Panasonic Digital Color Imaging Systems For Copier Dp C266 Operating Instructions

							81
 Chapter 2    More Menus Features
„Text / Number
The original can be copied with text and page/issue numbers printed.
zPage numbers are printed in -n- (number) format. 
zPage and issue numbers can be entered from 001 to 999. After 999, the number returns to 001. 
zUp to 32 characters, including A to Z, a to z, 0 to 9, symbols, @, . (Period), _ and space can be entered for text 
stamp.
zThe font size is 2.1 mm x 3.1 mm.
1Select “Text / Number”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
74).
2Select the Orientation of the original.
3Select the Stamp Position.
4Select “Change”.
Ex: When copying text and page numbers
Select for the original in portrait 
orientation.
Select for the original in landscape 
orientation.
The text and page/issue 
number are printed on the 
bottom at the center.
The text and page/issue 
number are printed on the 
bottom right side.
The text and page/issue 
number are printed on the 
upper right side.
Continued on the next page... 
						

							82
 Chapter 2    More Menus Features
5Enter text, and then select “OK”.
zUp to 32 characters can be entered.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) of provided CD-ROM.
6Select “Page” or “Issue”.
7Enter the Starting Number, and then 
select “OK”.
8Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 74). 
						

							83
 Chapter 2    More Menus Features
Centering
The copying image can be centered automatically on a selected paper.
zThis function can be selected when the original is placed on the Platen Glass.
zAs the original is placed on the Platen Glass, the position of the original may be erroneously detected if 
influenced by ambient light.
zIf the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy 
image may be unclear.
1Open the ADF more than 45 degrees, 
and place original on the Platen Glass, 
and then leave the ADF open.
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Centering”.
5Select the desired type of paper, and 
then select “OK”.
6Enter the desired number of copies.
7Press the Start key.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode. 
						

							84
 Chapter 2    More Menus Features
Image Repeat
Create multiple images on a sheet from a single original.
zDotted lines can be printed between each of the copied images. Refer to Copier Settings in the Operating 
Instructions (For Function Parameters) of provided CD-ROM.
zThis function can be selected when the original is placed on the Platen Glass.
zAs the original is placed on the Platen Glass, the position of the original may be erroneously detected if 
influenced by ambient light.
zIf the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy 
image may be unclear.
1Open the ADF more than 45 degrees, 
and place original on the Platen Glass, 
and then leave the ADF open.
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Image Repeat”.
5Select the desired type of paper, and 
then select “OK”.
6Enter the desired number of copies.
7Press the Start key.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode.
The minimum size of the 
original is 20 mm x 20 mm. 
						

							85
 Chapter 2    More Menus Features
Copying Inverse Image
The tonal inversion of image can be copied in black and white.
zThis function is only available when “Black” is selected in the Color mode. If the “Inverse” is selected when the 
other Color mode has been set, a message appears prompting you to change the setting to “Black”.
zThis function is canceled if the Color mode is changed from “Black” to the other Color mode after selecting 
“Inverse”.
zThe Color mode remains set to “Black” even if the Inverse mode is canceled. To cancel the “Black” mode, 
select other Color mode or press the Reset key.
1Place original(s).
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Inverse”.
5Enter the desired number of copies.
6Press the Start key.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode. 
						

							86
 Chapter 2    More Menus Features
Inser tion Modes
Adding a Cover Page to Copies
The original can be copied using other types of paper for a cover page. Only the Front cover, or Front 
and Back covers can be selected.
1Place original(s) on the ADF.
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Insertion / Overlay”, and then 
select “Cover”.
The front cover is copied 
on color paper. 
						

							87
 Chapter 2    More Menus Features
5Select the Front, or Front and Back 
covers.
6Select “Cover” until the desired Paper 
Tray is displayed.
zWhen changing paper for copies other than 
the cover page, select “Copy”, and change 
the Paper Tray.
zWhen using color or Special paper for the 
cover page, place the paper in the Sheet 
Bypass or any tray beforehand, and also 
select the type of paper that you will use. If 
the type of paper is not selected properly, 
the quality of the image may become poor. 
Refer to the Operating Instructions (For 
Maintenance) of provided CD-ROM.
7Select “OK”.
8Enter the desired number of copies.
9Press the Start key.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode.
Front 
BlankSelect to add a Blank 
Front cover.
Front 
CopySelect to add a copied 
Front cover.
Front+Back
BlankSelect to add a Blank 
Front and Back cover.
Front+Back
CopySelect to add a copied 
Front and Back cover. 
						

							88
 Chapter 2    More Menus Features
Inserting Blank/Copied Pages Between Copies
The original can be copied by inserting other types of paper between specified pages.
You can copy specified pages (including the cover page) on paper such as colored paper set in a 
Paper Tray or on the Sheet Bypass.
1Place original(s) on the ADF.
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Insertion / Overlay”, and then 
select “Page Insertion”.
5Select the type of page to insert.
6Select “Page Insert” until the desired 
Paper Tray is displayed.
zWhen changing paper for copies other than 
the inserted page, select “Copy”, and 
change the Paper Tray.
zWhen using color paper for the inserted 
page, place the paper in the Sheet Bypass 
beforehand, and also select the type of 
paper that you will use. If the type of paper is 
not selected properly, the quality of the 
image may become poor. Refer to the 
Operating Instructions (For Maintenance) of 
provided CD-ROM.
1
2
3
4
5
61
2
3
4
5
61
2
3
4
5
6
Blank Pages Copied Pages
BlankInserts blank pages.
CopyInserts copied pages. 
						

							89
 Chapter 2    More Menus Features
7Select “OK”.
8Enter the page numbers with Keypad 
where the insertion pages are placed.
zTo erase an entered number, press the 
Clear key.
9Select   to enter the following 
page numbers where the insertion 
pages are placed.
zBy selecting   and  , move 
the cursor to enter the insertion page 
numbers.zUp to 20 insertion page numbers can be 
entered.
10Select “OK”.
11Enter the desired number of copies.
12Press the Start key.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode. 
						

							90
 Chapter 2    More Menus Features
Inserting Blank Pages Between Transparency Films
1Place original(s) on the ADF.
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Place the Transparency Films on the 
Sheet Bypass.
zHow to use the Sheet Bypass and change 
the Printing Media, refer to Adding Paper 
 in the Operating 
Instructions (For Maintenance) of provided 
CD-ROM.
5Select “Insertion / Overlay”, and then 
select “Transparency Interleaving”.
6When changing the paper to be 
inserted between Transparency Films, 
select “Page Insert” until the desired 
Paper Tray is displayed.
7Select “OK”.
8Enter the desired number of copies.
9Press the Start key.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode.