Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions

							121
8VMD
Perform the settings of event action at a motion detection or
the settings of the auto copy function.
Perform the settings for the following operation mode. Refer
to page 49 for further information about each operation
mode.
ACT DET (Activity Detection Mode):Performs only
recording, writing an event log and camera movement
to a preset position at an event occurrence. Other event
actions will not be performed.
ALARM (Alarm Mode):Performs every event action
according to the settings.
OFF:Performs only recording of the event log. Other event
actions will not be performed.
Auto copy is the function to copy recorded images auto-
matically onto the copy area of the hard disk or the DVD-
RAM disk.
Select ON or OFF to enable or disable the auto copy func-
tion.
ON:Enable the auto copy function
OFF:Disable the auto copy function
Important:
•When OFF is selected for Auto Copy of Basic Setup
on System, the auto copy function will not work even
though ON is selected for this setting.
Select HDD, COPY 1 or COPY 2 for Auto Copy.
•Images recorded (by pre-event recording) in the pre-
recording area in the extension unit will not be copied
automatically.
8Video Loss
Perform the settings of an event action at a video loss or the
settings of the auto copy function.
The contents to be set are the same as the settings for
VMD above.
8Terminal/Command alarm
Perform the settings of an event action at a terminal/com-
mand alarm occurrence or the settings of the auto copy
function.
The contents to be set are the same as the settings for
VMD above. 
[Time Table] Assignment of REC Program
and Event Program after setting the time
zone
Create recording timetables for each day of the week, and
assign REC Program and Event Program to each timetable.
Up to 6 recording programs can be created.
Do the following to create timetables.
[Screenshot 1]
Start operation after displaying the timetable window.
zPress the SET button.
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick MenuSETUPSETUPSETUPSETUP
 Event Program 1 Event Program 2 Event Program 3 Event Program 4  Operation Mode  Auto Copy Video Loss
OK
ALARMOFF
CANCEL
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick MenuSETUPSETUPSETUPSETUP
 Event Program 1 Event Program 2 Event Program 3 Event Program 4  Operation Mode  Auto Copy Terminal/Command Alarm
OK
ALARMOFF
CANCEL
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick MenuMON
TUE
WED
THU
FRI
SAT
SUN
DAILY
EXT12AM 6AM 12PM 6PM 12AM
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick MenuMON
TUE
WED
THU
FRI
SAT
SUN
DAILY
EXT12AM 6AM 12PM 6PM 12AM
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
Advanced
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Time Table
REC Program
Event Program
Special Days
Quick MenuSETUPSETUPSETUPSETUP
 Event Program 1 Event Program 2 Event Program 3 Event Program 4  Operation Mode  Auto Copy VMD
OK
ALARMOFF
CANCEL
Advanced 
						

							122
nSelect OK using the arrows button (CDAB), and
press the SET button.
Notes:
•The start time and end time can be set in 15 min-
utes intervals.
•To copy a timetable that is set for a different day of
the week, select Copy the Other Time Table and
select a day of the week by rotating the jog dial in
step 3.
Then, move the cursor to the day of the week box,
press the arrows button (B) and select a day of the
week by rotating the jog dial. After selecting, move
the cursor to OK and press the SET button.
•When you move the cursor to CANCEL in step 6
and press the SET button, the setting will be can-
celed and the pop-up settings menu of the
timetable for the selected day of the week will close.
[Screenshot 5]
The settings are applied to the selected timetable and the
timetable for all the days of the week will be displayed.
mMove the cursor to the time zone of the day of the week
to which the REC program is to be assigned using the
arrows button (CDAB).
,Rotate the jog dial to select a desired REC program/
Event program.
(Rotating the jog dial changes the displayed REC pro-
gram.)
REC program will be displayed with different colors.
Yellow:REC program 1/Event program 1
Green:REC program 2/Event program 2
Pale purple:REC program 3/Event program 3
Indigo blue:REC program 4/Event program 4
It is possible to display the assigned REC Program/
Event Program window (pages 119 and 120) by press-
ing the SET button.
Repeat steps 7 and 8 to assign REC program to other
timetables.
.Move the cursor to OK using the arrows button and
press the SET button.
