Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

							51
Lock/Unlock Buttons
Password Verification
When a locked button is pressed, the key locked warning
appears on the monitor for 2 seconds, then it changes to
the password prompt.
1. Enter your five-digit password using the [CAM SELECT]
buttons (1-8). The buzzer shortly beeps once, and the
entered digit changes from – to  *  on the monitor.
2. The prompt window will display KEY UNLOCKED! for
2 seconds, and the buzzer beeps twice if the correct
password is entered. 
The monitor returns to the previous display. The
recorder allows access to the front panel controls if a
button operation takes place within 5 minutes of pass-
word entry.
3. Retry verification when password error appears on the
monitor.
The recorder will exit from verification if there is no opera-
tion within 30 seconds.
   PASSWORD 
/-----
Enabling Button Lock
1. You need to register passwords in the SYSTEM SETUP
window prior to operating your system.
2. Press the [LOCK] button for 2 seconds.
The buzzer shortly beeps twice, and the LED in the but-
ton lights up. The KEY LOCKED DONE! message
appears on the monitor.
Note:Set PASSWORD LOCK to OFF if you do not want
the recorder to revert to button lock mode when no
operation takes place within 5 minutes.
       KEY LOCK DONE!LOCK 
						

							52 
						

							53
WJ-HD200
NETWORK OPERATION 
						

							54
System Requirements
Your personal computer must meet the following minimum requirements.
OS:
One of the following operating systems: 
Windows98 Second Edition
Windows2000
Windows Millennium Edition
WindowsXP Professional or Home Edition
Browser:
One of the following browser software: 
Microsoft Internet Explorer 5.5SP2, 6.0 
Note:The Netscape browsers are not applicable.
Display:
1 024 x 768 pixels or more
Trademarks
Microsoft, Windows, WindowsXP and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United
States of America and/or other countries.
PREPARATIONS 
						

							55
Connection
System connection examples are shown.

•Connection with a Client PC via Hub

A maximum of four PCs can access the recorder at a time.
WV-CL920
Digital Disk Recorder
Camera
Personal Computer
Ethernet Cross CableOPERATEALARM
SUSPEND
RESETHDDFULLERROROSDMULTISCREEN
SELECTZOOM
TIMER
REMOTE
LOCKSEQUENCEALARM
SERCHSTOP
PLAY MODE SELECT
SETUP
/ESCPLAYTIME&DATE
SEARCHREC STOPSPOT
MULTICAMERA SELECTALARM
RECALLRECPUSH–    PAUSESET
Digital Disk Recorder WJ-HD2001
52
63
74
8DST
Super Dynamic
HubDigital Disk Recorder
Personal Computer Ethernet
Straigth
CableEthernet
Straigth
Cable Camera
OPERATEALARM
SUSPEND
RESETHDDFULLERROROSDMULTISCREEN
SELECTZOOM
TIMER
REMOTE
LOCKSEQUENCEALARM
SERCHSTOP
PLAY MODE SELECTSETUP
/ESCPLAYTIME&DATE
SEARCHREC STOPSPOT
MULTICAMERA SELECTALARM
RECALLRECPUSH–    PAUSESET
Digital Disk Recorder WJ-HD2001
52
63
74
8DST
LAN
HubHub
Digital Disk Recorder
WV-CL920WV-CL920
System 
Administrator
User User
User User Cameras 1-8
OPERATEALARM
SUSPEND
RESETHDDFULLERROROSDMULTISCREEN
SELECTZOOM
TIMER
REMOTE
LOCKSEQUENCEALARM
SERCHSTOP
PLAY MODE SELECT
SETUP
/ESCPLAYTIME&DATE
SEARCHREC STOPSPOT
MULTICAMERA SELECTALARM
RECALLRECPUSH–    PAUSESET
Digital Disk Recorder WJ-HD2001
52
63
74
8DST 
						

							56
Main Page and Control Panel
Start your PC WWW browser. Type http://192.168.0.10/ (or
the IP Address set for WJ-HD200) / in the URL (
Uniform
Resource Locators) space.
The browser displays the 
MAIN CONTROL PANELof the
WJ-HD200 homepage as shown in the figure.
Notes:
•Specify http//:192.168.0.10/ when a client PC is con-
nected alone.
•Specify http//: (IP address previously set for the WJ-
HD200)/ such as a LAN connection.
•A maximum of four PCs can access the recorder at a
time.
About Picture Quality
Picture quality transferred via the network depends on the recorders status as follows.
Recorder Status Displayed Quality
Timer recording Preset recording quality
Pre-alarm period Preset alarm recording quality
Except pre-alarm period Preset manual recording quality
Playback Recorded quality on the disk 
						

							57
To Access Setup Menus
There are fourteen setup menus to adapt the WJ-HD200 to
your requirements.
1. On the 
Main Control Panel, click the [SETUP MENU]
button. The setup menu opens.
2. Click the buttons to open the respective windows.

