Panasonic DLP Projector PT-DZ780 PT-DW750 PT-DX820 Operating Instructions

							Chapter 4 Settings — [NETWORK] menu
ENGLISH - 141
[DNS2]Displays the address of the secondary DNS server.
[MAC ADDRESS] Displays the [MAC ADDRESS].
[DIGITAL LINK MENU]
When the optional DIGITAL LINK output supported device (Model No.: ET- YFB100G, ET- YFB200G) is connected 
to the  terminal, the main menu of DIGITAL LINK output supported device is displayed. 
Refer to the Operating Instructions of the DIGITAL LINK output supported device for details.
Note
 f When [EXTRON XTP] is set to [ON], [DIGIT AL LINK MENU] cannot be selected. fThe operation guidance for the “RETURN” button is displayed on the menu screen of the Digital Interface Box and DIGIT AL
 LINK Switcher. 
The projector does not have the “RETURN” button, but same operation is available with the  button.
[Art-Net SETUP]
Make settings to use the Art-Net function. For the channel definitions used for controlling the projector with the Art-
Net function, refer to “Using Art-Net function” (x   page   175).
1)
 
Press 
 as to select [Art-Net SETUP].
2)
 
Press 
 qw to select an item.
 fThe items will switch each time you press the button.
[OFF] Disables the Art-Net function.
[ON(2.X.X.X)] Enables the Art-Net function and sets the IP address to 2.X.X.X.
[ON(10.X.X.X)] Enables the Art-Net function and sets the IP address to 10.X.X.X.
[ON(MANUAL)] Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].
 fWhen other than [OFF] is selected, proceed to Step  3).
3)
 
Press the  button.
 f The 

[Art-Net SETUP] screen is displayed.
4)
 
Press 
 as to select [CHANNEL SETUP].
5)
 
Press 
 qw to switch the item.
[DEFAULT] Uses the channel assignment with the standard setting for the projector.
[USER] Uses to change the channel assignment.
[DZ870/DZ21K] Uses the channel assignment with DZ870 series and DZ21K series compatible.
DZ870 series: DZ870 series, DW830 series, DX100 series
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
 f
When [DEF AULT] or [DZ870/DZ21K] is selected, pressing the  button displays the function 
assigned to the channel.
 f When [DEF

AULT] or [DZ870/DZ21K] is selected, proceed to Step 9).
6)
 
Press the  button.
 f The 

[CHANNEL SETUP] screen is displayed.
7)
 
Press 
 as to select the channel to set, and press  qw to switch the item.
[LIGHT OUTPUT]Adjusts the amount of light.
[INPUT SELECT] Switches the input.
[LENS POSITION] Moves the lens position.
[LENS H SHIFT] Adjusts the lens shift in the horizontal direction.
[LENS V SHIFT] Adjusts the lens shift in the vertical direction.
[LENS FOCUS] Adjusts the focus.
[LENS ZOOM] Adjusts the zoom.
[POWER] Controls the power status.
[SHUTTER] Controls the shutter.
[GEOMETRY] Performs geometric adjustment.
[CUSTOM MASKING]
*1Performs geometric adjustment using the computer.
To use PC-1, PC-2, and PC-3, the optional Upgrade Kit (Model No.: ET
-
 UK20) is required.   
						

							Chapter 4 Settings — [NETWORK] menu
142 - ENGLISH
[FREEZE]Freezes the projected image.
[COLOR] Adjusts the color saturation.
[TINT] Adjusts the tint.
[RASTER PATTERN] Displays the raster pattern.
[ENABLE / DISABLE] Enables/disables the control of the projector with the Art-Net function.
[NONE] No definition
*1 Only for PT-DZ780
 fThe settings can be made by pressing  as  to select the channel to set and pressing the  button 
to display the item list, and pressing  as to select an item, and then pressing the  button.
 fSame item cannot be set for multiple channels, except for [NONE].
8)

 
Press the  button.
 f The 

[Art-Net SETUP] screen is displayed.
9)
 
