Home
>
Panasonic
>
Projector
>
Panasonic DLP Projector PT-DW640U PT-DW640UL PT-DX610U PT-DX610UL Operating Instructions
Panasonic DLP Projector PT-DW640U PT-DW640UL PT-DX610U PT-DX610UL Operating Instructions
Here you can view all the pages of manual Panasonic DLP Projector PT-DW640U PT-DW640UL PT-DX610U PT-DX610UL Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
ENGLISH - 81
Chapter 4 Settings — [PROJECTOR SETUP] menu
6) Press qw to switch [GROUP].
r
f The setting will change among [A] to [Z] each time you press
the button.
7) Press as to select [RESPONSE(ID GROUP)].
8) Press qw to switch [RESPONSE(ID GROUP)].
r
f The setting will change between [ON] and [OFF] each time you
press the button.
r
r [RESPONSE(ID ALL)]
[ON]
Returns the response when the ID setting is ALL.
[OFF] Does not return the response when the ID setting is ALL.
r
r [GROUP]
[A] - [Z] Controls...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-80.png "Page 81
ENGLISH - 81
Chapter 4 Settings — [PROJECTOR SETUP] menu
6) Press qw to switch [GROUP].
r
f The setting will change among [A] to [Z] each time you press
the button.
7) Press as to select [RESPONSE(ID GROUP)].
8) Press qw to switch [RESPONSE(ID GROUP)].
r
f The setting will change between [ON] and [OFF] each time you
press the button.
r
r [RESPONSE(ID ALL)]
[ON]
Returns the response when the ID setting is ALL.
[OFF] Does not return the response when the ID setting is ALL.
r
r [GROUP]
[A] - [Z] Controls...")
ENGLISH - 81 Chapter 4 Settings — [PROJECTOR SETUP] menu 6) Press qw to switch [GROUP]. r f The setting will change among [A] to [Z] each time you press the button. 7) Press as to select [RESPONSE(ID GROUP)]. 8) Press qw to switch [RESPONSE(ID GROUP)]. r f The setting will change between [ON] and [OFF] each time you press the button. r r [RESPONSE(ID ALL)] [ON] Returns the response when the ID setting is ALL. [OFF] Does not return the response when the ID setting is ALL. r r [GROUP] [A] - [Z] Controls...
Page 82
![Page 82
82 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.
[MAIN VERSION] Displays the main version of the firmware of the projector.
[SUB VERSION] Displays the sub version of the firmware of the projector.
[NETWORK VERSION] Displays the network version of the projector.
[ON COUNT] [POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON] Displays the number...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-81.png "Page 82
82 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.
[MAIN VERSION] Displays the main version of the firmware of the projector.
[SUB VERSION] Displays the sub version of the firmware of the projector.
[NETWORK VERSION] Displays the network version of the projector.
[ON COUNT] [POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON] Displays the number...")
82 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu [LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1. [LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2. [MAIN VERSION] Displays the main version of the firmware of the projector. [SUB VERSION] Displays the sub version of the firmware of the projector. [NETWORK VERSION] Displays the network version of the projector. [ON COUNT] [POWER ON TIMES] Displays the number of times the power is turned on. [LAMP1 ON] Displays the number...
Page 83
![Page 83
ENGLISH - 83
Chapter 4 Settings — [PROJECTOR SETUP] menu
[SUB MEMORY] Switches the sub memory. (
x page 87)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (
x page 59)
[SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x page 57)
[FREEZE] Temporarily freezes video to be a still image. (
x page 73)
[SIDE BY SIDE]
*Switches to the two window display. ( x page 73)
[ASPECT] Switches the aspect setting. (
x page 60)
*
Only for PT-DW640U
[DATE AND TIME]
Set the time zone, date,...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-82.png "Page 83
ENGLISH - 83
Chapter 4 Settings — [PROJECTOR SETUP] menu
[SUB MEMORY] Switches the sub memory. (
x page 87)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (
x page 59)
[SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. (
x page 57)
[FREEZE] Temporarily freezes video to be a still image. (
x page 73)
[SIDE BY SIDE]
*Switches to the two window display. ( x page 73)
[ASPECT] Switches the aspect setting. (
x page 60)
*
Only for PT-DW640U
[DATE AND TIME]
Set the time zone, date,...")
ENGLISH - 83 Chapter 4 Settings — [PROJECTOR SETUP] menu [SUB MEMORY] Switches the sub memory. ( x page 87) [SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. ( x page 59) [SYSTEM DAYLIGHT VIEW] Switches the [SYSTEM DAYLIGHT VIEW] setting. ( x page 57) [FREEZE] Temporarily freezes video to be a still image. ( x page 73) [SIDE BY SIDE] *Switches to the two window display. ( x page 73) [ASPECT] Switches the aspect setting. ( x page 60) * Only for PT-DW640U [DATE AND TIME] Set the time zone, date,...
