Home > Panasonic > Recording Equipment > Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions

Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 182
    Add page 51 to Favourites
    image text
    Enable zoom 
    							51
 Cancel the Alarm Action
When an alarm has occurred, this unit will start the alarm
action according to the selected alarm action mode.
To cancel the alarm action, press the ALARM RESET but-
ton.
When ON is selected for Alarm Auto Reset (on the Alarm
Setup menu of Event), the following will be performed
automatically even if the alarm action is not canceled by
pressing the ALARM RESET button on the front panel.
• The ALARM indicator will stop blinking and light steadi-
ly
• The displayed alarm information will disappear
• The buzzer will stop beeping
zPress the ALARM RESET button to cancel the
alarm actions.
The ALARM indicator will go off.
Note:When the alarm is canceled, the event action will
stop.
 Suspend the Alarm Actions
It is possible to suspend (deactivate temporarily) the alarm
actions even when an event has occurred.
This function will be useful when it is necessary not to acti-
vate the alarm actions for a certain period, such as when
configuring the system. However, images and event logs
will be recorded even when alarm actions are suspended.
 To suspend (deactivate temporarily)
the alarm actions
z
Press both the ALARM RESET button and the
SET button at the same time.
The ALARM SUSPEND indicator will light.
 To stop suspending the alarm
actions
x
Press both the ALARM RESET button and the
SET button at the same time again.
The ALARM SUSPEND indicator will go off.
Note:When an external switch is connected to the
ALARM/CONTROL connector on the rear panel, it is
possible to suspend the alarm actions using the exter-
nal switch.
In this case, the alarm actions will be suspended when
the external switch is on.
To stop suspending the alarm actions, set the external
switch to off.
MTIMER
HDD 2 ERROR
HDD 1
D
ELOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–ALARM
RESET
PAN/
TILT
zxzx
ALARMTIMER
HDD 2
ERROR
HDD 1 ALARM
SUSPEND
ALARM
RESETOPERATE
MONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSDPAN/
TILT
STOPPLAY
ZOOM/
FOCUSTEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEA
BUSY
PAN/TILTSLOW
z
    Add page 52 to Favourites
    image text
    Enable zoom 
    							52
It is possible to copy (duplicate) manually the images
recorded on the disk area selected with the DISK SELECT
window (page 25) to the HDD copy area or the external
recording device (DVD-RAM disk, DVD-R disk, CD-R disk)
connected to the unit.
It is recommended to make back-up copies on a regular
basis for unexpected situations such as malfunction of the
hard disk.
Manual copy is available during the following.
• While displaying live images
• While pausing playback of recorded images
• When displaying a search window (Recording event list
window, VMD search list window, Marking list window)
(Manual copy is not available when a thumbnail window
is displayed.)
Notes:
• The auto copy function is available for copying record-
ed images to the DVD-RAM disk automatically. When
the auto copy function is enabled, manual copy is not
available. Refer to a system administrator for further
information about the auto copy function.
• To copy during playback of recorded images, pause
the playback temporarily.
• To copy recorded images on the DVD-RAM disk, for-
matting (initializing) the DVD-RAM disk is required in
advance. Refer to page 56 for the descriptions of how
to format DVD-RAM disks.
• Copy time may differ depending on the size of the
recorded image. It may take longer to copy images
recorded in higher quality and resolution even when
selecting the same number of cameras and designating
the same recording duration.
• When the clock of the unit has been changed by editing
the time and date settings or by the auto time adjust-
ment function, overlapping of the time ranges of the
images recorded before and after the time adjustment
could occur. In this case, copying may not function
properly.
zPress the SHIFT button.
The SHIFT indicator will light.
To copy recorded images during playback, pause the play-
back temporarily.
xPress the COPY button.
The DATA COPY window will be displayed on monitor 2
and the VGA monitor.
The DATA COPY window will not be displayed when a
thumbnail window is displayed.
In this case, display a list window using the arrows button
(CD).
Notes:
• When the auto copy function is enabled, the DATA
COPY window will not be displayed.
• The copy cancel window will be displayed if the user
who started manual copy presses the COPY button dur-
ing the manual copy. (It is impossible to stop manual
copy performed by other users.)
COPYING (Duplicate)
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2R
MONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
zx
zx
12345678
910111213141516
DATA COPY
CAMERA
PERIOD
COPY DRIVE
Alter Detect HDD COPY AREACOPY1 COPY2
OKCANCEL OFF
AUG
..20 04 3      :     00      PM
AUG
..20 04 3      :     30      PM
    Add page 53 to Favourites
    image text
    Enable zoom 
    							53
cPerform the settings for data copy (camera
channel, time range, the disk on which images
are to be copied). Move the cursor to each set-
ting item using the arrows button and select a
parameter by rotating the jog dial. (It is possi-
ble to change only the CAMERA parameter set-
tings by pressing the SET button.)
Notes:
• Time range to be set for PERIOD should be 99 min-
utes and 59 seconds or less to copy images for one
attempt. (Copying will stop automatically when the size
of the copied data reaches 4 GB even before the end
time of the set time range.)
• When COPY 1 or COPY 2 is selected for COPY
DRIVE, it is possible to detect alteration using the view-
er software by checking the ALTER DETECT check-
box.
vSelect the OK button using the arrows button
and press the SET button.
The DATA COPY window will be closed and data copy will
start.
The copy icon will be displayed on the task bar during
copying.
To close the DATA COPY window, select CANCEL using
the arrows button and press the SET button. The setting will
be canceled and the DATA COPY window will be closed.
In the following cases, copying will not start even when you
move the cursor to OK and press the SET button:
• When another user has selected the desired copy drive
• When copying is being performed manually
Important:
• To eject the disk, do the following operation (copy com-
pletion) while live images are displayed before pressing
the eject button of the external recording device.
Copy icon
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
cvcvv
PAN/
TILT