Press 
 as to select an item, and press qw to switch the settings.
[NET] Enter [NET] to be used when the projector processes Art-Net.
[SUB NET] Enter [SUB NET] to be used when the projector processes Art-Net.
[UNIVERSE] Enter [UNIVERSE] to be used when the projector processes Art-Net.
[START ADDRESS] Enter [START ADDRESS] to be used when the projector processes Art-Net.
10) Press as to select [STORE], and press the  button.
11)  
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP  address is calculated and set automatically.
Network connection
The projector has a network function, and the following operations are a\
vailable from the computer using the web 
control.
 fSetting and adjustment of the projector
 fDisplay of the projector status
 fSending E-mail messages when there is a problem with the projector
The projector supports “Crestron Connected
TM”, and the following application software of Crestron Electronics, 
Inc. can be used.
 f RoomV

iew Express
 f Fusion R

V
 f RoomV

iew Server Edition
Attention
 f When a LAN cable is directly connected to the projector , the network connection must be made indoors.
Note
 f“Crestron ConnectedTM” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems 
connected to the network using a computer.
 f For details of “Crestron ConnectedTM”, refer to the website of Crestron Electronics, Inc. (English only)
URL http://www.crestron.com
To download “RoomView Express”, go to the following website of Crestron Electronics, Inc. (English only)
URL http://www.crestron.com/getroomview
 f A

 LAN cable is required to use the network function.   
						

							Chapter 4 Settings — [NETWORK] menu
ENGLISH - 143
 rExample of a normal network connection
Computer
Projector
LAN cable (straight) LAN cable (straight) Hub
 fA web browser is required to use network function. Confirm that the web browser can be used beforehand.
Compatible browser: Internet Explorer 8.0/9.0/10.0/11.0 (Windows OS), Safari 6.0/7.0/8.0 (Mac OS)
 f Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.
 fUse a LAN cable that is compatible with category 5 or higher

.
 fUse a LAN cable of 100

  m (328'1") or shorter.
Connecting to a twisted-pair-cable transmitter
The projector has a function that can receive Ethernet signals from a tw\
isted-pair-cable transmitter together 
with video and audio signals via a LAN cable. Connect a LAN cable to the  terminal of the 
projector. (x pages 20, 27)
 r Example of network connections via a twisted-pair-cable transmitter
Computer
Projector
LAN cable (straight) LAN cable (straight)
LAN cable (straight)
Twisted-pair-cable transmitter
Hub   
						

							Chapter 4 Settings — [NETWORK] menu
144 - ENGLISH
 fFor the LAN cable between the twisted-pair-cable transmitter and the projector , use a cable that meets the following criteria:
 gCompatible with CA

T5e or higher
 gShielded type (including connectors)
 gStraight-through
 gSingle wire
 fThe maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100

  m (328'1"). It is possible to 
transmit up to 150
  m (492'2") if the twisted-pair-cable transmitter supports the long-reach communication method. If this distance is 
exceeded, image may be disrupted or a malfunction may occur in LAN communication.
 f When laying cables between the twisted-pair-cable transmitter and the pr\
ojector

, check that cable characteristics are compatible with 
CAT5e or higher using tools such as a cable tester or cable analyzer.
When a relay connector is used, include it in the measurement.
 f Do not use a hub between the twisted-pair-cable transmitter and the proj\
ector

.
 fDo not pull cables forcefully

. In addition, do not bend or fold cables unnecessarily.
 fT

o reduce the effects of noise as much as possible, stretch out the cables between the t\
wisted-pair-cable transmitter and the projector 
without any loops.
 f Lay the cables between a twisted-pair-cable transmitter and the projecto\
r away from other cables, particularly power cables.
 fWhen laying multiple cables, run them side by side along the shortest di\
stance possible without bundling them together

.
 fAfter laying the cables, confirm that the value of [SIGNAL

 QUALITY] in the [NETWORK] menu → [DIGITAL LINK STATUS] is displayed in 
green to indicate normal quality. (x
  page   139)
 fFor twisted-pair-cable transmitters of other manufacturers of which the operation has been verified with the projector , refer to the 
Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for 
the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by 
the devices of other manufacturers, contact the respective manufacturers\
.
Accessing from the web browser
1) Start up the web browser on the computer .
2)  
Enter the IP
  address set on the projector into the URL entry field of the web browser.
3)
 
Enter the user name and the password.
 fThe factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the 
password is panasonic (lower case).   
						

							Chapter 4 Settings — [NETWORK] menu
ENGLISH - 145
4) Click OK.
 fThe [Projector status] page is displayed.
Note
 f If you use a web browser to control the projector , set [WEB CONTROL] to [ON] in [NETWORK CONTROL] ( x   page   140). fDo not perform setting or control simultaneously by starting up multiple\
 web browsers. Do not set or control the projector from multiple 
computers.
 fChange the password first. ( x

  page   157)
 fThe administrator rights allow use of all functions. 

The user rights allow use of [Projector status] (x   page   146), confirmation of the error 
information page ( x
  page   147), [Network status] (x   page   148), [Basic control] (x   page   150), and [Change password] (x
  page   157) 
only.
 f Access will be locked for few minutes when an incorrect password is entered three times consecutively . fSome items on the projector setting page use the Javascript function of the web browser . 

The projector may not be able to be controlled 
properly if this function is disabled on the browser settings.
 f If the screen for the web control is not displayed, consult your network\
 administrator

.
 fWhile updating the screen for the web control, the screen may appear whi\
te for a moment, but it is not a malfunction.
Descriptions of items
1
2
3
4
5
6
1 Page tab
Switches pages by clicking this item.
2
 
[Status]
The status of the projector is displayed by clicking this item.
3

 
[Projector control]
The [Projector control] page is displayed by clicking this item. 4

 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5
 
[Change password]
The [Change password] page is displayed by clicking this item.
6

 
[Crestron Connected(TM)]
The operation page of Crestron ConnectedTM is displayed by 
clicking this item.   
						

							Chapter 4 Settings — [NETWORK] menu
146 - ENGLISH
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
13
14
156
7
8
1
2
3
4
16 9
5 10
11
12
1 [PROJECTOR TYPE]
Displays the type of the projector.
2
 
[MAIN VERSION]
Displays the firmware version of the projector

.
3
 
[POWER]
Displays the status of the power

.
4
 
[SHUTTER]
Displays the status of shutter function (ON: enabled (closed), 
OFF: disabled (open)).
5

 
[LAMP
  SELECT]
Displays the setting status of [LAMP SELECT] (x
  page   112).
6
 
[SERIAL
  NUMBER]
Displays the serial number of the projector.
7
 
[REMOTE2 ST
 ATUS]
Displays the control status of the  terminal.
8
 
[OSD]
Displays the status of the on-screen display

.9
 [LAMP  POWER]
Displays the setting status of [LAMP POWER] (x   page   113).
10
 
[INPUT]
Displays the status of the selected input.
11
 [INT

AKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
12
 
[OPTICS MODULE TEMPERA
 TURE]
Displays the status of the internal temperature of the projector.
13
 
[EXHAUST AIR 
 TEMPERATURE]
Displays the status of the exhaust air temperature of the 
projector.
14
 
[LAMP1], [LAMP2], [RUNTIME]
Displays the lighting status and runtime of the lamp.
15

 
[SELF TEST]
Displays the self-test information.
16

 
[PROJECT
 OR RUNTIME]
Displays the runtime of the projector.   
						

							Chapter 4 Settings — [NETWORK] menu
ENGLISH - 147
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-test display of the [Projector status] screen, 
click it to display the error/warning details.
 f The projector may go into the standby status to protect the projector de\
pending on the contents of the error

.
1
1 Self-test result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[F
AILED]:
Indicates that there is a problem.
[WARNING]:
Indicates that there is a warning.
 r [FAILED] items
Item Description
[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your dealer.
[FAN] There is a problem with the fan or the fan drive circuit. Consult your d\
ealer.
[INTAKE AIR TEMPERATURE] The intake air temperature is high. The projector may be used in an environment where 
the temperature is high, such as near a heating appliance.
[OPTICS MODULE TEMPERATURE] The temperature around the optics module inside the projector is high. The projector 
may be used in an environment where the temperature is high, such as nea\
r a heating 
appliance.
[EXHAUST AIR TEMPERATURE] The exhaust air temperature is high. The air exhaust port may be blocked.
[LAMP1 REMAIN TIME] The runtime of the lamp has exceeded the specified time, and it is time to replace the 
lamp.
[LAMP2 REMAIN TIME]
[LAMP1 STATUS] The lamp has failed to turn on. Wait a while until the luminous lamp cools off, and then 
turn on the power.
[LAMP2 STATUS]
[APERTURE(CONTRAST-SHUTTER)] There is a problem with the contrast shutter circuitry. Consult your dealer.
[SHUTTER(MUTE-SHUTTER)] There is a problem with the shutter circuitry. Consult your dealer.
[INTAKE AIR TEMP.SENSOR] There is a problem with the sensor used to detect intake air temperature\
. Consult your 
dealer.
[OPTICS MODULE TEMP.SENSOR] There is a problem with the sensor used to detect temperature inside the\
 projector. 
Consult your dealer.
[EXHAUST AIR TEMP.SENSOR] There is a problem with the sensor used to detect exhaust air temperature. Consult your 
dealer.
[COLOR WHEEL] There is a problem with the color wheel or the color wheel drive circuit\
. Consult your 
dealer.
[LENS MOUNTER] There is a problem in the lens mounter. Consult your dealer.
[COVER OPEN] Installation of the lamp unit cover is incomplete. Check the installatio\
n of the lamp unit 
cover. (x
  page   167)
[BRIGHTNESS SENSOR] There is a problem with the brightness sensor. If problems persist even after switching 
on the power, consult your dealer.   
						

