and still pictures
You can play MP3 files recorded onto a CD-R/RW.
You can play still pictures recorded onto a DVD-RAM and CD-R/RW.
Playing MP3 files[MP3] 
Press [DIRECT NAVIGATOR].
Press [,] to select the track and press [ENTER].
Play starts on the selected track.
pWhen the JPEG Menu is displayed, 
perform steps below.
1 Press [DIRECT NAVIGATOR] to 
exit menu screen.
2 Set “Mixed Disc—Audio & 
Pictures” to “MP3” 
(➡21, “Disc” 
tab).
pYou can also select the track with 
the numbered buttons. (➡13, 
Starting from a selected item)
pPress [,] to show other 
pages.
To exit the screen
Press [DIRECT NAVIGATOR].
Showing list of groups
While the file list (above) is displayed
Press [] while a track is highlighted to display the tree screen.
Press [,] to select a group and press [ENTER].
The file list for the group appears.
pYou cannot select groups that 
contain no compatible files.
To return to the previous 
screen
Press [RETURN].
Playing still pictures[JPEG]
Press [DIRECT NAVIGATOR].DVD-RAMpWhen “Title View” screen is 
displayed, press the “B” button to 
switch to the “Album View” screen.
CD-R/RWpWhen the MP3 Menu is displayed, 
perform steps below.
1 Press [DIRECT NAVIGATOR] to 
exit menu screen.
2 Set “Mixed Disc—Audio & 
Pictures” to “Pictures” (➡21,
“Disc” tab).
DVD-RAM“Album View” screen is displayedCD-R/RW“Picture View” screen is displayed
➡ Go step 
Press [,,,] to select the album and press [ENTER].pPress [,] to display the 
previous or next still picture.
pUseful functions during still picture 
play (
➡ 17).
pTo select the still pictures in 
another folder (
➡ 17)
pYou can also select the still 
pictures with the numbered 
buttons. (➡13, Starting from a 
selected item)
To return to the previous 
screen
Press [RETURN].
To exit the screen
Press [DIRECT NAVIGATOR].
Press [,,,] to select the still picture and press [ENTER].
001 Both Ends Freezing
002 Lady Starfish
003 Life on Jupiter 
004 Metal Glue 
005 Paint It Yellow
006 Pyjamamama
007 Shrimps from Mars
008 Starry Blue
009 Velvet Cuppermine
010 Ziggy Starfish
Page 001/024 
1
1    :  My favorite
2
3
4
5
6
7
8
9
10 Total                   Track                           Tr e eG            1
T             8
To t a l8/111
Menu
0   –   9No.
Group No.
Prev.Next
ENTER
G: Group No.T: Track No. in the groupTotal: Track No./Total tracks in all 
groups
pFiles are treated as tracks and folders 
are treated as groups.Selected group
“” indicates the track currently playing.NOTE
TIPS
Tr e eG  7/25    001 My favorite
        001 Brazilian pops
        002 Chinese pops
        003 Czech pops
        004 Hungarian pops
 005 Liner notes
        006 Japanese pops
007 Mexican pops        008 Philippine pops
        009 Swedish pops
            001 Momoko
    002 Standard number
        001 Piano solo
        002 Vocal
Menu
No.
G8
T            14
Total       40/111
MP3 music
0   –   9
ENTER
Selected group No. /Total groups
If the group has no track, “– –” is 
displayed as group number.NOTE
TIPS
NOTE
Previous
02/02Next
4/10/05 Total6
- - - - - - - - -- - -
DIRECT NAVIGATOR Album ViewDVD-RAM
ENTERS
Picture Video
Page
B
A
Press ENTER to go to 
Photo: 3/10/2005 My Album2
SUB MENUPicture View 
3/10/05 Total8
007008
Recording date of the first picture in the 
album, number of pictures and album 
name.
