Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

71
Multi Sequence Setup (MULTI
SEQUENCE SETUP)
8Camera Channel (CAMERA CH)
1 - 8:The selected camera image will be displayed in
single spot mode.
QUAD 4A: Camera images 1 through 4 will be dis-
played in quad-split mode.
QUAD 4B:Camera images 5 through 8 will be dis-
played in quad-split mode.
8Time (TIME)
Available times:2-30 S
Click the [SET] button when all items have been set proper-
ly.
Spot Sequence Setup (SPOT
SEQUENCE SETUP)
8Camera Channel (CAMERA CH)
1 - 8:The selected camera image will be...

72
System Information (SYSTEM
INFORMATION)
8HDD Hour Meter (HDD HOUR METER) 
Each meter shows how many hours the digital hard disk
recorder has been operated in playback, recording and
idle. The built-in HDD needs replacement when the
hour meter reads around 30 000 H. 
8HDD Capacity (HDD CAPACITY)
The total usable capacity of the built-in hard disk is indi-
cated.
8Resolution (RESOLUTION)
The selected resolution is displayed.
NORMAL:Normal resolution
SIF:Source Image Format (lower than NORMAL)
8System...

73
System Log (SYSTEM LOG)
Error causes are abbreviated as shown at the top of the
window.
Error Information on Network
Connections 
(ERROR INFORMATION (FTP,
SMTP, DDNS))
Up to 100 errors are displayed. The list is updated by dis-
carding old records when new events arise. 
Refer to Appendix Network Error Information for details. 

74
User Setup (USER SETUP)
A maximum of 16 users can be registered.
8User Authorization (USER AUTHORIZATION)
OFF:Allows free access.
ON: Verifies the password and access level for a maxi-
mum of sixteen users.
Click the [SET] button.
8User Name (USER NAME)
Enter from the keyboard. The default is admin.
8Password (PASSWORD)
Enter from the keyboard. The default is admin.
8Access Level (ACCESS LEVEL)
The default is [1].
[1] ADMINISTRATOR:Allows access to the setup
parameters, live and playback images.
[2]...

75
Interval (INTERVAL)
Available times: 1 - 1 440 seconds, 1 - 1 440 min-
utes
Channel to Send (CHANNEL TO SEND)
OFF:Does not send the channel image.
ON:Sends the channel image.
Click the [SET] button when all items have been set proper-
ly.FTP Client Setup (FTP CLIENT
SETUP)
8Basic Setup (BASIC SETUP)
Server Address (SERVER ADDRESS)
Enter the server address.
Login User Name (LOGIN USER NAME)
Enter the user name.
Login Password (LOGIN PASSWORD)
Enter the password.
Mode (MODE)
Available modes:SEQUENTIAL,...

76
Mail Setup (MAIL SETUP)
8Alarm Mail Setup (ALARM MAIL SETUP)
Sending Mail (SEND MAIL)
OFF: Does not send.
ON: Sends an e-mail to a maximum of four recipi-
ents when an alarm operates.
Attaching Alarm Image (ATTACH ALARM IMAGE)
OFF:Does not attach.
ON:Attaches the image of the alarmed channel to
the mail.
SMTP Server Address (SMTP SERVER ADDRESS)
Enter the SMTP server name or its IP address where
you wish to send a mail. The SMTP server name can be
used only when DNS is set to “AUTO” or “MANUAL”....

77
Network Video Setup
(NETWORK VIDEO SETUP)
8Live & Playback Image Setup (LIVE & PLAY
IMAGE SETUP)
Video Rate (VIDEO RATE)
Applicable rates: FAST, MIDDLE, SLOW, VERY
SLOW 
Click the [SET] button.
8Live Sequence Setup (LIVE SEQUENCE SETUP)
Use Sequence (USE SEQUENCE)
OFF: Does not run the sequence.
ON: Runs the sequence.
Auto Skip (AUTO SKIP)
OFF: Displays any step where no video is input as
a blackout screen.
ON: Skips any step where no video is input.
Camera Channel (CAM CH)
Available channels: CH1 -...

78
qMain Control Panel Tab
Opens the main control panel.
wAlarm List Tab
Opens the alarm list. 
eNetwork Status Display
LIVE, LIVE SEQ, PLAY, REV PLAY, >> (FF), 

79
@4Add Favorite Button (ADD FAVORITE)
Registers the IP address (or URL when using DDNS) to
the favorite of the browser.
@5Recording Button (REC)
Starts recording.
@6Recording Stop Button (REC STOP)
Stops recording. oStart Button (START)
While playing back, clicking this button will specify the
start point for downloading.
!0Start Time Display Area
Displays the start time of the recorded image that you
are to download.
!1End Button (END)
While playing back, clicking this button will specify the
end...

80
Main Control Panel8Camera Selection Button (Camera Select) 
Click any of the buttons. 
The selected camera channel will be displayed in the
image area.
8Multiscreen Selection Button (Multiscreen Select)
Clicking the button displays the respective multiscreen.
8Live Sequence Button (LIVE SEQUENCE)
Clicking the [LIVE SEQUENCE] button runs a series of
live images in the preset sequence and for the preset
display time.
8Alarm Reset Button (ALARM RESET)
The activated alarm event is reset.
8Time & Date...