Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

61
•Even if preset to 30 or 15 FPS, the actual recording rate
may drop to 7.5 FPS at worst while busy multi task such
as playback, remote-access playback, remote-access
live image, FTP access, multi-split display, or video
motion detection are carried out simultaneously.
The status display will indicate  *→ PLAY while playing
back the images recorded with a rate different from the
preset.
•The suffix xxx following SP- is specified in REC
MODE TABLE in the ADDENDUM attached to the man-
ual.
1. Select a...

62
Camera Recording Setup (REC
CAMERA SETUP)
Click CAMERA REC SETUP in the system setup window to
open the menu.
This menu is provided for the purpose of saving disk
space. Each camera channel can be recorded only when
an alarm operates, while it will not be recorded in non-alarm
status.
ALARM-ONLY:Records the camera channel only
when the alarm operates.
REC:Records the camera channel regardless of alarm
or non-alarm status.
Manual Recording Setup 
(REC SETUP)
Manual recording will take effect when OFF...

63
TYPE2 12H:Time and date are displayed in two lines in
the AM-PM system.
OFF:Time & date display is disabled.
8Time and Date Position (TIME&DATE POSITION)
Right-Lower:Displays time & date in the lower right
corner.
Right-Upper:Displays time & date in the upper right
corner.
Left-Lower:Displays time & date in the lower left cor-
ner.
Left-Upper:Displays time & date in the upper left cor-
ner.
8Time & Date Embedded (TIME&DATE
EMBEDDED)
ON:The display will be embedded and recorded with
the image data....

64
Camera Title (CAMERA TITLE)
8On/Off (ON/OFF)
ON:Displays the camera title.
OFF:Hides the camera title.
8Title (TITLE)
Usable characters:Are shown in the window.
Number of digits:5 digits maximum.
8Title Position (POSITION)
Right-Lower:Displays the title in the lower right corner.
Right-Upper:Displays the title in the upper right cor-
ner.
Left-Lower:Displays the title in the lower left corner.
Left- Upper:Displays the title in the upper left corner.
Click the [SET] button when all items have been set...

65
Note: The recording rate may be sacrificed in the fol-
lowing cases.
•Recording and playback/FTP access are carried
out simultaneously.
•A multi-split screen is displayed.
•VMD (video motion detection) is enabled.
•A PC accesses the live images via the network.
8Alteration Detection (ALTER DETECT)
You can enable or disable the addition of alteration-
detection signals in the JPEG data supplied to the net-
work. The default is OFF.
ON:Detects alterations.
OFF:Does not detect.
Note:When set to ON, the...

66
Video Motion Detector Setup
(VMD SETUP)
8Sensitivity (SENSITIVE)
LOW:Low sensitivity
MID:Medium sensitivity
HIGH: High sensitivity
OFF:Motion detection is disabled.
Click the [SET] button when all items have been set proper-
ly.
Click the [SETUP] button to open the area setup window.
VMD Area Setup (VMD AREA
SETUP)
Drag a maximum of four areas with the mouse to specify
the detection areas.
Click the [SET] button when all items have been set proper-
ly.
Alarm Setup (ALARM SETUP)
8Alarm Buzzer (ALARM...

67
8Parity Check (PARITY CHECK)
NONE:No parity check
EVEN: Even parity
ODD:Odd parity
8Stop Bit (STOP BIT)
1 bit: 1 bit
2 bit:2 bits
8Wait Time (WAIT TIME)
OFF:Retransmission is disabled.
100 MSEC: 100 m seconds
200 MSEC:200 m seconds
1 SEC: 1 second
8Control Unit Addresses 
(CONTROL UNIT ADDRESS) (only for PS
•DATA)
Assignable address:From 1 to 99, must be unique in
the chain.
8System Unit Address (SYSTEM UNIT ADDRESS) 
(only for PS
•DATA)
Assignable addresses:From 1 to 99, must be unique
in the chain....

68
Camera System Setup
(CAMERA SYSTEM SETUP)
(only for PS
•DATA)
8Camera Number (CAMERA No.)
The camera number assigned to the port is used when
a system controller accesses the camera.
Assignable numbers:From 1 to 128, must be unique
in the chain.
8Compensation level (COMPENSATION)
Video signal loss can be compensated for the length of
the coaxial cable. S stand for short-distance, M for
medium, and L for long.
S: ≤500 m
M:500 m – 900 m
L:900 m – 1 200 m
8Data Communication (DATA)
ON:Enables data...

69
8Domain Name Service (DOMAIN NAME SERVICE)
OFF:Disables DNS, only IP address usable.
MANUAL:Enables DNS.
AUTO:Enables DNS.
Domain Name (DOMAIN NAME)
Enter from the keyboard.
DNS Server Address (DNS SERVICE ADDRESS)
Enter from the keyboard.
8Dynamic DNS (DYNAMIC DNS)
OFF:Does not use DDNS.
ON:Uses DDNS.
DDNS Host Name (DDNS HOST NAME)
Enter from the keyboard. 
DDNS User Name (DDNS USER NAME)
Enter from the keyboard. 
DDNS Password (DDNS PASSWORD)
Enter from the keyboard. 
DDNS Access Interval (DDNS...

70
Switcher Setup (SWITCHER
SETUP)
This window specifies sequence setups only for the WJ-
HD220. The browsers sequence is set up in LIVE
SEQUENCE SETUP on page 77.
8Common Setup (COMMON SETUP)
Multiscreen monitor Start Display (START DISPLAY
(MULTI))
Spot monitor Start Display (START DISPLAY
(SPOT))
The image in the selected form will be displayed on the
multiscreen monitor and spot monitor when the unit is
turned on.
Single image:CH 1 – CH 8*
Quad image:QUAD-4A (including 1-4), QUAD-4B
(including 5-8)...