Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions

							41
 Search for a marked point and
play from that point (Marking
search)
Display the recording time of the recorded images with a
marked point in a list or a thumbnail and select the desired
recording time to play. Refer to page 24 for further informa-
tion about marking.
Note:Marking search is available only when HDD normal
area or event recording area is selected as the
recording area with the DISK SELECT window.
zPress the SEARCH button repeatedly until the
marking list window is displayed.
The result list of the marking search will be displayed on
monitor 2 and the VGA monitor.
Use the arrows button (CD) to switch between displaying
the list window and the thumbnail window alternately. To delete all displayed marking lists, press the camera
selection buttons [1] and [2] simultaneously for 2 seconds
or more when displaying the marking list window.
xRotate the jog dial or the shuttle ring to select
the desired marked time.
cPress the PLAY/PAUSE button.
The LISTED indicator and the indicator on the PLAY/PAUSE
button will light, and playback of a recorded image from the
selected marked time will start.
Notes:
• It is possible to skip from the playback point to the list-
ed time (marked time) by rotating the jog dial when the
LISTED indicator is lit.
To return to normal playback, press the LISTED button.
• It is possible that some recorded images with marked
points may have been deleted by overwrite recording
or the delete function.
vPress the STOP button.
The indicator on the PLAY/PAUSE button will go off and
playback will be stopped.
Live images will be displayed on monitor 2 and the VGA
monitor.
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
PAN/
TILT
xxzz
cv
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01chCAM
AUG.20.04 4:39:38 PM
AUG.20.04 4:31:01 PM
AUG.20.04 4:17:35 PM
AUG.20.04 3:30:01 PM
AUG.20.04 3:00:05 PM
AUG.20.04 2:45:18 PM
AUG.20.04 2:40:31 PM
AUG.20.04 2:35:31 PM
TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARKTOTAL AUG.20.04 4:39:38 PM  AUG.20.04 2:31:22 PM 100
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01chCAM
AUG.20.04 4:39:38 PM
AUG.20.04 4:31:01 PM
AUG.20.04 4:17:35 PM
AUG.20.04 3:30:01 PM
AUG.20.04 3:00:05 PM
AUG.20.04 2:45:18 PM
AUG.20.04 2:40:31 PM
AUG.20.04 2:35:31 PM
TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARKTOTAL AUG.20.04 4:39:38 PM  AUG.20.04 2:31:22 PM 100
TIME&DATE
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01chCAM
AUG.20.04 4:39:38 PM
AUG.20.04 4:31:01 PM
AUG.20.04 4:17:35 PM
AUG.20.04 3:30:01 PM
AUG.20.04 3:00:05 PM
AUG.20.04 2:45:18 PM
AUG.20.04 2:40:31 PM
AUG.20.04 2:35:31 PM
TIME&DATE    SEARCH    REC EVENT    SEARCH    VMD    SEARCH    MARKTOTAL AUG.20.04 4:39:38 PM  AUG.20.04 2:31:22 PM 100
⇔ 
						

							42
MONITOR LIVE IMAGES
It is possible to display live images on a single screen or a
multi-screen, or on a single sequential display (Displayed
images from cameras on a single screen will be automati-
cally switched.).
 Displaying Live Images on a
Single Screen
zPress the MONITOR1/MONITOR2 button to
select the monitor.
When monitor 1 is selected, the indicator will light.
When monitor 2 or the VGA monitor is selected, the indica-
tor will not light.
xPress a camera selection button 
(1 - 16 for the WJ-HD316A, 1 - 9 for the WJ-
HD309A) to select a camera.
Live images from the selected camera will be displayed
and the respective camera selection button will light green
or blue.
When monitor 2 is selected, live images will be displayed
on the VGA monitor.Notes:
• When live images from the audio assigned camera
channel (audio is assigned on the SETUP MENU:
Recording - REC Setup - Audio Allocation) are dis-
played on a single screen, audio from the respective
camera channel will be heard.
• When the GO TO LAST button is pressed for 2 seconds
or more while displaying live images, playback of the
latest recorded images will start. (At the default setting,
playback will start from 30 seconds before the start time
of the latest recorded images.)
 Electronic Zoom
When displaying a single screen, zooming in on the dis-
played image is possible.
Electronic zoom is available only on the selected monitor.
When the MONITOR1/MONITOR2 indicator is lit (the moni-
tor 1 is selected), electronic zoom works only on monitor 1.
zPress the SHIFT button when monitoring live
images on a single screen.
The SHIFT indicator will light.
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2 RMONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
zx
zx
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2 RMONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
zx
zx 
						

