Panasonic DLP Projector PT-DW640U PT-DW640UL PT-DX610U PT-DX610UL Operating Instructions

ENGLISH - 91
Chapter 4 Settings — [SECURITY] menu
3) Press as to select [CONTROL PANEL] or 
[REMOTE CONTROL].
4) Press the  button.
r
f The 
[CONTROL PANEL]  screen or the [REMOTE CONTROL]  
screen is displayed.
5) Press as to select an item, and press the 
 button.
6) When the confirmation is displayed, select [OK] 
or [CANCEL], and press the  button.
r
r [CONTROL PANEL] and [REMOTE CONTROL]
r
f You can set the limitation on the control from the control panel and 
remote control.
[ENABLE]
Enables all...

92 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[NETWORK] menu
Select [NETWORK] from the main menu, and select the item from the sub-me\
nu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f After selecting the item, press 
asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1) Press as to select [NETWORK SETUP].
2) Press the  button.
r
f The 
[NETWORK SETUP]  screen is displayed.
3) Press as to select an...

ENGLISH - 93
Chapter 4 Settings — [NETWORK] menu
r
r [NETWORK CONTROL]
[WEB CONTROL]
Set to [ON] to control with the Web browser.
[PJLink CONTROL] Set to [ON] to control with the PJLink protocol.
[COMMAND CONTROL] Set to [ON] to control with the / terminal control command format 
(
x  page 123).
Refer to “Control commands via LAN” ( x page 119).
[COMMAND PORT] Set the port number used for command control.
[CRESTRON RoomView] Set to [ON] to control with RoomView of Crestron.
[AMX D.D.] Set to [ON] to...

94 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Name and function of network function parts
12 3
1 LAN10/100 lamp (yellow)
Lights on when connected to the 100BASE-TX.
2   terminal ( 10BASE-T/100BASE-TX )
Used to connect the LAN cable here. 3 
LAN LINK/ACT lamp (green)
Lights on when connected.
Flashes when transmitting/receiving data.
Accessing from the Web browser
1) Start up the Web browser on the computer.
2) Enter the IP address set on the projector into 
the URL entry field of the Web browser.
3)...

ENGLISH - 95
Chapter 4 Settings — [NETWORK] menu
Descriptions of items
(1)
(2)
(3)
(4)
(5)
(6)
1  Page tab
Switches pages by clicking it.
2  [Status]
The status of the projector is displayed by clicking this item.
3  [Projector control]
The [Projector control] page is displayed by clicking this item. 4 
[Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5  [Change password]
The [Change password] page is displayed by clicking this item.
6  [CRESTRON RoomView]
The control page...

96 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Error information page
When [Error (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error details.
r
f The projector may go into the standby status to protect the projector de\
pending on the contents of the error.
>2.@RSHUDWLQJSURSHUO\
>)
$,/(@DSUREOHPRFFXUUH G
>: $51,1*@ZDUQLQJ
r
r Problem occurrence [FAILED]
Parameter
Description
[MAIN CPU BUS] There is a problem with the...

ENGLISH - 97
Chapter 4 Settings — [NETWORK] menu
[Network status] page
Click [Status]
 → [Network status].
The current network setting status is displayed.
[Access error log] page
Click [Status]  → [Access error log].
The error log on the WEB server is displayed such as access to the pages that do not exist or access with unauthorized user names or 
passwords.
[Access log] page
Click [Status]  → [Access log].
The log such as user name accessed to the WEB control page, accessed IP  address, and accessed...

98 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[Basic control] page
Click [Projector control]
 → [Basic control].
(1)
(2)
(4)
(6) (3)
(5)
1 
[POWER]
Switches the power on/off.
2  [SHUTTER]
Switches between use or not use of the shutter function.
3  [OSD]
Switches between on (display)/off (no display) of the on-screen 
display function. 4 
[SYSTEM]
Switches the system method.
5  On-screen display of the projector
Displays the same content as the on-screen display of the 
projector. The settings of the...

ENGLISH - 99
Chapter 4 Settings — [NETWORK] menu
r
f The following setting change screen is displayed by pressing the [Change] button.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1 
[PROJECTOR NAME]
Enter the name of the projector. Also enter the host name if it is 
required when using a DHCP server, etc.
2  [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
3  [IP ADDRESS]
Enter the IP address when not using a DHCP server.
4  [SUBNET MASK]
Enter the subnet mask when not using a DHCP server....

100 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Note
r
f The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Please 
consult your dealer.
[Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up]
 → [Ping test].
(1)
(2)
(3)
(4)
1  [Input IP address]
Enter the IP address of the server to be tested.
2  [Submit]
Executes the connection test. 3...