TIMER SETUP:
Specifies the schedule and parameters
for timer recordings.
REC SETUP:Specifies the parameters for manual and
alarm recordings.
EXT REC SETUP:Selects optional parameters to be
applied to the recording while the switch connected
externally to the EXT REC terminal turns on.
DISPLAY SETUP:Specifies time-and-date and other
displays of status information.
SYSTEM SETUP:Specifies password-protection, and
simultaneous REC&PLAY.
ALARM SETUP:Specifies alarm-related monitoring
mode, and VMD (video motion detector) mode.
COMMUNICATION SETUP:Specifies parameters for
serial and network communications.
SWITCHER SETUP:Specifies sequence and multi-split
patterns.
WJ-HD200 SETUP
SYSTEM INFORMATION:Displays various system
information.

USER SETUP:
Specifies users, passwords, and
access levels.
HOST SETUP:Specifies hosts and access levels.
FTP SETUP:Specifies parameters for transmitting files.
MAIL SETUP: Specifies senders, and receivers.
NETWORK VIDEO SETUP:Specifies application soft-
ware for video translation, and sequence steps.
3. To return to the 
MAIN CONTROL PANEL, click the
[Main Control Panel] tab or [BACK] button in the win-
dow.
Timer Setup (TIMER SETUP)
Timer Recording (TIMER REC)
OFF:Runs recording when manually operated, not
using any timer. Recording parameters are speci-
fied in the REC SETUP window.
INT:Runs recording with the programmed picture qual-
ity within the time zone scheduled on the internal
timer.
EXT:Runs recording when the externally connected
timer switch turns on and supplies power to the
recorder (Power-on recording). Recording parame-
ters are specified in the REC SETUP window.
Note:Buttons in the setup menus may appear with a
thicker border when using a browser in WindowsXP. 
						

							58
Program Assignment (TIMER REC)
When internal timer (INT) is selected, programs can be
assigned on a weekly and/or daily basis.
Assignable programs:PROG1 – PROG4, OFF
Programming (PROGRAM SETUP)
There are four programs, each containing four events hav-
ing a start and end time, and a recording mode.
1. Select ON or OFF for each event.
ON:Applies the schedule and mode to the program.
OFF:Does not apply.
2. Enter the start and end times.
Assignable START times:From 00:00 to 23:59
Assignable END times:From 00:01 to 24:00
3. Click the SET button.
4. Click the mode SETUP button. The PROG1-4 No.1-4
window opens.
Recording Mode Setup (PROG1-4
NO.1-4 SETUP)
Parameters for internal timer recording are assigned to
each event (NO.1-4) of the program (PROG1-4) in this win-
dow. There are five recording modes available: super fine
(SF), fine (FQ), normal (NQ), long-time (EX) and optional
(SP). If combined with audio recording (-A), the number of
recording modes doubles. The selected recording mode
determines the remaining recording time displayed on the
monitor.
In the SP mode, the field rate and picture quality are vari-
able, and can be selected at option in the range of 0.1 to
30 FPS with five quality level options respectively. After the
recording mode is selected, the available recording time is
determined and displayed.
N/A
Rec Mode Quality Audio Record Note
SF-xxxH Super Fine N/A
Field rate, quality
selected optionally Field rate, quality
selected optionally N/A
N/A
N/A
Available
Available
Available
Available Fine
Normal
Long time
Optional setup Super Fine
Fine
Normal
Long time FQ-xxxH
NQ-xxxH
EX-xxxH
SP-xxxHAvailable Optional setup SP-AxxxH SF-AxxxH
FQ-AxxxH
NQ-AxxxH
EX-AxxxH
Notes: 
•For recording modes other than SP, those suffixed xxx
in the table will be replaced by a calculated recording
time of 24, 48, 72, 96, 120, 170, 180, 240, 480, 960, 
1 200, 1 440, 2 160, 2 880, or 8 640 hours. The selected
recording mode with the preset rate and quality will
determine the suffix.
•Even if preset to 30 or 15 FPS, the actual recording rate
may drop to 7.5 FPS at worst while busy multi-tasks
task such as playback, remote-access playback,
remote-access live image, FTP access, multi-split dis-
play, or video motion detection are carried out simulta-
neously. 
						