→The REC program/Event program will be assigned
to the selected time zone and the selected
timetable window will be closed. [Screenshot 2]
The pop-up setting menu of the timetable for every day of
the week will be displayed.
The cursor will be displayed and will move to MON
(Monday).
xSelect a day of the week using the arrows button (CD)
and press the SET button.
Note:When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel the external
recording mode changeover terminal (pin no. 24) of
the unit will work with the set timetable for EXT. 
[Screenshot 3]
The pop-up settings menu of the timetable for the selected
day of the week will be displayed.
cSelect New Time Table Setup using the arrows button
(CD) and rotate the jog dial to check the radio button.
[Screenshot 4]
The radio button for New Time Table Setup is checked.
vMove the cursor to the start time input box for Period 1
using the arrows button (CDAB).
bRotate the jog dial to set the start time.
The end time can be set in the same way.
Repeat steps 4 and 5 to set for Period 2 - Period 6.
(It is not necessary to set for all of Period 1 - Period
6.)
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
Time Table  (MON)     Copy the Other Time Table
     New Time Table  SetupPeriod 1
Period 2
Period 3
Period 4
Period 5
Period 612  :  00  AM
08  :  00  AM
12  :  00  PM
01  :  00  PM
05  :  00  PM
09  :  00  PM08  :  00  AM
12  :  00  PM
01  :  00  PM
05  :  00  PM
09  :  00  PM
12  :  00  AM
O K
TUE
CANCEL
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
AdvancedTime Table  (MON)     Copy the Other Time Table
     New Time Table  SetupPeriod 1
Period 2
Period 3
Period 4
Period 5
Period 612  :  00  AM
08  :  00  AM
12  :  00  PM
01  :  00  PM
05  :  00  PM
09  :  00  PM08  :  00  AM
12  :  00  PM
01  :  00  PM
05  :  00  PM
09  :  00  PM
12  :  00  AM
O K
TUE
CANCEL
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
MON
TUE
WED
THU
FRI
SAT
SUN
DAILYEXTOKCANCEL
12AMREC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT6AM 12PM 6PM 12AMAdvanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
MON
TUE
WED
THU
FRI
SAT
SUN
DAILYEXTOKCANCEL
12AMREC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT6AM 12PM 6PM 12AMAdvanced 
						

							123
Note:When the SET button is pressed after moving the
cursor to CANCEL in step 9, the settings will be
canceled and the selected timetable window will be
closed.
[Special Days] Perform the settings for
recording programs for special days 
Assign timetables to special days aside from other days of
the week. Timetables for special days can be set for up to
30 days.
Perform the settings to specify dates as special days and
apply the recording schedule to the special days. 
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
Time Table
REC Program
Event Program
Special Days
Quick Menu1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M1
--
--
--
--
--
--
--
--
--
--
--
--
--
--D
D
D
D
D
D
D
D
D
D
D
D
D
D
DSUN
--
--
--
--
--
--
--
--
--
--
--
--
--
--16
17
18
19
20
21
22
23
24
25
26
27
28
29
30--
--
--
--
--
--
--
--
--
--
--
--
--
--
--M
M
M
M
M
M
M
M
M
M
M
M
M
M
M--
--
--
--
--
--
--
--
--
--
--
--
--
--
--D
D
D
D
D
D
D
D
D
D
D
D
D
D
D--
--
--
--
--
--
--
--
--
--
--
--
--
--
-- 1
--
--
--
--
--
--
--
--
--
--
--
--
--
--DATE MODEDATE MODEAdvanced 
						

							124
Perform the settings for image switching such as the
sequential display setting or the waiting screen (while log-
ging out) setting for displaying on monitors 1 and 2.
[Monitor 1] Switcher function of monitor 1 
Perform the settings for the switcher function of monitor 1.
8Live Sequence
Perform the settings for the sequential display of live
images as follows.
[Screenshot 1]
Start operation from the Monitor1 menu of Switcher on
the SETUP MENU.
zMove the cursor to Live Sequence using the arrows
button (CD) and press the SET button.
