Panasonic DLP Projector PT-DZ780 PT-DW750 PT-DX820 Operating Instructions

							Chapter 6 Appendix — Specifications
ENGLISH - 191
 rApplicable scanning frequency
Refer to “List of compatible signals” ( x   page   186) for the types of video signals that can be used with the 
projector.
For video signal Horizontal: 15.73   kHz, Vertical: 59.94   Hz; Horizontal: 15.63   kHz, Vertical: 50   Hz
For Y/C signal
For RGB signal Horizontal: 15
  kHz to 100   kHz, Vertical: 24   Hz to 120   Hz
PIAS (Panasonic Intelligent Auto Scanning) system
 f Dot clock frequency: 162

  MHz or less
For YC
BCR/YPBPR signal
 f 525i (480i)
Horizontal: 15.73
   kHz, Vertical: 59.94   Hz
 f
525p (480p)
Horizontal: 31.47
   kHz, Vertical: 59.94   Hz
 f
750 (720)/60p
Horizontal: 45
   kHz, Vertical: 60   Hz
 f
1
 125 (1035)/60i
Horizontal: 33.75   kHz, Vertical: 60   Hz f
1 125 (1080)/50i
Horizontal: 28.13   kHz, Vertical: 50   Hz
 f1

125 (1080)/24sF
Horizontal: 27
  kHz, Vertical: 48   Hz
 f1

125 (1080)/30p
Horizontal: 33.75
  kHz, Vertical: 30   Hz
 f1

125 (1080)/50p
Horizontal: 56.25
  kHz, Vertical: 50   Hz
 f625i (576i)
Horizontal: 15.63
   kHz, Vertical: 50   Hz
 f
625p (576p)
Horizontal: 31.25
   kHz, Vertical: 50   Hz
 f
750 (720)/50p
Horizontal: 37.5
   kHz, Vertical: 50   Hz
 f
1
 125 (1080)/60i
Horizontal: 33.75   kHz, Vertical: 60   Hz f
1 125 (1080)/24p
Horizontal: 27   kHz, Vertical: 24   Hz
 f1

125 (1080)/25p
Horizontal: 28.13
  kHz, Vertical: 25   Hz
 f1

125 (1080)/60p
Horizontal: 67.5
  kHz, Vertical: 60   Hz
 fThe SYNC/HD and VD terminals do not support 3 value SYNC.
For DVI

-
D signal 525i (480i)
*1, 625i (576i)*1, 525p (480p), 625p (576p), 750 (720)/60p, 
 
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 f Displayable resolution: VGA

 to WUXGA (non-interlaced)
 fDot clock frequency: 25

  MHz to 162   MHz
For HDMI signal 525i (480i)
*1, 625i (576i)*1, 525p (480p), 625p (576p), 750 (720)/60p, 
 
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 f Displayable resolution: VGA

 to WUXGA (non-interlaced)
 fDot clock frequency: 25

  MHz to 162   MHz
For SDI signal
(Only for PT
-

DZ780) SD
-
SDI signal SMPTE ST 259 compliant
YC
BCR 4:2:2 10-bit
480i, 576i
Single link HD
-
SDI signal SMPTE ST 292 compliant
YP
BPR 4:2:2 10-bit
720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 
1080/24p, 1080/24sF
, 1080/30p
3G
-
SDI signal SMPTE ST 424 compliant
YP
BPR 4:2:2 10-bit
1080/50p, 1080/60p
RGB 4:4:4 12
- bit/10 - bit
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
*1 Pixel-Repetition signal (dot clock frequency 27.0   MHz) only
Note
 fDIGITAL LINK input compatible signal is the same as HDMI input compatible signal.  
						

							Chapter 6 Appendix — Specifications
192 - ENGLISH
 rTerminal
 terminal 1 set (BNC x 5 (RGB/YP
BPR/YCBCR/YC/VIDEO x 1))
RGB signal 0.7
 
V [p-p] 75   Ω (SYNC ON GREEN: 1.0   V [p-p] 75   Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
Y/C signal Y
: 1.0
 