PreviousPage 01/01Next
001Folder 100__DVD002003004
005006007008
 009------
Pictures Menu Picture View
Play
CD (JPEG)
---
PreviousPage 001/001Next
0001Photo: 3/10/2005000200030004
0005000600070008
0009------------
DIRECT NAVIGATOR Picture View
PlaySUB MENUS
PictureDVD-RAMVideoA
BAlbum NameTIPS
Playback Playing MP3 files and still pictures 
						

							17
RQT8745
Useful functions during still picture play
Start Slideshow 
You can display still pictures one by one at a constant interval.
While the “Album View” (DVD-RAM) or “Picture View” (CD-R/RW) screen is displayed
Press [,,,] to select the album (for DVD-RAM) or “Folder” (for CD-R/RW) and press [SUB MENU].
Press [,] to select “Start Slideshow” and press [ENTER].
pDVD-RAM only
You can also start slideshow by pressing [] (PLAY) after selecting the album
Slideshow settings
To change the display interval
While the “Album View” (DVD-RAM) or “Picture View” (CD-R/RW) screen is displayed
Press [,,,] to select the album (for DVD-RAM) or “Folder” (for CD-R/RW) and press [SUB MENU].
Press [,] to select “Slideshow settings” and press [ENTER].
	Press [,] to select “Display Interval” and press [,] to select the desired interval (0–30 seconds) and press [ENTER].
To repeat slideshow
After step  above
Press [,] to select “Repeat Play” and press [,] to select “On” or “Off” and press [ENTER].
Rotate
While playing
Press [SUB MENU].
Press [,] to select “Rotate Right” or “Rotate Left” and press [ENTER].
pThe rotation information will not be stored.
Zoom in/Zoom out
This function is only available for still pictures smaller than 640M480 pixels.
While playing
Press [SUB MENU].
Press [,] to select “Zoom in” and press [ENTER].
pTo return the picture to its original size, press [,] to select “Zoom out” in step  and press [ENTER].
pWhen zooming in, the picture may be cut off.
pThe enlargement information will not be stored.
To select the still pictures in another folder
DVD-RAMTo switch to another higher folder
(Only if there is a multiple number of higher folders recognizable)
While the “Album View” screen is displayed 
Press [SUB MENU].
Press [,] to select “Select Root folder” and press [ENTER].
	Press [,] to select the higher folder and press [ENTER].
CD-R/RWWhile the “Picture View” screen is displayed
Press [,,,] to select “Folder” and press [ENTER].
Press [,] to select the folder and press [ENTER].
Select folder to access.
Press ENTER to confirm.
Select Root folder
\DCIM
001 Folder100__DVD002003004
000500060007008
Pictures Menu Picture ViewCD (JPEG)F  1/3021216_0026
103_DVD
104_DVD
To show the picture properties
While playing
Press [STATUS] twice.
To exit the picture properties screen, press [STATUS].
Folder - Picture # :           102 - 0001
Date:        11 / 12 / 2005                   No. :  3 /    9
Shooting date e.g. JPEG on DVD-RAM
Playback Playing MP3 files and still pictures
Playback 
						

							18
RQT8745
Control with HDMI 
(EZ Sync
TM HDAVI Control)
EZ Sync HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic television (VIERA) or amplifier/receiver 
under EZ Sync HDAVI Control.You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for 
connected equipment for operational details.
pIt is recommended that you use Panasonic’s HDMI cable.
Recommended part number: 
RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG30 (3.0 m/9.8 ft.), 
RP-CDHG50 (5.0 m/16.4 ft.), etc.
pNon-HDMI-compliant cables cannot be utilized.
pAfter connecting the unit to a television using an HDMI cable, 
set “Ctrl with HDMI” to “On” (➡23).
pSet the EZ Sync HDAVI Control operations on the connected 
equipment (e.g., television).
pTurn on all EZ Sync HDAVI Control compatible equipment, turn 
the television off and on, and then select this unit’s input 
channel on the connected television so that the EZ Sync HDAVI 
Control function works properly. Also when the connection or 
settings are changed, repeat this procedure.
What is EZ Sync HDAVI Control?
Functions made possible with EZ Sync HDAVI Control are...
One touch play
You can turn on this unit, television and amplifier/receiver, and start playing the disc in the 
play position with a single press of a button.