Confirm the SHIFT indicator is lit. Then, press the COPY
button and [1] simultaneously for 2 seconds or more.

Confirm the SHIFT indicator is lit. Then, press the COPY
button and [2] simultaneously for 2 seconds or more.
• Copying will be performed in the following order:
Viewer Software →Images →Audio
Depending on the set time range for PERIOD, some of
images and audio may not be copied.
• Use the viewer software to play the copied images.
Refer to the Network Operating Instructions (PDF) for
descriptions of how to play the copied images.
    Add page 54 to Favourites
    image text
    Enable zoom 
    							54
Perform the settings for the built-in hard disk of the unit, the
optional extension unit and the DVD-RAM disk. These are
the descriptions of how to delete recorded images on the
hard disk and how to format a DVD-RAM disk.
Refer to a system administrator for further information about
the other disks.
 Deletion of recorded images
saved on the hard disk manually
Delete recorded images saved in the normal area or the
event area of the built-in hard disk or the optional extension
unit manually.
By setting a time and date, images in the normal record
area of the hard disk recorded before the set time and date
will be deleted.
Manually delete unwanted images on the hard disk.
Important:
• It is impossible to recover the deleted images.
• When STOP is selected for Disk End Mode, the avail-
able disk space will not be increased even though dele-
tion is performed.
Note:It is possible to delete recorded images automatically
when the set days have passed from the day the image
was recorded (Auto Delete). Refer to a system adminis-
trator for further information.
zPress the SETUP/ESC button for 2 seconds or
more.
The SETUP MENU (Quick) will be displayed on monitor 2
and the VGA monitor.
When ADVANCED is selected for REC Type of REC &
Event on the SETUP MENU (Quick) (page 97), the top
page of the SETUP MENU (Advanced) will be displayed. In
this case, go to step 3.
xMove the cursor to Advanced Menu using
the arrows button (CD) and press the SET
button.
The SETUP MENU (Advanced) will be displayed.
cMove the cursor to Maintenance using the
arrows button (CDAB) and press the SET
button.
vMove the cursor to Data Delete using the
arrows button (CD).
The Data Delete menu will be displayed.
DELETE DATA ON THE DISK
R
2 R
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
z
xcxcv
PAN/
TILT
EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording
REC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Quick Menu Auto Delete Manual Delete for Normal Recording Area
                      Delete before   JAN  .      1    .   04
 
 Manual Delete for Event Recording Area
                      Delete before   JAN  .      1    .   04 
 Disc Format of DVDCOPY1 (Rear)
COPY2 (Front)
DELETE
FORMAT
FORMAT
OFF
DELETE
Advanced
ScheduleCommSwitcherSETUP MENULIVERecording Event
DisplaySystemMaintenance ADMIN Password PSD User Auto Login
 Auto Login User
 Auto Logout Priority GO TO LAST before Language Beep(Operation) Buzzer(Error) Shutdown Time Auto Copy
*****
OFFON ADMIN
ADMIN
Follow the priority. 
5s
ENGLISH
ON
2s
10s
OFF
AdvancedBasic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level 
Save/Load
Quick Menu
SETUP MENULIVEQuickDisplay
REC & Event
Network
Advanced Menu
::
 Date Format Time  Format Time & Date
 Time & Date Display Position Camera Title Camera Title Display Position Live Sequence Summer Time (Day Light Savings) Beep (Operation) LanguageMMM.DD.YY
12h
PM
      SET
L-UPPER
    SETUP
R-LOWER
    SETUP
AUTO
ON
ENGLISH
JAN  .04 10 00 00 1    .
SETUP MENUAdvancedRecording Event ScheduleSystem
Display Comm SwitcherLIVEMaintenanceREC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Date Delete
Event Log
Error Log
Access Log
Quick Menu
SUPER FINE
FINE
NORMAL
EXTENDED
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips CAM 1
CAM 2
CAM 3
CAM 4
CAM 5
CAM 6
CAM 7
CAM 8
CAM 9
CAM 10
CAM 11
CAM 12
CAM 13
CAM 14
CAM 15
CAM 16MANU SCHEPOST EVTEMRPRE EVT
    Add page 55 to Favourites
    image text
    Enable zoom 
    							55
bPress the SET button.
The cursor will be displayed on the Data Delete menu.
nMove the cursor to Manual Delete for Normal
Recording Area or Manual Delete for Event
Recording Area using the arrows button, and
set time and date using the jog dial.
The images recorded until the day before the set time and
date will be subject to be deleted.
mMove the cursor to DELETE using the arrows
button and press the SET button.
The confirmation dialog window will be displayed.
,Select OK using the arrows button and press
the SET button.
To cancel delete, select CANCEL. 
.Press the SETUP/ESC button for 2 seconds or
more.
The SETUP MENU (Advanced) will be closed and the live
images will be displayed.
EventScheduleDisplayCommSwitcherSETUP MENULIVERecordingSystemMaintenanceREC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Quick Menu Auto Delete Manual Delete for Normal Recording Area
                      Delete before   JAN  .      1    .   04
 
 Manual Delete for Event Recording Area
                      Delete before   JAN  .      1    .   04 
 Disc Format of DVDCOPY1 (Rear)
COPY2 (Front)
DELETE
FORMAT
FORMAT
OFF
DELETE
Advanced
EventScheduleDisplayCommSwitcherSETUP MENULIVERecordingSystemMaintenanceREC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Quick Menu Auto Delete Manual Delete for Normal Recording Area
                      Delete before   JAN  .      1    .   04
 
 Manual Delete for Event Recording Area
                      Delete before   JAN  .      1    .   04 
 Disc Format of DVDCOPY1 (Rear)
COPY2 (Front)
DELETE
FORMATFORMAT
OFF
DELETE
Advanced
OK CANCEL
Normal recording area is going 
to be erased.
Are you sure?
R
2 R
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
.
bm,nnm,
PAN/
TILT
EventScheduleDisplayCommSwitcherSETUP MENULIVERecordingSystemMaintenanceREC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Quick Menu Auto Delete Manual Delete for Normal Recording Area
                      Delete before   JAN  .      1    .   04
 
 Manual Delete for Event Recording Area
                      Delete before   JAN  .      1    .   04 
 Disc Format of DVDCOPY1 (Rear)
COPY2 (Front)
DELETE
FORMAT
FORMAT
OFF
DELETEAdvanced
FORMAT
FORMATDELETE
    Add page 56 to Favourites
    image text
    Enable zoom 
    							56
FORMAT (INITIALIZE) A DVD-RAM DISK
To copy (duplicate) recorded images onto the DVD-RAM
disk, formatting (initializing) the DVD-RAM disk is required
in advance.
To delete images recorded on the DVD-RAM disk, format-
ting (initializing) of the DVD-RAM disk is also required.
Important:
All data on the disk will be deleted if formatted (initial-
ized). It is impossible to recover the deleted images.
zPress the SETUP/ESC button for 2 seconds or
more.
The SETUP MENU (Quick) will be displayed on monitor 2
and the VGA monitor.
When ADVANCED is selected for REC Type of REC &
Event on the SETUP MENU (Quick) (page 97), the top
page of the SETUP MENU (Advanced) will be displayed. In
this case, go to step 3.
xMove the cursor to Advanced Menu using
the arrows button (CD) and press the SET
button.
The SETUP MENU (Advanced) will be displayed.
cSelect Maintenance using the arrows button
and press the SET button. 
vSelect Data Delete using the arrows button
(CD).
bPress the SET button.
The cursor will be displayed on the Data Delete menu.
nSelect either COPY1 or COPY2 (port to
which the DVD-RAM is connected) for Disc
Format of DVD using the arrows button.
R
2 R
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
PAN/
TILT
z
xcb xcvn
EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording
REC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Quick Menu Auto Delete Manual Delete for Normal Recording Area
                      Delete before   JAN  .      1    .   04
 