V [p-p], C: 0.286
 
V [p-p] 75
 
Ω
VIDEO signal BNC: 1.0
 
V [p-p], 75
 
Ω
 terminal 1 set, high-density D
-
Sub 15
 
p (female)
RGB signal 0.7
 
V [p-p] 75
 
Ω (SYNC ON GREEN: 1.0
 
V [p-p] 75
 
Ω)
SYNC/HD TTL high impedance, automatic positive/negative 
polarity compatible
VD TTL high impedance, automatic positive/negative 
polarity compatible
YP
BPR signal Y: 1.0   V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
 terminal 1 set, DVI
-
D 24
 
p, single link, DVI 1.0 compliant, HDCP compatible
 terminal 1 set, HDMI 19
 
p, HDCP compatible, Deep Color compatible
 terminal
(Only for PT
-

DZ780) 1 set (BNC)
SD
-
SDI signal SMPTE ST 259 compliant
HD
-
SDI signal SMPTE ST 292 compliant
3G
-
SDI signal SMPTE ST 424 compliant
/ 
terminal D
-
Sub 9
 
p, 1 set each, RS
-
232C compliant, for computer control
/ terminal M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
 terminal 1 set, D
-
Sub 9
 
p, for contact control
 terminal 1 set, RJ
-
45, for network and DIGITAL LINK connections, PJLink compatible, 100Base - TX, Art-Net 
compatible
 terminal USB connector (type A) x 1, for power supply only (DC 5
 
V, maximum 900
 
mA)
Note
 f The model numbers of accessories and optional accessories are subject to\
 change without prior notice.  
						

							Chapter 6 Appendix — Dimensions
ENGLISH - 193
Dimensions
Unit: mm
208 (8-3/16)249 (9-13/16)
498 (19-19/32) 424.5 (16-23/32)
416 (16-3/8)
20 (25/32)
95.5 (3-3/4) 175 (6-7/8) 23 (29/32)
498 (19-19/32)
* The above dimensions are obtained when the standard zoom lens is attache\
d.
*  Actual dimensions may dif fer depending on the product.  
						

							Chapter 6 Appendix — Precautions for attaching the Ceiling Mount Bracket
194 - ENGLISH
Precautions for attaching the Ceiling Mount Bracket
 fWhen installing the projector to the ceiling, be sure to use the optional Ceiling Mount Bracket (Model No.: 
ET
-

PKD120H (for high ceilings), ET
-
 PKD120S (for low ceilings), ET
-
 PKD130H (for High Ceilings, 6-axis 
Adjustment), ET
-

PKD130B (Projector Mount Bracket)) specified by Panasonic. The Ceiling Mount Bracket 
(Model No.: ET
-

PKD120H (for high ceilings), ET
-
 PKD120S (for low ceilings), ET
-
 PKD130H (for High Ceilings, 
6-axis Adjustment)) is used in combination with the Ceiling Mount Bracket (Model No.: ET
-

PKD130B (Projector 
Mount Bracket)).
 f When installing the projector

, attach the drop-prevention set that comes with the ceiling mount brack\
et to the 
projector. When the drop-prevention kit (Service Model No.: TTRA0214) is necessary, consult your dealer.
 f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
 fPanasonic takes no responsibility for any damage to the projector result\
ing from use of a ceiling mount bracket 
not manufactured by Panasonic or the inappropriate choice of location fo\
r installation, even if the warranty 
period of the projector has not expired.
 fUnused products must be removed promptly by a qualified technician.
 fUse a torque screwdriver or 

Allen torque wrench to tighten bolts to their specified tightening torques. Do not use 
electric screwdrivers or impact screwdrivers.
 f Read the Installation Instructions for the ceiling mount bracket for det\
ails.
 fThe model numbers of accessories and optional accessories are subject to\
 change without prior notice.


M6
Bottom view
Model No. of Ceiling Mount Bracket: ET-PKD120H (for high ceilings)ET-PKD120S (for low ceilings)
12 mm (15/32)
Torque: (M6) 4 ± 0.5 N·m ET-PKD130H (for High Ceilings, 6-axis Adjustment)
ET-PKD130B (Projector Mount Bracket)  
						

							Index
ENGLISH - 195
AAccessories    22
 terminal
     25, 55
Adjusting adjustable feet
     46
[ADV
ANCED MENU]
     73, 88
[AI]
     81
Air filter
     164
Art-Net
     20, 175
[Art-Net SETUP]
     141
[ASPECT]
     83
Automatic setup function
     68
[AUT
O SETUP]
     96
 button
Projector body
    