Press [ONE TOUCH PLAY].
pWhen operating, point the remote control at the remote control 
signal sensor on the main unit. 
Automatic input switching
When the following operations are performed the television will automatically switch the 
input channel and displays the corresponding action.
–When play starts on the unit
–When an action that uses the display screen is performed (e.g., Direct Navigator screen)
Power on link
When the television is off and the following operations are performed, the television will 
automatically turn on and displays the corresponding action.
–When play starts on the unit
–When an action that uses the display screen is performed (e.g., Direct Navigator screen)
Power off link
All connected equipment compatible with EZ Sync HDAVI Control including this unit 
automatically turns off when you switch the television off.
pThis unit automatically turns off even during playback or any other operation.
pOnly this unit turns off when you press the power button of the unit or the remote control 
for shutting it down. Other connected equipment compatible with EZ Sync HDAVI Control 
stays on.
pWhen [ONE TOUCH PLAY] or 
[] (PLAY) is pressed on this unit 
for “Automatic input switching” or 
“Power on link”, the playback 
image is not immediately displayed 
on the screen and it may not be 
possible to watch the contents from 
where playback started.
In this case, press [] or []
to go back to where playback 
started.
AV OUT
Please see page 8 (connection ) or 9 (connection ) for detailed 
setup.HDMI IN
HDMI AV OUT This unit EZ Sync HDAVI 
Control 
compatible 
television
HDMI OUT HDMI IN
EZ Sync HDAVI 
Control compatible 
amplifier/receiver
ONE TOUCH  PLAY
NOTE
PlaybackControl with HDMI (EZ SyncTM HDAVI Control) 
						

							19
RQT8745
Changing settings with the On-screen 
menu
The On-screen menu is a menu that appears on screen, regardless of whether a disc 
is being played or stopped, when [DISPLAY] is pressed. The On-screen menu allows 
you to turn subtitles on or off, switch audio tracks, and change a variety of other 
settings.
(Continued on the next page)
What is On-screen menu?
On-screen menu operations
Press [DISPLAY] to show On-screen menu.
Press [,] to select the menu and press [].
Press [,] to select the item and press [].
	Press [,] to select the setting.
pDepending on the condition of the 
unit (playing, stopped, etc.) and 
disc contents, there may be some 
items that you cannot select or 
change.
pSome items can be changed by 
pressing [ENTER].
To exit the On-screen menu
Press [DISPLAY].
What you can change with On-screen menu
MenusItemsSettings and details
DiscSoundtracka[BD-V] [DVD-V] [DVD-A]
Select the audio and language (➡below, Language, Audio attribute).
[DVD-VR] 
The disc’s audio attributes appear (➡below, Audio attribute).
[VCD](SVCD)
Select the soundtrack number.
Soundtrack numbers are displayed even when there is only one audio type.
Subtitle
a[BD-V] [DVD-V] 
Turn the subtitle on/off and select the language (➡below, Language).
[DVD-VR]
(Only discs that contain subtitle on/off information)
Turn the subtitle on/off.
[VCD](SVCD)
Turn the subtitle on/off and select the subtitle number.
Subtitle numbers are displayed even if there are not multiple subtitles.
Subtitle Style[BD-V]
Select the subtitle style.
PBC 
(Playback control 
➡29)[VCD]
Indicates whether menu play (playback control) is on or off.
Audio channel[DVD-VR] [VCD]
➡13, Changing audio during play
Angle
a[BD-V] [DVD-V]
Change the number to select an angle.
Still-P
(Still picture) [DVD-A]
Selects the play method for still pictures.
pSlide Show: Plays according to the default order on the disc.
pPa g e: Select the still picture number and play.
pRandom:Plays in random order.
pReturn:Returns to the default still picture on the disc.
aYou may have to use the menus on the disc to make changes (➡15).