Page 84
![Page 84
84 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Note
r
f The image setting registered in [USER LOGO] is not saved.
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory\
of the projector.
1) Press as to select [LOAD ALL USER DATA].
2) Press the button.
r
f The
[SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the
button.
4) When the confirmation is displayed, select [OK]
or [CANCEL], and press the button.
Note
r
f The...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-83.png "Page 84
84 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Note
r
f The image setting registered in [USER LOGO] is not saved.
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory\
of the projector.
1) Press as to select [LOAD ALL USER DATA].
2) Press the button.
r
f The
[SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the
button.
4) When the confirmation is displayed, select [OK]
or [CANCEL], and press the button.
Note
r
f The...")
84 - ENGLISH Chapter 4 Settings — [PROJECTOR SETUP] menu Note r f The image setting registered in [USER LOGO] is not saved. [LOAD ALL USER DATA] Load the various setting values saved as a backup in the built-in memory\ of the projector. 1) Press as to select [LOAD ALL USER DATA]. 2) Press the button. r f The [SECURITY PASSWORD] screen is displayed. 3) Enter a security password and press the button. 4) When the confirmation is displayed, select [OK] or [CANCEL], and press the button. Note r f The...
Page 85
![Page 85
ENGLISH - 85
Chapter 4 Settings — [TEST PATTERN] menu
[TEST PATTERN] menu
Select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f Press
qw to switch.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various
adjustments.
1) Press qw to switch [TEST PATTERN].
r
f The...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-84.png "Page 85
ENGLISH - 85
Chapter 4 Settings — [TEST PATTERN] menu
[TEST PATTERN] menu
Select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f Press
qw to switch.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various
adjustments.
1) Press qw to switch [TEST PATTERN].
r
f The...")
ENGLISH - 85 Chapter 4 Settings — [TEST PATTERN] menu [TEST PATTERN] menu Select [TEST PATTERN] from the main menu. Refer to “Navigating through the menu” ( x page 51) for the operation of the menu screen. r f Press qw to switch. [TEST PATTERN] Displays the test pattern built-in to the projector. Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various adjustments. 1) Press qw to switch [TEST PATTERN]. r f The...
Page 86
![Page 86
86 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
[SIGNAL LIST] menu
Select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
r Registered signal status
r
f A name can be set for each sub memory (
x page 87).
r
f Memory number:
$
:KHQWKHDGGUHVVQXPEHU $
$+
+ LVUHJLVWHUH G
6XEPHPRU\QXPEH
U
Registering a signal to the list
After a new signal is input and the button on the remote control or the...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-85.png "Page 86
86 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
[SIGNAL LIST] menu
Select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
r Registered signal status
r
f A name can be set for each sub memory (
x page 87).
r
f Memory number:
$
:KHQWKHDGGUHVVQXPEHU $
$+
+ LVUHJLVWHUH G
6XEPHPRU\QXPEH
U
Registering a signal to the list
After a new signal is input and the button on the remote control or the...")
86 - ENGLISH Chapter 4 Settings — [SIGNAL LIST] menu [SIGNAL LIST] menu Select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” ( x page 51) for the operation of the menu screen. r r Registered signal status r f A name can be set for each sub memory ( x page 87). r f Memory number: $ :KHQWKHDGGUHVVQXPEHU $ $+ + LVUHJLVWHUH G 6XEPHPRU\QXPEH U Registering a signal to the list After a new signal is input and the button on the remote control or the...
Page 87
![Page 87
ENGLISH - 87
Chapter 4 Settings — [SIGNAL LIST] menu
Note
r
f A signal can also be deleted from [ENTRY SIGNAL DELETE] on the
[REGISTERED SIGNAL SETUP] screen.
Protecting the registered data
Registered signals can be protected.
1) Press asqw to select the signal to protect.
2) Press the button.
r
f The
[REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the button.
r
f The
[REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK].
5) Press qw to switch [LOCK].
r
f The setting...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-86.png "Page 87
ENGLISH - 87
Chapter 4 Settings — [SIGNAL LIST] menu
Note
r
f A signal can also be deleted from [ENTRY SIGNAL DELETE] on the
[REGISTERED SIGNAL SETUP] screen.
Protecting the registered data
Registered signals can be protected.
1) Press asqw to select the signal to protect.
2) Press the button.
r
f The
[REGISTERED SIGNAL STATUS] screen is displayed.
3) Press the button.
r
f The
[REGISTERED SIGNAL SETUP] screen is displayed.
