Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

81
8Camera Control View Button (CAMERA
CONTROL VIEW)
The camera control buttons appear on the bottom of the
screen when you click the [CAMERA CONTROL VIEW] but-
ton. These buttons enable you to adjust images of combi-
nation cameras.
ZOOM (WIDE/TELE)buttons zoom the image in or out.
FOCUS (FAR/NEAR/AUTO)buttons adjust the focus of
the image. When AUTO is clicked, the camera will
adjust the focus by itself.
IRIS (CLOSE/OPEN/RESET)buttons adjust the iris of
the image. When RESET is clicked, the iris will...

82
Alarm List
Clicking the alarm list tab on the main control panel opens
the list.
Alarm events are listed with event numbers, dates, channel
numbers, and event types.
Click a line to play back the recorded image of the event.
CH SORTrearranges the listing order to start with the
camera channel you specified. The listing will be sorted
by date and time if ALL is specified.
PREVbutton returns the list page to previous one.
NEXTbutton opens the next page.
Alarm List Searchbutton opens the search dialog....

83
HTTP Download and Viewing
Images
When accessing the WJ-HD220 from the browser, and the
[DOWNLOAD] button is clicked in playback, the image
data and viewer software are downloaded as an exe file to
your PC.
Frame No.:Indicates the frame number of the dis-
played image.
Date:Indicates the date when the image was recorded.
Speed:Indicates the playback speed.
OLDEST:Goes to the oldest frame of the record.
REW:Changes the reverse-playback speed by click-
ing.
REV PLAY:Starts playing back in descending...

84
Cannot search alarm image in the list Enter a date that is a little older than the
one you wish to search. 
Old image data are overwritten and
cannot be searched.
Old records were discarded. Specified date may be later.
DISK END MODE is set to CONTINUE.
Over 9 999 of alarm events arose. Slow image refreshment and/or slow
response to operations Remote operations are not accepted
while BUSY indicator is lit. When accessing via the network:Phenomenon
Power is not turned on.
Error message HDD ERROR is...

85
SPECIFICATIONS &
APPENDIX 

86
SPECIFICATIONS
General
Power Source Required: 120 V AC, 60 Hz
Power Consumption: 45 W
Ambient Operating Temperature: +5 °C - +45 °C (41 °F - 113 °F)
Ambient Operating Humidity: Less than 85 %
Dimensions: 420 mm (W) x 44 mm (H) x 350 mm (D)
16-9/16 (W) x 3-7/16 (H) x 13-3/4 (D)
Weight: 5.2 kg(11.4 lbs.)
Input
Video Input: 1.0 V[p-p]/75 ΩComposite video signal with 75 ΩAutomatic Termination / Looping
through (x8)
Audio Input:–10 dB 10 kΩunbalanced, RCA standard jack
Image Process
Compression System:...

87
STANDARD ACCESSORIES
Rack Mounting Bracket  ............................................................... 2 pcs.
Screw for Rack Mounting Bracket (M3x10) ................................. 6 pcs.
Absorber ...................................................................................... 4 pcs.
Sleeve .......................................................................................... 4 pcs.
Hard Disk Fixing Screw  ............................................................... 4 pcs.
Earth...

88
Item
SHIFT
SETUP
FUNCTION
Step playback REW Alarm record playback Setup menu display on/off
The top of the oldest record will be
accessed. Jump to oldest
UP
LR
UP
DOWNR
WV-CU360
APPENDIX
Remote Control from System Controller
A system controller having PS•Data capability can control the WJ-HD220. The table compares operations of the WJ-HD220
and of the system controller WV-CU360. Make certain that the protocol selection for the WJ-HD220 is set to PS
•Data.
Setup item selection
Parameter selection...

89
WJ-HD220
Daylight saving
OFF, INT or EXT selectable Item WV-CU360 Note
DST
SHIFT
SETUP
FUNCTION3 1
Timer REC mode
SHIFT
SETUP
FUNCTION
SHIFT
SETUP
FUNCTION9 1
Button lock off
Enter your password.
Button lock on
SHIFT
SETUP
FUNCTION31
SHIFT
SETUP
FUNCTION30
Status display on/offOSD
LOCK
Multiscreen pattern 
selection
Multiscreen monitorMULTISCREEN
SELECT
ZOOM
MULTI SCREEN SELECT
SPOT
MULTI
MON
ESC
Spot monitor
SPOT
MULTI
MON
ESC
Camera selection18
CAM
SETNum
Button
PUSH–   PAUSESET//
Alarm reset
Alarm...

90
RS-232C Communication Protocol
The following pages detail the elements for communication between the Digital Disk Recorder and the personal computer. Be
sure to select RS-232C for PROTOCOL in the COMMUNICATION SETUP window. For BAUD RATE, DATA BIT and PARITY set-
tings, refer to COMMUNICATION SETUP. For cable connection refer to RS-232C CONNECTION.
1. Transmission Command
The PC sends messages to the Recorder in the format shown below. Also refer to the command table shown later.
[p] stands for...