							43
xPress the EL-ZOOM button to enlarge the dis-
played image.
The displayed image will be displayed with x2 zoomed
size.
Zooming level will change each time the EL-ZOOM button
is pressed.
x2 →x4 →OFF
Notes: 
• When an image is zoomed in on (x2 or x4), it is possible
to move the zoomed image using the arrows button.
• When any indicator of PAN/TILT, ZOOM/FOCUS, IRIS,
PRESET/AUTO is lit, it is impossible to use the EL-
ZOOM function.
 Displaying on a Multi-screen
It is possible to display images on a multi-screen (4, 7, 9,
10, 13, 16 for the WJ-HD316A, 4, 7, 9 for the WJ-HD309A).
Notes:
• Audio will not be heard when displaying images on a
multiscreen.
• When the GO TO LAST button is pressed for 2 seconds
or more while displaying live images, playback of the
latest recorded images will start. (At the default setting,
playback will start from 30 seconds before the start time
of the latest recorded images.)
zPress the MONITOR1/MONITOR2 button to
select the monitor.
When monitor 1 is selected, the indicator will light.
When monitor 2 is selected, the indicator will not light.
xPress the SHIFT button.
The SHIFT indicator will light.
cPress a camera selection button 1 - 6 (1 - 3 for
the WJ-HD309A) to select a desired multi-
screen.
Camera selection button 1: 4-split screen
Camera selection button 2: 7-split screen
Camera selection button 3: 9-split screen
Camera selection button 4: 16-split screen (Only for the WJ-
HD316A)
Camera selection button 5: 10-split screen (Only for the WJ-
HD316A)
Camera selection button 6: 13-split screen (Only for the WJ-
HD316A)
The camera selection buttons respective to the live images
displayed on a multi-screen will light green or blue.
When monitor 2 is selected in step 1, live images will also
be displayed on the selected multi-screen on the VGA mon-
itor.
To display on a single screen
Press the SHIFT button. The SHIFT indicator will go off.
Press any of the camera selection buttons.
Live images will be displayed on a single screen.
When displaying on a 4-split screen
Each time the camera selection button 1 is pressed, the
displayed camera channels will be changed as follows:
WJ-HD316A: 1-4 CH →5-8 CH →9-12 CH →13-16 CH
WJ-HD309A: 1-4 CH →5-8 CH →9 CH
When displaying on a 9-split screen
Each time the camera selection button 3 is pressed, the
displayed camera channels will be changed as follows:
Only for the WJ-HD316A: 1-9 CH →10-16 CH
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2 RMONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
zc
x
z
c
x 
						

							44
 Sequential Display
Displayed images from cameras will be switched automati-
cally.
Camera images will be displayed sequentially according to
the settings performed in advance.
zPress the MONITOR1/MONITOR2 button to
select the monitor.
When monitor 1 is selected, the indicator will light.
When monitor 2 is selected, the indicator will not light.
xPress the SHIFT button.
The SHIFT indicator will light.
cPress the SEQ button.
The camera selection button respective to the displayed
image will light green or blue.
To stop sequential display, press the SEQ button.
When trying to display on a single screen or multi-screen
during the sequential display, the sequential display will be
stopped.
When monitor 2 is selected in step 1, the sequential display
will also start on the VGA monitor.
Notes:
• It is possible to skip a sequential step (camera channel)
if no video input is supplied (Auto skip function). Refer
to a system administrator for further information.
• Cameras that are out of the controllable range set by
the camera partitioning function will be skipped. Refer
to the Network Setup Instructions (PDF) for further infor-
mation about the camera partitioning.
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2 RMONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
zc
x
z
c
x
• When the GO TO LAST button is pressed for 2 seconds
or more while displaying live images, playback of the
latest recorded images will start. (At the default setting,
playback will start from 5 seconds before the start time
of the latest recorded images.) 
						