 26, 68
Remote control
     24, 68
[AUT
O SIGNAL]
     96
B[BACK COLOR]    106
[BACKUP
 INPUT SETTING]
     97
[BLANKING]
     88
[BRIGHTNESS]
     76
[BRIGHTNESS CONTROL]
     11 4
CCautions on use      21
Cautions when installing
     18
Cautions when transporting
     18
Ceiling Mount Bracket
     194
[CLAMP
 POSITION]
     89
[CLOCK PHASE]
     85
[CLOSED CAPTION SETTING]
     106
[COLOR]
     77
[COLOR CORRECTION]
     95
[COLOR MA
TCHING]
     94
[COLOR 
TEMPERATURE]
     77
Connecting the power cord
     55
Connecting the remote control to the projector 
with a cable
    
 29
Connection
     49
[CONTRAST]
     76
[CONTROL
 DEVICE PASSWORD CHANGE]
     136
[CONTROL
 DEVICE SETUP]
     135
[COOLING CONDITION]
     11 2
[Crestron Connected(TM)]
     158
[CUT
 OFF]
     11 0
D[DATE AND TIME]      124
 button
Remote control
    
 24, 72
Deleting the registered signal
     131
[DIGIT
AL CINEMA REALITY]
     88
DIGIT
AL LINK
     20
 button
Projector body
    
 26, 67
Remote control
     24, 67
[DIGIT
AL LINK IN]
     102
[DIGIT
AL LINK MENU]
     141
[DIGIT
AL LINK MODE]
     138
[DIGIT
AL LINK SETUP]
     138
[DIGIT
AL LINK STATUS]
     139
Dimensions
     193
Display language
     74, 93
[DISPLA
Y OPTION]
     74, 94
[DISPLA
Y SETTING]
     134
Disposal
     21
 button Projector body
    
 26, 67
Remote control
     24, 67
[DVI-D IN]
     99
EEarly Warning Software     21
[EDGE BLENDING]
     90
 button Projector body
    
 26
Remote control
     24
Expanding signal lock-in range
     132
FFilter indicator    162
 button Remote control
    
 24, 62
[FRAME RESPONSE]
     91
[FREEZE]
     108
Function button
     68
 button Remote control
    
 24, 68 [FUNCTION BUTT ON]  
  
 124
G[GAMMA]    79
[GEOMETR
Y]
     85
H button
Projector body     26, 67
Remote control
     24, 67
[HDMI IN]
     101
I button
Remote control     24, 69
[INITIALIZE]
     126
Initial settings
     57
[INITIAL
 STARTUP]
     120
[INPUT
 RESOLUTION]
     89
Installation mode
     31
LLamp indicator     162
[LAMP
 POWER]
     11 3
[LAMP
 RELAY]
     11 3
[LAMP
 SELECT]
     11 2
 button Projector body
    
 26, 62
[LENS CALIBRA
TION]
     125
List of compatible signals
     186
[LOAD 
ALL USER DATA]
     126
MMain menu     72
Main power switch
     25, 56
Maintenance
     164
 button Projector body
    
 26, 71
Remote control
     24, 71
Menu item
     73
NNavigating through the menu     71
[NETWORK]
     75, 138
Network connection
     142
[NETWORK CONTROL]
     140
[NETWORK SETUP]
     139
[NETWORK ST
ATUS]
     140
[NOISE REDUCTION]
     80
[NO SIGNAL
 SHUT-OFF]
     124
O button
Remote control     24, 66
[ON-SCREEN DISPLA
Y]
     104
On-screen menu
     71
Optional accessories
     23
P[PICTURE]    73, 76
[PICTURE MODE]
     76
[P
 IN P]
     75, 128
P
 IN P function
     128
[POSITION]
     73, 83
Power cord
     55
Power indicator
     55
Power on button Projector body
    
 26
Remote control
     24
Power standby button Projector body
    
 26
Remote control
     24
Precautions for attaching the Ceiling Mount 
Bracket
    
 194
Precautions for use
     18
Projecting
     62
[PROJECTION METHOD]
     111
Projector body
     25
[PROJECT
OR ID]
     111
[PROJECT
OR SETUP]
     74, 111
Protecting the registered signal
     132
R[RASTER POSITION]    92
Read this first!
     5
Registering new signals
     131
 terminal
     29
 terminal
     29
 terminal
     184 [REMOTE2 MODE]  
   124
Remote control
    24
Remote control operations
    66
Removing/attaching the projection lens
     47
Renaming the registered signal
     131
Replacement
    166
Replacing the air filter
    168
Replacing the lamp unit
    166
Resetting to the factory default
     72
 button Remote control
 