							Chapter 4 Settings — [NETWORK] menu
148 - ENGLISH
 r[WARNING] items
Item Description
[AC POWER] AC input voltage is weak. Use electric wiring that can sufficiently withstand the power 
consumption of the projector.
[LOW-TEMPERATURE] The temperature around the optics module inside the projector is low. Projection cannot 
be started until the optics module becomes warm.
[HORIZONTAL TILT] The projector is used tilted at an angle that exceeds 15° from the horizontal plane.
[LIGHT OUTPUT LIMIT] The projector may be used in an environment where the temperature is hig\
h. The light 
output is reduced by approx. 20
  % to protect the projector.
[INTAKE AIR TEMPERATURE] The intake air temperature is high. The projector may be used in an environment where 
the temperature is high, such as near a heating appliance.
[OPTICS MODULE TEMPERATURE] The temperature around the optics module inside the projector is high. The projector 
may be used in an environment where the temperature is high, such as nea\
r a heating 
appliance.
[EXHAUST AIR TEMPERATURE] The exhaust air temperature is high. The air exhaust port may be blocked.
[LAMP1 REMAIN TIME] The runtime of the lamp has exceeded the specified time, and it is time to replace the 
lamp.
[LAMP2 REMAIN TIME]
[BATTERY] Battery replacement is required. Consult your dealer.
[AIR FILTER CASE] The air filter case is not attached. Check the attachment of the air filter unit. 
(x
  page   165)
[AIR FILTER] There is too much dust accumulated in the air filter. Turn the  switch 
 (x
  page   61), and clean the air filter. (x   page   165)
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.   
						

							Chapter 4 Settings — [NETWORK] menu
ENGLISH - 149
[Access error log] page
Click [Status] → [Access error log].
The error log on the web server is displayed such as access to the pages that do not exist or access with 
unauthorized user names or passwords.
[Mail error log] page
Click [Status] → [Mail error log].
Display E-mail error information if periodic E-mail sending has failed.
Note
 f[Access error log] and [Mail error log] display the recent few thousand accesses/requests.  All information may not be displayed when many 
accesses/requests are made at one time.
 f When [Access error log] and [Mail error log] exceed certain amount, information is erased from the oldest.
 fCheck [Access error log] and [Mail error log] periodically

.   
						

							Chapter 4 Settings — [NETWORK] menu
150 - ENGLISH
[Basic control] page
Click [Projector control] → [Basic control].
6
1
2
3
4
5
1 [POWER]
T
urns on/off the power.
2
 
[SHUTTER]
Switches whether to use the shutter function (enabled (shutter: 
closed)/disabled (shutter: open)).
3

 
[OSD]
Switches on (display)/of

f (hide) the on-screen display function.
4
 
[SYSTEM]
Switches the system method. 5

 On-screen display of the projector
Displays the same items as shown on the on-screen display 
of the projector
. You can check or change the settings of the 
menus. It is displayed even if the on-screen display function is 
set to off (hide).
6
 
[INPUT SELECT]
Switches the input signal.
(SDI input is supported only for PT
-

DZ780.)
[Detail control] page
Click [Projector control] → [Detail control].
5 4 3 2 1
9 8
7
6
1 Control of the projector
The projector is controlled by clicking the buttons in the same 
way as the buttons on the remote control. After control, the on-
screen display of the projector at the right of the control page is 
updated.
2
 
[SUB MEMOR
 Y]
Switches the sub memory.
3
 
[SYSTEM DA
 YLIGHT VIEW]
Switches to system daylight view settings.
4
 
[FREEZE]
Freezes the image temporarily

. 5
 [P  IN P]
Switches the P IN P setting.
6
 
[W
 AVEFORM MONITOR]
Displays the waveform of the input signal.
7
 
[LENS]
Adjusts the projection lens.
8

 
[TEST P
 ATTERN]
Displays the test pattern.
9
 
[GET OSD]
Updates the on-screen display of the projector at the right of the 
control page.