 [Switcher] Settings for the switcher function
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Monitor 1
Monitor 2
Quick Menu Live Sequence Sequence Timing Auto Skip Login Screen Secret View
SETUP
INTONOFFCAM1
Advanced
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Monitor 1
Monitor 2
Quick Menu Live Sequence Sequence Timing Auto Skip Login Screen Secret View
SETUP
INTONOFFCAM1
Advanced
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Monitor 1
Monitor 2
Quick Menu Live Sequence Sequence Timing Auto Skip Login Screen Secret View
SETUP
INTONOFFCAM1
Advanced
[Screenshot 2]
The Live Sequence pop-up menu will be displayed.
xMove the cursor to CAM of STEP 1 using the arrows
button (CDAB).
[Screenshot 3]
The cursor moves to CAM.
cSelect how to display images from camera channels in
STEP 1 from the following by rotating the jog dial.
1, 2, ... , 16:Displays an image from the selected cam-
era channel on a single screen.
1 - 4:Displays images from camera channels
1 - 4 on a 4-split screen.
5 - 8:Displays images from camera channels
5 - 8 on a 4-split screen.
9 - 9 (only for the WJ-HD309A):Displays an image
from camera channel 9 on the upper left area on a
4-split screen.
9 - 12 (only for the WJ-HD316A):Displays images
from camera channels 9 - 12 on a 4-split screen.
13 - 16 (only for the WJ-HD316A):Displays images
from camera channels 13 - 16 on a 4-split screen.
1 - 9:Displays images from camera channels 1 - 9 on a
9-split screen.
10 - 16 (only for the WJ-HD316A):Displays images
from camera channels 10 - 16 on a 9-split screen.
--:Skips the selected step.
vWhen displaying images from camera channels 1 - 16
on a single screen is selected in step 3, select the cam-
era position.
Move the cursor to PRESET in STEP 1 using the
arrows button (CDAB).
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Monitor 1
Monitor 2
Quick Menu Live Sequence Sequence Timing Auto Skip Login Screen Secret View
SETUP
INTOFF
CAM1OFF
OKCANCEL
1
2
3
4
5
6
7
8--
--
--
--
--
--
--
--2s
2s
2s
2s
2s
2s
2s
2s--
--
--
--
--
--
--
--2s
2s
2s
2s
2s
2s
2s
2s 9
10
11
12
13
14
16
159
10
11
12
13
14
15
16
CAMPRESETDWELLSTEP CAMPRESETDWELLSTEP
1
2
3
4
5
6
7
8Advanced
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Monitor 1
Monitor 2
Quick Menu Live Sequence Sequence Timing Auto Skip Login Screen Secret View
SETUP
INTOFF
CAM1OFF
OKCANCEL
1
2
3
4
5
6
7
8--
--
--
--
--
--
--
--2s
2s
2s
2s
2s
2s
2s
2s--
--
--
--
--
--
--
--2s
2s
2s
2s
2s
2s
2s
2s 9
10
11
12
13
14
15
169
10
11
12
13
14
15
16CAMPRESETDWELLSTEP CAMPRESETDWELLSTEP
1
2
3
4
5
6
7
8Advanced 
						

							125
8Auto Skip
Select ON of OFF to determine whether or not to skip the
camera channel without supplying the video input signal
because it is not connected, etc.
ON:Skips a channel if it is not connected.
OFF:Displays a black screen for a channel not connected.
8Login Screen
Select a camera image to be displayed during the login
procedure from the following.
CAM1 - 16:Displays an image from the selected camera
channel.
QUAD1 - 4:Displays images from camera channels 1 - 4
on a 4-split screen.
QUAD5 - 8:Displays images from camera channels 5 - 8
on a 4-split screen.
QUAD9 (only for the WJ-HD309A):Displays an image
from camera channel 9 on the upper left area on a 4-
split screen.
QUAD9 - 12 (only for the WJ-HD316A):Displays images
from camera channels 9 - 12 on a 4-split screen.
QUAD13 - 16 (only for the WJ-HD316A):Displays images
from camera channels 13 - 16 on a 4-split screen.
7SCREEN:Displays images from camera channels 1 - 7 on
a 7-split screen.
9SCREEN (only for the WJ-HD309A):Displays an image
from camera channel 1 - 9 on a 9-split screen.
9SCREEN1 - 9 (only for the WJ-HD316A):Displays
images from channels 1 - 9 on a 9-split screen.