   24, 67
 button Projector body
 
   26, 67
 button Projector body
 
   26, 67
[RGB IN]
    98
[RS-232C]
    121, 180
S[SAVE ALL USER DATA]    126
[SCHEDULE]
    11 9
[SCREEN SETTING]
    95
 button Projector body
 
   26, 67
Remote control
    24, 67
[SDI IN]
    103
Security
    20
[SECURITY]
    75, 134
[SECURITY
 PASSWORD]
     134
[SECURITY
 PASSWORD CHANGE]
     134
Selecting the input signal
    62
 terminal
    180
 terminal
    180
[SER
VICE PASSWORD]
    127
Setting the remote control ID numbers
     69
Setting up
    31
[SHARPNESS]
    80
[SHIFT]
    83
 button Remote control
 
   24, 62
 button Projector body
 
   26, 66
Remote control
    24, 66
[SHUTTER SETTING]
    108
[SIGNAL
 LIST]
    75, 131
Specifications
    189
sRGB-compliant video
    81
[ST
ANDBY MODE]
    11 8
[ST
ARTUP INPUT SELECT]
     120
[ST
ARTUP LOGO]
    107
[ST
ATUS]
    122
 button
Remote control
 
   24, 67
Sub memory
    133
Switching of
f the projector
    61
Switching on the projector
    56
Switching the input signal
    67
[SYSTEM DA
YLIGHT VIEW]
     80
[SYSTEM SELECT
OR]
    81
TTemperature indicator    163
[TEST
 PATTERN]
    75, 130
 button
Remote control
 
   24, 68
[TEXT
 CHANGE]
    135
[TINT]
    77
T
roubleshooting
    169
T
wo-window
    185
U[UNIFORMITY]    107
Upgrade Kit
    186
V button Remote control     24, 67
W[WAVEFORM MONITOR]    108
[WHITE GAIN]
    79
Z[ZOOM]    84
 button Remote control
 
   24, 62
Index   
						

							Information for Users on Collection and Disposal of Old Equipment and us\
ed Batteries
These symbols on the products, packaging, and/or accompanying documents \
mean that used 
electrical and electronic products and batteries should not be mixed with general household 
waste. For proper treatment, recovery and recycling of old products and \
used batteries, please 
take them to applicable collection points, in accordance with your natio\
nal legislation and the 
Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources 
and prevent any potential negative effects on human health and the environment which could 
otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and \
batteries, please contact 
your local municipality, your waste disposal service or the point of sale where you purchased t\
he 
items.
Penalties may be applicable for incorrect disposal of this waste, in acc\
ordance with national 
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier 
for further information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to disca\
rd these items, please 
contact your local authorities or dealer and ask for the correct method \
of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this\
 case it complies with 
the requirement set by the Directive for the chemical involved.
Product Information (for Turkey only)
AEEE Yönetmeliğine Uygundur.
Eski Ekipman ve Bataryaların İşlenmesi.
Sadece geri dönüşüm sistemleri olan Avrupa Birliği ve ülkeleri için geçerlidir.
Ürünler, ambalaj ve/veya ekli belgeler üzerindeki bu semboller kullanılmış elektrik ve elektronik 
ürünlerin ve pillerin genel ev atığı ile karıştırılmaması gerektiğini ifade eder.
Eski ürünlerin ve pillerin toplanması ve geri kazanılması için bu atıkları lütfen yasayla belirlenmiş 
olan uygun toplama merkezlerine teslim ediniz.
Bu atıkların doğru işlenmesiyle, değerli kaynakların korunmasına ve insan sağlığı ve çevreye 
olası negatif etkilerinin engellenmesine yardımcı olabilirsiniz.
Atıkların toplanması ve geri dönüşümü için detaylı bilgi için lütfen bağlı olduğunuz yerel 
yönetimlerle iletişime geçiniz.
Atıkların atılmasıyla ilgili yanlış uygulamalar yasayla belirlenmiş olan cezalara sebebiyet verebilir.
W0415NN1125 -YI
Panasonic System Communications Company of North America
5th Floor, Two Riverfront Plaza, Newark, NJ 07102-5490
TEL: (877) 803 - 8492
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TEL: (905) 624 - 5010
Panasonic Corporation
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2015