							45
CONTROL CAMERAS
When displaying live images, the following camera controls
are possible.
• Panning/Tilting: Moves a camera horizontally/vertically.
• Zooming: Zooms in/out on images.
• Focus: Adjusts the focus.
• Iris: Adjusts the iris of the lens.
• Preset Action: Moves a camera to the preset position
registered in advance.
• Auto Function: Moves a camera with an auto function
set in advance.
Notes:
• Controlling cameras is possible only when displaying
images on a single screen.
• Depending on models of the connected cameras, it
may be impossible to control the camera or some func-
tions may not be available.
• When a user with higher priority is controlling the select-
ed camera, it may be impossible to control the camera.
Refer to page 66 for further information about priority.
• Refer to page 139 for descriptions of how to display
and perform the settings with the settings menu of the
camera from this unit.
 Panning/Tilting
Moves a camera horizontally/vertically.
zPress the PAN/TILT button.
The PAN/TILT indicator will light.
xUse the arrows button to adjust the vertical or
horizontal position.
Camera will move slowly by pressing the arrows button
while holding the PAN/TILT SLOW button down.
cPress the camera selection button ([1] - [16] for
the WJ-HD316A, [1] - [9] for the WJ-HD309A)
respective to the controlled camera channel to
quit the panning/tilting operation.
 Zooming
Zooms in/out on images. Depending on models of the con-
nected cameras, the image size for the respective zooming
level may be different. For further information, refer to the
operating instruction for the camera.
zPress the ZOOM/FOCUS button.
The ZOOM/FOCUS indicator will light.
xUse the arrows button (CD) to zoom in on or
out of the displayed image.
Press the arrows button downward (C) to zoom out and
upward (D) to zoom in.
cPress the camera selection button ([1] - [16] for
the WJ-HD316A, [1] - [9] for the WJ-HD309A)
respective to the controlled camera channel to
quit the zooming operation.
 Focus
Adjusts the focus. The auto focus function is available.
zPress the FOCUS button.
The ZOOM/FOCUS indicator will light.
R
2 R
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
zxxc
PAN/
TILT
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
zx
PAN/
TILT
c
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
zxx
PAN/
TILT
c 
						

							46
xUse the arrows button (AB) to adjust the
focus.
Press the arrows button (A) to shift the focus nearer.
Press the arrows button (B) to shift the focus farther.
Auto focus is available by pressing the SET button.
cPress the camera selection button ([1] - [16] for
the WJ-HD316A, [1] - [9] for the WJ-HD309A)
respective to the controlled camera channel to
quit the focusing operation.
 Iris
Adjusts the iris of the lens.
zPress the IRIS button.
The IRIS indicator will light.
xUse the arrows button (AB) to adjust the iris.
Press the arrows button (A) to close the iris.
Press the arrows button (B) to open the iris.
To reset the set iris, press the SET button.
cPress the camera selection button ([1] - [16] for
the WJ-HD316A, [1] - [9] for the WJ-HD309A)
respective to the controlled camera channel to
quit the iris operation.
 Preset Action
Moves a camera to the preset position registered in
advance.
Important:
• When using a camera of the WV-CS650 (WV-CSR650)
series or the WV-CS600 (WV-CSR600) series, register
preset positions using the settings menu of the camera.
• When the monitor 1 is selected, it is impossible to regis-
ter preset positions and move a camera to a preset
position by performing the following steps.
In this case, perform the settings using the setup menu
of camera.
 Register Preset Positions of Cameras
Up to 256 preset positions can be registered.
zPress the PAN/TILT button and move the cam-
era to a desired position to be registered as a
preset position.
xPress the SET button. The REGISTRATION
PRESET POSITION window will be displayed.
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2R
MONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
xzz
xzz
REGISTRATION PRESET POSITION
PRESET NUMBER
OK CANCEL32
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
zxx
PAN/
TILT
c 
						