9SCREEN10 - 16 (only for the WJ-HD316A):Displays
images from camera channels 10 - 16 on a 9-split
screen.
10SCREEN (only for the WJ-HD316A):Displays images
from camera channels 1 - 10 on a 10-split screen.
13SCREEN (only for the WJ-HD316A):Displays images
from camera channels 1 - 13 on a 13-split screen.
16SCREEN (only for the WJ-HD316A):Displays images
from camera channels 1 - 16 on a 16-split screen.
--:No camera image will be displayed (black screen)
8Secret View
The secret view is a function to display a black screen on
monitor 1 when camera images are displayed with a single
screen on monitor 2. Select ON or OFF to determine
whether to enable or disable the secret view function.
ON:Enables the secret view function. (Camera images dis-
played with a single screen on monitor 2 will be dis-
played while monitor 1 has a black screen.)
OFF:Disables the secret view function. [Screenshot 4]
The cursor moves to the PRESET in STEP 1.
bRotate the jog dial to select a preset position number
for which image is displayed in STEP 1 from the follow-
ing.
1 - 256:Moves to the selected preset number.
--:Does not move to the preset position.
nSelect DWELL in STEP 1 using the arrows button (C
DAB).
[Screenshot 5]
The cursor moves toDWELL in STEP 1.
mRotate the jog dial to select an interval time to go to the
next sequential step from 1 - 30 seconds (in 1 second
intervals).
The sequence step is skipped when 0 s is selected.
Repeat steps 2 and 7 to set for the other sequence
steps.
,Move the cursor to OK using the arrows button (CD
AB), and press the SET button.
→The settings for the sequential display are set and
the sequence setting menu closes.
Note:If you move the cursor to CANCEL in step 8 and
press the SET button, the setting will be canceled
and the sequence setting menu will be closed.
8Sequence Timing
Select an image switching method from the following.
INT:Switches images according to the settings for Live
sequence of  Switcher.
EXT:Switches images when receiving a signal from an
external device.
MON 2:Match with the image switching timing of the live
sequence on monitor 2.
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Monitor 1
Monitor 2
Quick Menu Live Sequence Sequence Timing Auto Skip Login Screen Secret View
SETUP
INTOFFOFFCAM1
OKCANCEL
1
2
3
4
1-4
5-8
9-12
13-161
1
64
5
--
--
--
--2s
2s
2s
2s
2s
2s
2s
2s--
--
--
--
--
--
--
--2s
2s
2s
2s
2s
2s
2s
2s 9
10
11
12
13
14
15
161-8
9-16
11
12
1-4
5-8
9-12
13-16STEP
1
2
3
4
5
6
7
8CAMDWELLSTEP CAMPRESETDWELLPRESETAdvanced
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Monitor 1
Monitor 2
Quick Menu Live Sequence Sequence Timing Auto Skip Login Screen Secret View
SETUP
INTOFFOFFCAM1
OKCANCEL
1
2
3
4
1-4
5-8
9-12
13-161
1
64
5
--
--
--
--2s
2s
2s
2s
2s
2s
2s
2s--
--
--
--
--
--
--
--2s
2s
2s
2s
2s
2s
2s
2s 9
10
11
12
13
14
15
161-8
9-16
11
12
1-4
5-8
9-12
13-16STEP
1
2
3
4
5
6
7
8CAMDWELLSTEP CAMPRESETDWELLPRESETAdvanced 
						

							126
[Monitor 2] Switcher function of monitor 2
Perform the settings for the switcher function of monitor 2.
8Live Sequence
The settings for Live Sequence are the same as for
Monitor1. Refer to page 124 for further information.
8Sequence Timing
Select an image switching method from the following.
INT:Switches images according to the settings for Live
sequence of  Switcher.
EXT:Switches images when receiving a signal from an
external device.
Notes:
•Select EXT when an external device that can transmit
a sequence signal is connected.
•The sequence changeover I/O (pin no.21) of the
ALARM/CONTROL connector on the rear panel will
supply signals when INT is selected and will receive
signals when EXT is selected.
8Auto Skip
The settings for Auto Skip are the same as for Monitor1.
Refer to page 125 for further information.