 Manual Delete for Event Recording Area
                      Delete before   JAN  .      1    .   04 
 Disc Format of DVDCOPY1 (Rear)
COPY2 (Front)
DELETE
FORMAT
FORMAT
OFF
DELETE
Advanced
EventScheduleDisplayCommSwitcherSETUP MENULIVERecordingSystemMaintenanceREC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Quick Menu Auto Delete Manual Delete for Normal Recording Area
                      Delete before   JAN  .      1    .   04
 
 Manual Delete for Event Recording Area
                      Delete before   JAN  .      1    .   04 
 Disc Format of DVDCOPY1 (Rear)
COPY2 (Front)
DELETE
FORMAT
FORMAT
OFF
DELETEAdvanced
FORMAT
FORMATDELETE
EventScheduleDisplayCommSwitcherSETUP MENULIVERecordingSystemMaintenanceREC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Quick Menu Auto Delete Manual Delete for Normal Recording Area
                      Delete before   JAN  .      1    .   04
 
 Manual Delete for Event Recording Area
                      Delete before   JAN  .      1    .   04 
 Disc Format of DVDCOPY1 (Rear)
COPY2 (Front)
DELETE
FORMATFORMAT
OFF
DELETE
Advanced
ScheduleCommSwitcherSETUP MENULIVERecording Event
DisplaySystemMaintenance ADMIN Password PSD User Auto Login
 Auto Login User
 Auto Logout Priority GO TO LAST before Language Beep(Operation) Buzzer(Error) Shutdown Time Auto Copy
*****
OFFON ADMIN
ADMIN
Follow the priority. 
5s
ENGLISH
ON
2s
10s
OFF
AdvancedBasic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level 
Save/Load
Quick Menu
SETUP MENULIVEQuickDisplay
REC & Event
Network
Advanced Menu
::
 Date Format Time  Format Time & Date
 Time & Date Display Position Camera Title Camera Title Display Position Live Sequence Summer Time (Day Light Savings) Beep (Operation) LanguageMMM.DD.YY
12h
PM
      SET
L-UPPER
    SETUP
R-LOWER
    SETUP
AUTO
ON
ENGLISH
JAN  .04 10 00 00 1    .
SETUP MENUAdvancedRecording Event ScheduleSystem
Display Comm SwitcherLIVEMaintenanceREC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Date Delete
Event Log
Error Log
Access Log
Quick Menu
SUPER FINE
FINE
NORMAL
EXTENDED
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips
1ips CAM 1
CAM 2
CAM 3
CAM 4
CAM 5
CAM 6
CAM 7
CAM 8
CAM 9
CAM 10
CAM 11
CAM 12
CAM 13
CAM 14
CAM 15
CAM 16MANU SCHEPOST EVTEMRPRE EVT
    Add page 57 to Favourites
    image text
    Enable zoom 
    							57
mPress the SET button to select FORMAT. 
The confirmation dialog window will be displayed.
,Move the cursor to OK using the arrows but-
ton and press the SET button to start format-
ting.
To stop formatting, select CANCEL and press the SET but-
ton.
During formatting, the status window will be displayed.
The status window will be closed automatically after com-
pleting formatting.
.Press the SETUP/ESC button for 2 seconds or
more to close the SETUP MENU (Advanced).
Live images will be displayed on monitor 2 and the VGA
monitor.
OK CANCEL
All of data in the COPY1 is going 
to be erased.
Starting format?
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
PAN/
TILT
m,,.
    Add page 58 to Favourites
    image text
    Enable zoom 
    							58
DISPLAY/EDIT TEXT INFORMATION
It is possible to attach text information to images when
recording.
Entering 20 characters for a line (up to 10 lines, with a total
of 200 characters) is possible.
These are the descriptions of how to display/edit the
attached text information for images.
Note:Displaying/editing text information is possible during
the following.
• While pausing playback on a single screen
• While displaying the recording event list window
z Press the
PLAY/PAUSE button to stop playback.