4) Press as to select [LOCK].
5) Press qw to switch [LOCK].
r
f The setting...")
ENGLISH - 87 Chapter 4 Settings — [SIGNAL LIST] menu Note r f A signal can also be deleted from [ENTRY SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen. Protecting the registered data Registered signals can be protected. 1) Press asqw to select the signal to protect. 2) Press the button. r f The [REGISTERED SIGNAL STATUS] screen is displayed. 3) Press the button. r f The [REGISTERED SIGNAL SETUP] screen is displayed. 4) Press as to select [LOCK]. 5) Press qw to switch [LOCK]. r f The setting...
Page 88
![Page 88
88 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
To register the current settings to the list
1) Press qw on the normal screen (when the
menu is not displayed).
r
f The sub memory registration screen is displayed if the sub
memory is not registered. Proceed to Step
3).
r
f A list of sub memories registered to the signal currently input is
displayed.
r
f When [SUB MEMORY] is selected with [PROJECTOR SETUP]
→ [FUNCTION BUTTON] on the menu, the
button can be used instead of qw.
2) Press asqw...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-87.png "Page 88
88 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
To register the current settings to the list
1) Press qw on the normal screen (when the
menu is not displayed).
r
f The sub memory registration screen is displayed if the sub
memory is not registered. Proceed to Step
3).
r
f A list of sub memories registered to the signal currently input is
displayed.
r
f When [SUB MEMORY] is selected with [PROJECTOR SETUP]
→ [FUNCTION BUTTON] on the menu, the
button can be used instead of qw.
2) Press asqw...")
88 - ENGLISH Chapter 4 Settings — [SIGNAL LIST] menu To register the current settings to the list 1) Press qw on the normal screen (when the menu is not displayed). r f The sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step 3). r f A list of sub memories registered to the signal currently input is displayed. r f When [SUB MEMORY] is selected with [PROJECTOR SETUP] → [FUNCTION BUTTON] on the menu, the button can be used instead of qw. 2) Press asqw...
Page 89
![Page 89
ENGLISH - 89
Chapter 4 Settings — [SECURITY] menu
[SECURITY] menu
Select [SECURITY] from the main menu, and select the item from the sub-m\
enu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f When the projector is used for the first time
Initial password: Press
awsqawsq in order, and press the button.
r
f After selecting the item, press
asqw to set.
Attention
r
f When you select the [SECURITY] from the main menu and press the button, entering a password...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-88.png "Page 89
ENGLISH - 89
Chapter 4 Settings — [SECURITY] menu
[SECURITY] menu
Select [SECURITY] from the main menu, and select the item from the sub-m\
enu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f When the projector is used for the first time
Initial password: Press
awsqawsq in order, and press the button.
r
f After selecting the item, press
asqw to set.
Attention
r
f When you select the [SECURITY] from the main menu and press the button, entering a password...")
ENGLISH - 89 Chapter 4 Settings — [SECURITY] menu [SECURITY] menu Select [SECURITY] from the main menu, and select the item from the sub-m\ enu. Refer to “Navigating through the menu” ( x page 51) for the operation of the menu screen. r f When the projector is used for the first time Initial password: Press awsqawsq in order, and press the button. r f After selecting the item, press asqw to set. Attention r f When you select the [SECURITY] from the main menu and press the button, entering a password...
Page 90
![Page 90
90 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
1) Press as to select [DISPLAY SETTING].2) Press qw to switch [DISPLAY SETTING].
r
f The setting will change among [OFF], [TEXT], and[USER
LOGO] each time you press the button.
r
r [DISPLAY SETTING]
[OFF]
The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] The picture registered by the user is projected.
Note
r
f To create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.
[TEXT...](http://img.usermanuals.tech/thumb/58/75768/w300_pt-dx610_en_om_d-89.png "Page 90
90 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
1) Press as to select [DISPLAY SETTING].2) Press qw to switch [DISPLAY SETTING].
r
f The setting will change among [OFF], [TEXT], and[USER
LOGO] each time you press the button.
r
r [DISPLAY SETTING]
[OFF]
The text display is disabled.
[TEXT] The text display is enabled.
[USER LOGO] The picture registered by the user is projected.
Note
r
f To create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.
[TEXT...")
90 - ENGLISH Chapter 4 Settings — [SECURITY] menu 1) Press as to select [DISPLAY SETTING].2) Press qw to switch [DISPLAY SETTING]. r f The setting will change among [OFF], [TEXT], and[USER LOGO] each time you press the button. r r [DISPLAY SETTING] [OFF] The text display is disabled. [TEXT] The text display is enabled. [USER LOGO] The picture registered by the user is projected. Note r f To create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required. [TEXT...