							59
The status display will indicate  *→ PLAY while playing
back the images recorded with a rate different from the
preset.
•The suffix xxx following SP- is specified in REC
MODE TABLE in the ADDENDUM attached to the man-
ual.
1. Select a recording mode. Audio data will be recorded
when a mode with hyphen A is selected.
Available recording modes:SF, FQ, NQ, EX, SP, SF-
A, FQ-A, NQ-A, EX-A, and SP-A
2. When SP or SP-A is selected, specify a recording rate
(REC RATE).
Available recording rates:From 0.1 to 30 FPS
3. When SP or SP-A is selected, specify a recording quali-
ty (REC QUALITY).
Available recording qualities:SUPER FINE, FINE,
NORMAL, EXTENDED
8Alarm Recording Mode Setup (ALM REC MODE)
Recording of alarm events arising within the time zone
specified by the program will start with the preset parame-
ters.
Refer to PROG NO. SETUP described above for operating
procedures and available parameters, since they are very
similar.
8Pre-alarm Recording (PRE ALM REC)
Available times (seconds):0S, 1S, 2S, 3S, 4S, and 5S
8Post-alarm Recording (POST ALM REC)
Available times (seconds): 5, 10, 20, 30
Available times (minutes):1, 1.5, 2, 3, 6
Manual: Recording continues until the [REC STOP] but-
ton is pressed, or the RESET IN signal is supplied to
the rear panel.
Continue:Recording continues while the alarm input is
active, or at least for 10 seconds if the input turns
inactive earlier.
8Dynamic Recording (DYNAMIC REC)
ALM-MULTI:Alarm activated channels are recorded
with priority over others.
OFF:All channels are recorded with the same priority.
Trigger Action Setup (TRIGGER
ACTION SETUP)
8Mode (MODE)
OFF:Disables alarm recording, logging, or warning.
REC&ALARM:Enables all alarm recording, logging
and warning.
REC: Enables alarm recording and logging, but dis-
ables warning.
Click the [SET] button when items have been set properly.
Camera Recording Setup (REC
CAMERA SETUP)
Click CAMERA REC SETUP in the system setup window to
open the menu.
This menu is provided for the purpose of saving disk
space. Each camera channel can be recorded only when
an alarm operates, while it will not be recorded in non-alarm
status.
ALARM-ONLY:Records the camera channel only
when the alarm operates. 
						

							60
REC:Records the camera channel regardless of alarm
or non-alarm status.
Manual Recording Setup 
(REC SETUP)
Manual recording will take effect when OFF (not INT or EXT)
is selected in the Timer Mode Selection TIME REC window.
The parameters for alarm recording will be applied except
for the scheduled time zone if INT is selected.
Click the [REC SETUP] button on the setup control panel to
open the window.
Refer to 
Recording Mode Setup PROG1-4 SETUP, NO. 1-
4 for operating procedures and available parameters.
Externally Specified Recording
Mode (EXT REC SETUP)
This window specifies the recording mode and parameters
that will be changed when the switch externally connected
to the EXT REC terminal is turned on.
Refer to 
Recording Mode Setup PROG1-4 SETUP, NO. 1-
4, for operating procedures and available parameters.
Display Setup (DISPLAY SETUP)
Time and date display and other displays of status informa-
tion are specified in this window.
8Clock Setup (CLOCK SETUP)
Select a month, and type a day, year, hour, and minute.
8Time and Date type (TIME&DATE)
TYPE1 24H:Time and date are displayed in one line in
the 24-hour system.
TYPE1 12H: Time and date are displayed in one line in
the AM-PM system.
TYPE2 24H:Time and date are displayed in two lines in
the 24-hour system.
TYPE2 12H:Time and date are displayed in two lines in
the AM-PM system.
8Time and Date Display (TIME&DATE DISPLAY)
ON:Time & date display is enabled. 
OFF:Time & date display is disabled.
8Time and Date Position (TIME&DATE POSITION)
Right-Lower:Displays time & date in the lower right
corner.
Right-Upper:Displays time & date in the upper right
corner.
Left-Lower:Displays time & date in the lower left cor-
ner.
Left-Upper:Displays time & date in the upper left cor-
ner.