8Login Screen
The settings for Login Screen are the same as for
Monitor1. Refer to page 125 for further information.
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Monitor 1
Monitor 2
Quick Menu Live Sequence Sequence Timing Auto Skip Login Screen
SETUP
INTONCAM1
Advanced 
						

							127
[Screenshot 2]
The camera title pop-up window will be displayed.
xMove the cursor to CAM1 using the arrows button (C
DAB).
[Screenshot 3]
The cursor moves to CAM1.
cSelect a character to be entered by rotating the jog dial.
Up to 16 characters can be entered.
vMove the cursor to the right side of the entered charac-
ter using the arrows button. 
Repeat steps 3 and 4 to enter the camera title.
Notes:
•To correct the entered characters, move the cursor
to the character to be corrected and press the
STOP button to delete it. Enter a correct character
after deleting.
•To copy the camera title that has been set for
another camera channel, follow the procedure
below.
1. Move the cursor to CAM 1 in step 2 above and
press the SET button. The following screen will
be displayed.
2. Select the camera channel for which the cam-
era title is to be copied by rotating the jog dial. Perform the display settings for monitors 1 and 2 connected
to the unit.
[OSD Setup]
Perform the On Screen Display settings for monitor 1 and
monitor 2 such as the settings of camera titles or the set-
tings of the time display position.
8Camera Title
Perform the settings for the camera title. It is possible to
display a camera title on the monitor 1/monitor 2, and
record it as a part of the recorded image (page 111). Do
the following to set the camera title.
[Screenshot 1]
Start operation from the OSD Setup menu.
zMove the cursor to Camera Title using the arrows but-
ton (C D) and press the SET button.
 [Display]
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuSETUPL-UPPERR-LOWERWHITE
 Camera Title Time & Date Display Position  Camera Title Display Position Line Color on the Multi Screen
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuSETUPL-UPPERR-LOWERWHITE
 Camera Title Time & Date Display Position  Camera Title Display Position Line Color on the Multi Screen
OKCANCELCAM8 CAM7
CAM6
CAM5
CAM4
CAM3
CAM2
CAM1
CAM8 CAM7
CAM6
CAM5
CAM4
CAM3
CAM2
CAM1AdvancedScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuSETUPL-UPPERR-LOWERWHITE
 Camera Title Time & Date Display Position  Camera Title Display Position Line Color on the Multi Screen
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuSETUPL-UPPERR-LOWERWHITE
 Camera Title Time & Date Display Position  Camera Title Display Position Line Color on the Multi Screen
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuSETUPL-UPPERR-LOWERWHITE
 Camera Title Time & Date Display Position  Camera Title Display Position Line Color on the Multi Screen
OKCANCELCAM8 CAM7
CAM6
CAM5
CAM4
CAM3
CAM2
CAM1
CAM8 CAM7
CAM6
CAM5
CAM4
CAM3
CAM2
CAM1  Copy Another Camera Title
O K
CAM2
CANCEL
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuSETUPL-UPPERR-LOWERWHITE
 Camera Title Time & Date Display Position  Camera Title Display Position Line Color on the Multi Screen
OKCANCELCAM8 CAM7
CAM6
CAM5
CAM4
CAM3
CAM2
CAM1
Advanced 
						

							128
3. Move the cursor to OK using the arrows button
(CDAB), and press the SET button. The
camera title will be copied.
•The available characters for a camera title are dif-
ferent depending on the selected language as fol-
lows.

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P
Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r
s t u v w x y z À Ä Â Æ Ç É Ì Ñ Ò Ö Ù Ü Ø ß à á â ä
å æ ç è é ê ë ì í î ï ñ ò ó ô ö ù ú û ü ø ?  # & ( ) * + ,
- . / : ; SP

0123456789ABCDEFGHIJKLMNOPQRSTU
VWXYZabcdefghijklmnopqrstuvwxyzÄÅÇÉ
ÑÖ›Üáàâäãåçéèêëíìîïñóòôöõúù
ûü?"#&()*+,-./:;SP
[Screenshot 4]
The camera title is entered.
bPress the arrows button (CDAB) to move the cursor
to OK and press the SET button.
When the arrows button (C) is pressed while OK or
CANCEL is selected, the camera title pop-up window
for CAM9 - 16 will be displayed. Repeat steps 2 - 4 to
enter the camera title for CAM9 - 16.
Notes:
•If you move the cursor to CANCEL in step 5 and
press the SET button, the setting will be canceled
and the setting window of the camera title will be
closed.
•It is possible to set Camera Title [Display] to dis-
play a camera title on monitor 2 and Camera Title
[Embedded] to embed/display a camera title on
monitor 1 individually using a PC via a network.
Refer to the Network Setup Instruction (PDF) for fur-
ther information.8Time & Date Display Position
Select a time and date display position from the following.
L-UPPER:Displays the time at the upper left of the screen.
R-UPPER:Displays the time at the upper right of the
screen.
L-LOWER:Displays the time at the lower left of the screen.
R-LOWER:Displays the time at the lower right of the
screen. 
Notes:
•When setting the time and date to be recorded together
with images, the time display will be recorded in the
selected position.
•Refer to page 111 for further information about
Embedded REC (Time & Date).
8Camera Title Display Position
Select a camera title display position from the following.
L-UPPER:Displays a camera title at the upper left of the
screen.
R-UPPER:Displays a camera title at the upper right of the
screen.
L-LOWER:Displays a camera title at the lower left of the
screen.
R-LOWER:Displays a camera title at the lower right of the
screen.
CENTER:Displays a camera title at the center of the
screen.
Notes:
•When setting the camera title to be recorded together
with images, the camera title display will be embedded
in the selected position.
•Refer to page 111 for further information about
Embedded REC (title).
8Line Color on the Multi Screen
Select a line color from the following.
WHITE:Displays white lines.
GRAY:Displays gray lines.
BLACK: Displays black lines.
[Monitor 1] Settings on monitor 1 display
Select ON and OFF whether or not to display the time, cam-
era title and alarm display on monitor 1.
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuON Time & Date Display   Camera Title  Display  Alarm DisplayON ON
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuSETUPL-UPPERR-LOWERWHITE
 Camera Title Time & Date Display Position  Camera Title Display Position Line Color on the Multi Screen
OKCANCELCAM8 CAM7
CAM6
CAM5
CAM4
CAM3
CAM2
CAM1
CAM8 CAM7
CAM6
CAM5
CAM4
CAM3 CAM1
ENTRANCE
Advanced
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuSETUPL-UPPERR-LOWERWHITE
 Camera Title Time & Date Display Position  Camera Title Display Position Line Color on the Multi Screen
OKCANCELCAM16 CAM15
CAM14
CAM13
CAM12
CAM11
CAM10
CAM9
CAM16 CAM15
CAM14
CAM13
CAM12
CAM11 CAM9
CAM10
Advanced 
						

							129
8Time & Date Display
Select ON and OFF whether or not to display the time.
ON:Displays time.
OFF:Does not function.
8Camera Title Display
Select ON and OFF whether or not to display the camera
title.
ON:Displays the camera title.
OFF:Does not function.
8Alarm Display
Select ON and OFF whether or not to activate the alarm dis-
play at an event occurrence.
ON:Displays the alarm display at an event occurrence.
OFF:Does not function.
[Monitor2] Settings on monitor 2 display
Perform the display settings for monitor 2 such as the dis-
play mode (task bar style), time display position on/off,
camera title display position, etc.
8Display Mode
Select a display mode (task bar style) from the following.
Refer to page 13 for further information about the task bar.
MODE 1:Select [MODE 1] for the display mode.
MODE 2:Select [MODE 2] for the display mode.
MODE 3:Select [MODE 3] for the display mode.
8T & D and Status Display Position
When selecting MODE 1, select the position of the time and
date display and the status from the following.
UPPER:Displays them in the upper part of the screen.
LOWER:Displays them in the lower part of the screen.
8Camera Title Display
Select ON and OFF whether or not to display the camera
title.
ON:Displays the camera title.
OFF:Does not function.
ScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording Event
OSD Setup
Monitor 1
Monitor 2
Quick MenuMODE 1 Display Mode   T&D and Status Display Position Camera Title  DisplayON LOWER
Advanced 
						

							130
It is necessary to adjust the communication speed and use
the same communication protocol with external devices
such as a controller when connecting those external
devices to the DATA port or the SERIAL connector
(RS232C).
It is also necessary to perform the settings for the network
such as the IP address and the gateway address when
operating this unit a PC via a network such as a LAN.
These are the descriptions of how to perform the required
settings for communication with external devices.
[Camera Control] Settings for the communi-
cation method and the cable compensation
for camera control
Select a communication method for each camera channel
to control cameras from the following.
COAX:Controls camera with the coaxial communication
(CAM 1 - 8 CH are available for the WJ-HD316A, CAM
1 - 6 CH are available for the WJ-HD309A)
PSD:Controls camera with the PS·Data. (CAM 1 - 16 CH
are available for the WJ-HD316A, CAM 1 - 9 CH are
available for the WJ-HD309A)
RS485:Controls camera with the RS485 communication.
(CAM 1 - 16 CH are available for the WJ-HD316A, CAM
1 - 9 CH are available for the WJ-HD309A)
OFF:Does not control camera (CAM 1 - 16 CH are avail-
able) 
Notes:
•Perform settings according to the cameras connected
to this unit.
•CAM 9-16 control 4 cameras each (only for the WJ-
HD316A).
•When using the coaxial communication to control cam-
eras, connect cameras to the VIDEO IN connectors 1 -
8 for the WJ-HD316A (1 - 6 for the WJ-HD309A) (coaxi-
al communication compatible). When controlling cam-
eras connected to other VIDEO IN connectors with
coaxial communication, use a coaxial communication
unit (WJ-MP204). In this case, select PSD for the com-
munication method for the camera channels to be con-
trolled through the coaxial communication unit.•To prevent operation mistakes, set the unused camera
channels to off.
It is possible to compensate for the video signal trans-
mission loss from the camera when using the VIDEO IN
connector 1 - 8. (cable compensation)
Perform the settings for the cable compensation
according to the length of cable used.
S:When the length of cable used is shorter than 500 m
M:When the length of cable used is longer than 500 m
and shorter than 900 m
L:When the length of cable used is longer than 900 m
and shorter than 1 200 m
Notes:
•Use 5C-2V cables for the cable compensation.
•Perform the settings for the cable compensation prop-
erly according to the cable length. Otherwise camera
pictures may not be displayed/recorded correctly.
[PS.DATA Setup] Settings for the PS·Data 
Perform the following settings for the PS·Data.
8Unit Address (System)
A unit address (System) is a unique number assigning to
PS·Data devices. The addresses must be unique to identify
system devices when connecting multiple devices compati-
ble with PS·Data. Numbers, 001-099, are to be assigned
as the unit addresses to the system devices.
8Unit Address (Controller)
The unit address (controller) is used to control a PS·Data
device connected to this unit. Numbers, 001 - 099 are to
be assigned.
8Cascade
Select ON or OFF whether or not to use the cascade con-
nection.
Set this to ON when connecting two or more units in the
cascade connection.
ON:Select this when connecting units in the cascade con-
nection.
OFF:Does not function.
[Comm] Settings for communication with other devices
ScheduleMaintenanceCommSwitcherSETUP MENULIVESystemRecording Event
Display
Camera Control
PS.DATA Setup
RS485 Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
Quick Menu Type of Camera Control
CAM1
CAM2
CAM3
CAM4
CAM5
CAM6
CAM7
CAM8CAM9
CAM10
CAM11
CAM12
CAM13
CAM14
CAM15
CAM16RS485PSD S
S S
S
S
S
S
SCOAX
COAX COAX
COAX
COAX
COAX
COAX
COAXCAM CAM TYPECOMP TYPE
Advanced
ScheduleMaintenanceCommSwitcherSETUP MENULIVESystemRecording Event
Display
Camera Control
PS.DATA Setup
RS485 Setup
RS232C Setup
NW Setup 1
NW Setup 2
NTP Setup
Quick Menu
SETUP
001
001
1s OFF
1
NONE
8
9600
OFF
  Unit Address(System)  Unit Address(Controller)  Cascade  Baud Rate  Data Bit  Parity  Stop Bit  Retry Timing  Alarm Data  Camera Number Setup
Advanced