							47
 Move a camera to the preset position
z
Press the PRESET/AUTO button.
The PRESET/AUTO indicator will light and the PRESET/
AUTO PAN window will be displayed.
xPress a camera selection button 
([1] - [10/0] for the WJ-HD316A, [1] - [9], [0] for
the WJ-HD309A) to select a desired preset
position.
Pressing the camera selection button [10/0] ([0] for the WJ-
HD309A) moves a camera to the home position.
The jog dial can also be used to select a preset position
number by rotating it.
cSelect OK using the arrows button and press
the SET button.
The PRESET/AUTO PAN window will be closed and the
camera will move to the selected preset position.
(It is also possible to close the PRESET/AUTO PAN window
and move the camera to the selected preset position by
pressing the SET button when the cursor is on PRESET
NUMBER.)
cPress a camera selection button 
([1] - [10/0] for the WJ-HD316A, [1] - [9], [0] for
the WJ-HD309A) to register a preset position
number.
The pressed button number will be registered as a preset
position number.
The jog dial also can be used to select a preset position
number by rotating it.
Up to 256 can be registered as preset position numbers.
vSelect OK using the arrows button and press
the SET button.
The adjusted camera position (currently displayed on the
monitor) will be registered as a preset position with the
selected preset position number.
To cancel the selected preset position, select CANCEL
using the arrows button and press the SET button. The set-
ting will be canceled and the REGISTRATION PRESET
POSITION window will be closed.
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2 RMONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
z
cc
xx
z
ccx
x
PRESET / AUTO PAN
PRESET NUMBER
PRESET
AUTO PAN32
OK CANCEL
R
2 RMONITOR1
MONITOR21
5
9
13
2
6
10/0
14
3
7
11
15
4
8
12
16
SEQ SHIFT OSD
STOPPLAY PAUSEREC - REC STOP
ZOOM/
FOCUS
TEXTCOPYDISK SELECT
EL-ZOOM
MARK
LOGOUTIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWD
PAN/TILTSLOW
[WJ-HD316A]
LOGOUT
R
2R
MONITOR1
MONITOR21
4
7
2
5
8
0
3
6
9
TEXT SEQ SHIFT OSDZOOM/
FOCUSCOPYDISK SELECT
EL-ZOOM
MARKIRIS
PRESET
/AUTO
A-B
REPEATGOTO
LAST
LISTED
SEARCH
BUSYSETUP
/ESC
SET
REV
–+
FWDSTOPPLAY PAUSEREC - REC STOP
PAN/TILTSLOW
[WJ-HD309A]
PAN/
TILT
PAN/
TILT
v
cc v
v
cc v 
						

							48
When selecting CANCEL using the arrows button and
press the SET button, the PRESET/AUTO PAN window will
be closed.
 Auto Function (Auto Pan, etc)
Moves a camera with an auto function set in advance.
Important:
When monitor 1 is selected, it is impossible to move a
camera with an auto function by performing the follow-
ing steps.
In this case, perform the settings using the setup menu
of camera.
zPress the PRESET/AUTO button.
The PRESET/AUTO indicator will light and the PRESET/
AUTO PAN window will be displayed.
xMove the cursor to AUTO PAN using the
arrows button and check the radio button next
to AUTO PAN using the jog dial.
cSelect OK using the arrows button and press
the SET button.
The PRESET/AUTO PAN window will be closed and auto
function will start.
During auto function, it is impossible to register a preset
position. To close the PRESET/AUTO PAN window, select
CANCEL using the arrows button and press the SET but-
ton. The setting will be canceled and the PRESET/AUTO
PAN window will be closed.Note:Refer to the operating instructions of the camera for
further information about the auto function of the cam-
era in use.
R
2
R
1
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
zx
xcc
PAN/
TILT
PRESET / AUTO PAN
PRESET NUMBER
PRESET
AUTO PAN32
OK CANCEL 
						

							49
Event Action
ABOUT THE EVENT FUNCTION
The event action will be performed when the following
events occur.
•Motion detection:When motion is detected by the
motion detection function (see below), this is stated as
an event of motion detection.
•Video Loss:When a video signal supply is stopped
because of a cable disconnection or malfunction of a
camera, this is stated as an event of video loss.
•Terminal alarm:When a signal is supplied from an
external device such as a door sensor to the ALARM
terminal, this is stated as an event of the terminal alarm.
•Command alarm:When a command alarm is supplied
from a PC connected to the SERIAL connector on the
rear panel of this unit, this is stated as an event of the
command alarm.
About the Motion Detection Function (VMD)
An alarm signal will be supplied when motion (luminance
transition) is detected in a designated area. It is possible to
save images recorded in the place where motion is detect-
ed, or send e-mails when motion is detected.
Refer to a system administrator for further information about
the required settings for the motion detection function such
as the settings of the detection area.
Action at an event occurrence
The event action will be performed according to the set-
tings when an event occurs.
There are 2 event action modes, the alarm mode (ALARM)
and the activity detection mode (ACT DET), for each event
type. The event action will be different according to the
event action mode set.
When an event of the alarm mode (ALARM) occurs, this unit
activates the alarm action.
About the event action mode
Alarm Mode (ALARM)
This mode announces an event occurrence outside. Action
taken in the alarm mode is referred to as the alarm action.
Activity Detection Mode (ACT DET)
This mode records images in the place where an event
occurred without announcing it.
OFF
Only recording the event log is applicable. Any other event
actions are not applicable.
: Applicable  – : Not applicable
* : Available only when using a PC via a network (Refer to
the Network Setup Instructions (PDF) for further informa-
tion.)
Alarm
ModeActivity
Detection ModeOFF
–
–
–
–
–
–
–
–
–

– Start recording.
Displays event information
on the monitor.
Sounds the buzzer.  Blinks the alarm indicator.
* Switches from a dis-
played image to the
image from the location
of the alarm occurrence.
* Moves a camera to the
preset position. 
* Announces an event
occurrence by sending
e-mails.
* Announces an event
occurrence by the
PS·Data/Serial (RS232C)
commands.
Supplies a signal from the
ALARM connector or the
ALARM/CONTROL con-
nector on the rear panel of
this unit (Alarm signal out-
put).
Records the event log.
* Transmits images to an
FTP server.

 







–
– –
–

–
–
–

– 
						

							50
Alarm Function
 Blinks the ALARM indicator on the front
panel
 Switches from the images displayed on
monitor 1 and monitor 2 to the images from
the location of the alarm occurrence (on a
single screen) Displays the event information in the alarm
display area on monitor 1 and the camera
title display area on monitor 2


 Sounds the buzzer
Contact a system administrator about sounding duration.
 Announces an event occurrence to the con-
nected system device (Alarm Output)
Sends a signal to the device connected to the
ALARM/CONTROL connector, and the connected device
such as a buzzer will be activated.
 Starts recording automatically
Starts recording the image from the location of the event
occurrence automatically.
 Moves a camera to the preset position
A camera will move to the preset position registered in
advance.
 Announces an event occurrence by sending
e-mails
E-mails will be sent to addresses registered in advance.
Refer to the Network Operating Instructions (PDF) on the
provided CD-ROM.
ALARMTIMER
HDD 2
ERROR
HDD 1 ALARM
SUSPEND
ALARM
RESETOPERATE
MONITOR1
MONITOR21
4
7
2
5
8
0
TEXT SEQ SHIFT
COPYDISK SELECT
EL-ZOOM