Select a desired recording event by rotating
the jog dial.
xPress the SHIFT button.
The SHIFT indicator will light.
cPress the TEXT button to display the TEXT
INFORMATION window.
Text information attached to the paused playback image or
text information attached to the selected recording event
will be displayed.
To close the TEXT INFORMATION window, press the
SETUP/ESC button or the SET button.
vPress the TEXT button again to edit text infor-
mation.
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2 RMONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
zcv
xz
z
cv
xz
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01chMANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL CAM REC EVTABCDEFGHIJ
ABCDEFGHIJ
ABCDEFGHIJ
ABCDEFGHIJ
ABCDEFGHIJ
ABCDEFGHIJ
ABCDEFGHIJ
ABCDEFGHIJTEXT
AUG.20.04 3:04:23 PM
AUG.20.04 3:01:24 PM
AUG.20.04 3:00:40 PM
AUG.20.04 3:00:00 PM
AUG.20.04 2:59:11 PM
AUG.20.04 2:45:45 PM
AUG.20.04 2:44:09 PM
AUG.20.04 2:33:16 PM
TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARK
TIME&DATECAMERAREC EVENTTEXTUNLOCK FILTER
TOTAL AUG.20.04 3:22:10 AM  AUG.20.04 2:31:18 AM100
TEXT INFORMATION
EDIT : [TEXT]  SET : [SET]  CANCEL : [ESC]
TEXT INFORMATION
EXT : [TEXT]
    Add page 59 to Favourites
    image text
    Enable zoom 
    							59
bEdit text information using the arrows button
and the jog dial.
•To insert a character
Move the cursor to a desired point where a character is
to be inserted using the arrows button, and select a
character using the jog dial.
•To delete a character
Move the cursor to a character to be deleted using the
arrows button, and press the STOP button.
•To delete all characters
Press the STOP button for 2 seconds or more.
•Available characters
The following characters can be entered:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a
b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6
7 8 9 !  # $ % &  ( ) * + , - . / : ; < = > ? @ [  ] ^ _ ` { | }
~ SP
Press the TEXT button after editing text.
nPress the SET button to apply the edited char-
acters.
To cancel the edit, press the SETUP/ESC button. The edit-
ed characters will not be applied.Important:
It is impossible to edit text information using the system
controller.
TEXT INFORMATION
EDIT : [TEXT]  SET : [SET]  CANCEL : [ESC] Digital Disc Recorder WJ-HD316
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2R
MONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
b
b
nb
nb
    Add page 60 to Favourites
    image text
    Enable zoom 
    							60
Error Indication ERROR indicator on the
front panelBlinks Lights steadily Off
BuzzerSounds (when it has been
set)Stops Stops
Error display area on the
main barDisplays Displays Does not display
The error output (pin no.18)
of the ALARM/CONTROL
connector
Problem mail
Error log Filed – –Outputs
Transmitted (When it has
been set)Does not output
–Does not output
– At an error occurrence In the error half-reset 
conditionIn the error reset condition
W-ERROR
SMART
H-METER ALT-*
ERROR/WARNINGS
•The error status
When a fatal error (one that might cause the system to go down) has occurred, the ERROR indicator will blink red and the
error indication will be displayed on the monitor 2.
•The warning status
When an error (even though it has not caused the system trouble yet, but which may become a fatal error) has occurred,
the ERROR indicator will blink orange.
• When the buzzer sounding duration has passed from the error occurrence or the ALARM RESET button is pressed, the
error indication will disappear and the blinking ERROR indicator will light steadily. (Error half-reset)
If the error is eliminated, the ERROR indicator will go off when the ALARM RESET button is pressed while the ERROR indi-
cator is lit. (Error reset)
Status Description Solution
Error
Warning
WarningRecorded image has been altered.
Playback will be paused.
Failed to write data on the HDD.
The hard disk may be malfunctioning
and may not work correctly.
The set time for the HOUR METER has
passed. (Refer to page 135.)
It may be reaching the end of the hard
disk’s lifetime.Press the ALARM RESET button to can-
cel the error status. The unit will be in
the error half-reset/error reset condition.
Press the PLAY/PAUSE button to resume
playback.
Press the ALARM RESET button to can-
cel the error status. The unit will be in
the error half-reset/error reset condition.
When the W-ERROR indication is dis-
played frequently, contact the dealer to
replace the hard disk drive.
Press the ALARM RESET button to can-
cel the warning status. The unit will be in
the error half-reset/error reset condition.
Contact the dealer to replace the hard
disk.
Press the ALARM RESET button to can-
cel the warning status. The unit will be in
the error half-reset/error reset condition.
Contact the dealer to replace the hard
disk.
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions