Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

91
Command Table
Basic Operation
Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII)
Fast Forward to the end OFF OFF
Pause OPA OPA
Play OPL OPL
Recording ORC ORC
Rewind to the top ORW ORW
Skip&Play Forward OSF:n OSF n=0F Normal speed
n=1F x2 speed
n=2F x5 speed
n=3F x50 speed
n=5F x100 speed
n=0S Normal speed
n=1S 1/2 speed
n=+ Increment
n=– Decrement
Stop OSP:n OSP n=P stops PLAY
n=R stops REC
no parameter stops PLAY and REC
Skip&Play Rewind OSR:n OSR Refer to OSF.
Forward a field OVF...

92
Setup Control
Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII)
Cursor Moves DCR:n1n2 DCR n1=A Right
n1=C Upward
n1=E Left
n1=G Downward
n2=1 Move a step
n2=2 Move multi steps
n1n2=PD Move to lower layer
n1n2=P+ Move to upper layer
n1n2=P- Turn a newer page
n1n2=PU Turn an older page
Key Lock MKL:n MKL n=0 Lock OFF
n=1 Lock ON
Recording Event  MRM:n MRM n=0 Normal recording
Setupn=1 Internal timer recording
n=2 External timer recording
Summer Time Setup MST:n MST n=0 Standard time...

93
Media Control
Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII)
Disk End Notice Setup MDE:n MDE n=0 End is not notified
n=1 End is notified
Disk End Notice HDE
Inquiry
Item Transmission Command (ASCII) Response (ASCII) Parameter (ASCII)
Remaining Size  QHR QHR:nnn nnn=000-100 Decimal %
Inquiry
ID Inquiry QID QID:WJ-HD220
Key Lock Status  QKM QKM:n n=0 Lock OFF
Inquiryn=1 Lock ON
Alarm Info Inquiry QLD:n QLD:n (Alarm Information)In Transmission command:
n=0 Event report
n=1 Date&time...

94
HDD Maintenance
When to Maintain HDD
HDD maintenance is required in the following cases.
•When FULL indicator lights up
•When ERROR indicator lights up
•When an optional hard disk is added
•When you wish to format the HDD or to remove link
•When HDD reaches its life time (around 30 000 hours,
displayed in the SYSTEM INFO window)
 2 seconds later
       DISK MENU
NO.1:XXX.XXGB
NO.2:XXX.XXGB
REMOVE LINK
→   SET→HDD FORMAT →   SET→RESTART    →   SET→
SYSTEM CHECK
     
HDD ERROR
SYSTEM CHECK DONE!
TO...

95
When Error Indicator is Lit
Refer to your dealer for servicing when this happens.
8HDD Check
The recorder checks the hard disk when the recorder is
turned on, or when the HDD CHECK time specified in
the menu setup comes during operation. 
The recorder warns you of any error detected as fol-
lows.
Error indicator blinks.
Warning Out terminal on the rear panel turns active.
HDD ERROR will appear when there is no disk installed in
the recorder.
When this happens, turn off the power. New disk(s) should...

96
You can implement any of the following operations as necessary.
REMOVE LINK: Logically removes the HDD link.
HDD FORMAT: Formats the HDD.
RESTART: Closes the menu, and restarts the recorder.
The menu can also be displayed manually when you need to format the HDD or remove the logical link.
1. Turn off the power of the recorder once, and turn it on again. 
The multiscreen monitor displays the message SYSTEM CHECK DONE! TO OPEN DISK MENU, PUSH STOP KEY.
2. Press the [STOP] button.
The DISK MENU opens....

97
8Formatting HDD (HDD FORMAT)
This command initializes the HDD format and is applic-
able to HDDs of *, ERR, or ADD status.
Caution:Formatting is an irreversible procedure. We
strongly recommend that, before formatting, you
either save the recorded data into the server via the
network, or you save the data on VCR tapes via the
REC OUT terminal.
1. Display the DISK MENU window.
2. Move the cursor to HDD FORMAT, and press the
JogDial.
The password prompt appears.
3. Enter the ALL password using the CAM...

98
5. Select YES or NO rotating the JogDial, and press the
JogDial.
YES: Carries out formatting. Wait until the process
ends.
When YESis selected, the display will turn to NOW
FORMATTING. It will change to HDD FORMAT →SET
DONE when formatting is completed.
When the [STOP] button is pressed, the window returns
to that of step 1.
Select RESTART to return to normal operation.
8Restarting (RESTART)
This command closes the DISK MENU, and returns to
normal operation.
1. Display the DISK MENU.
2. Move the...

99
Mail Contents
The recorder sends e-mails to the specified addresses
when SEND MAIL is set to ON. An e-mail contains the fol-
lowing information.
Alarm Notice Mail
A JPEG image file with an HTML file will be sent when specified to attach.
WJ-HD220 (Sender IP Address) STATUS REPORT
DATE:           Jan31.03  00:00:00
PORT:           nCH
URL: http://Sender IP address:Port Number/
Note:URL is displayed when DDNS is applied. The port number except 80 is displayed.
Error Notice Mail
WJ-HD220 (Sender IP...

100
Network Security
WJ-HD220 Security Function
Host/User Authentication
Access can be limited by setting the authentication function to ON in the menu setup. 
Note: Be sure to change the password from the default setting admin to your own. 
Changing the HTTP Port Number
Changing the port number will limit unauthorized accesses such as port scanning.
For More Security 
Using Routers
Authentication is doubled by use of routers: divid-
ing into subnet, and verifying IP addresses by the
recorder and the...