LanguageAudio attribute
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: NorwegianDAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: VietnameseTHA: Thai
POL: Polish
CES: Czech
SLK: Slovak
HUN: Hungarian
FIN: Finnish
_: OthersLPCM/PPCM/§Digital/§Digital +/
§TrueHD/DTS-HD/DTS/MPEGSignal type
ch (channel) Number of channels
k (kHz) Sampling frequency
b (bit) Number of bits
Disc
VideoAudio
Other
PlaySoundtrack
Subtitle1
Audio channel
Off
Stereo Digital   2/0ch
Menus Items Settings
NOTE
TIPS
Settings Changing settings with the On-screen menu
Settings
Playback 
						

							20
RQT8745
MenusItemsSettings and details
PlayRepeat play(Only when the elapsed time is being displayed on the unit display.)
Selects the item which you want to repeat. The items displayed differ depending on the type of 
disc.
pAllEntire disc
pChapterChapter
pGroupEntire group
pPLPlaylist
pTitleTitle (DVD-Video, etc.)
pTr a c kTrack
pOff
Select “Off” to cancel.
VideoPicture[BD-V] [DVD-V] [DVD-VR] [VCD]
Select the picture quality mode during play.
pNormal
:Default setting
pSoft:Soft picture with fewer video artifacts
pFine:  Details are sharper
pCinema:Mellows movies, enhances detail in dark scenes.
pUser:You can make further adjustments.
Press [,,,] to select “Picture adjustment” and press [ENTER].
If the video adjustment buttons on the remote control are used, the setting is 
automatically changed to “User”.
Contrast
:Brightness:Sharpness:Color:Gamma: 3D Noise Reduction: Integrated DNR:
➡For details, see page 14
DNR[BD-V] [DVD-V] [DVD-VR] [VCD]
Reduces mosaic-like distortion and picture degradation.
On↔Off
Progressive
aSelect “On” to enable progressive output.
pDepending on the type of television used, the video may be stretched horizontally when video 
is output in progressive mode. When this occurs, select “Off” and the video will then be 
output as “480i”.
pThis setting will be fixed to “On” if you connect with an HDMI cable and set “HDMI Video 
Mode” to “On” (➡23, “HDMI” tab).
pWhen progressive output is on, closed captions cannot be displayed.
Transfer
a[When “Progressive” (➡above) is set to “On”.]
Select the method of conversion for progressive output to suit the type of material being played 
(➡29, Glossary, Film and video).
pAuto1 (normal)
:Automatically detects the film and video content, and appropriately converts 
it.
pAuto2
:In addition to “Auto1”, automatically detects film contents with different 
frame rates and appropriately converts it.
pVideo
:Select when using “Auto1” and “Auto2”, and the content is distorted.
4:3 Aspect[BD-V] [DVD-V] [DVD-VR] [VCD]
You can select how images made for 4:3 aspect screens are displayed on a 16:9 aspect 
television.
pZoom: Makes 4:3 letterbox video expand to full screen on a wide screen television (16:9).
pNormal: The picture is displayed as a 4:3 ratio image in the center of the screen.
AudioV. Surround Sound[DVD-V] [DVD-VR]
(Dolby Digital with 2 channels or more only)
Enjoy a surround-like effect if you are using two front speakers only.
pEmphasis
pNatural
pOff
pTurn V. Surround Sound off if it causes distortion.
pDo not use in combination with surround effects on other equipment.
pV. Surround Sound does not work for bilingual recordings.
Dialog Enhancer[BD-V] [DVD-V] [DVD-VR] 
(Dolby Digital with 3 channels or more only, including a center channel)
The volume of the center channel is raised to make dialog easier to hear.
On↔Off
Re-master [DVD-V] [DVD-VR] [CD]
p1–3, Off
(➡14, Reproducing more natural audio)
Digital FilterWhen audio is output from 2ch or 7.1ch AUDIO OUT terminals (➡8–10)
pNormal:  A clear timbre.
pSlow: Gives music atmosphere, with softness and a feeling of depth.
OtherPo s i tio nSelect the position of the On-screen menu.
p1 (Standard): Highest
to
p5 : Lowest
aOnly when you have selected “480p”, “720p”, “1080i” in “Component Video Resolution” (➡22 “Connection” tab)
Settings Changing settings with the On-screen menu