Panasonic Digital Color Imaging Systems For Copier Dp C266 Operating Instructions

							41
 Chapter 1    Basic Menu Features
Memo 
						

							42
 Chapter 2    More Menus Features
Chapter 2
Mor e Menus F eatur es
2-Sided Copy Mode
zThe standard setting of “2-Sided / Original->Copy” can be changed. Refer to Copier Settings in the 
Operating Instructions (For Function Parameters) of provided CD-ROM.
zSpecial papers such as cardboard cannot be used for the 2-Sided copy.
Basic Operation for the 2-Sided Copy Mode
1Place original(s).
zRefer to Placing Originals (see page 6).
zFor “2 -> 1”, “2 -> 2”, “Booklet”, “Multi-Size 
Feed”, and “Job Build and SADF”, place 
originals on the ADF. 
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select the desired 2-Sided mode.
1 -> 1 :  Clears the 2-Sided copy mode.
1 -> 2 :  (see page 43)
2 -> 1 :  (see page 44)
2 -> 2 :  (see page 45)
2 Page :  (see page 46)
Book -> 2 : (see page 47) 
N in 1 :  (see page 49)
Booklet :  (see page 52)
Multi-Size Feed: (see page 55)
Job Build and SADF: (see pages 58 to 59)
zWhen “Multi-Size Feed” is selected, 
“2Page”, “Book -> 2”, “N in 1” and 
“Booklet” cannot be selected.
5Enter the desired number of copies.
6Press the Start key.
zWhen copying from the Platen Glass, place 
the next original, and follow the instructions 
described on the Touch Panel Display.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode. 
						

							43
 Chapter 2    More Menus Features
Copying 1-Sided Originals onto 2-Sided Sheets
Two 1-sided originals can be copied onto one 2-sided sheet. The 1st original’s image is copied onto the 
front side and the 2nd original’s image is copied onto the back side of the sheet.
1Select “2-Sided / Original->Copy”, 
and then select “1 -> 2”. 
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 42).
2Select the Orientation of the original.
3Select the bind position, and then 
select “OK”.
zWhen setting “Edge” or “Margin” in the 2-
Sided copy mode, the printing position may 
differ on each side of the paper. Refer to 
Effect Modes (see page 68).
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42).
Select for the original in 
portrait orientation. 
Select for the original in 
landscape orientation.
Long Edge:
Copies both sides of 
original aligning to the long 
edge of the original.
Short Edge:
Copies both sides of 
original aligning to the short 
edge of the original. 
						

							44
 Chapter 2    More Menus Features
Copying 2-Sided Original(s) onto Two Separate Sheets
2-sided original(s) can be copied as separated into two 1-sided pages.
1Select “2-Sided / Original->Copy”, 
and then select “2 -> 1”.
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 42).
2Select the bind position, and then 
select “OK”.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42).
Long Edge:
Copies both sides of 
original aligning to the long 
edge of the original.
Short Edge:
Copies both sides of 
original aligning to the short 
edge of the original. 
						

							45
 Chapter 2    More Menus Features
Copying 2-Sided Original onto 2-Sided Sheet
2-sided original can be copied onto 2-sided sheet (same as the original). 
1Select “2-Sided / Original->Copy”, 
and then select “2 -> 2”. 
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 42).
2Select the Orientation of the original.
3Select the bind position, and then 
select “OK”.
zWhen setting “Edge” or “Margin” in the 2-
Sided copy mode, the printing position may 
differ on each side of the paper. Refer to 
Effect Modes (see page 68).
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42).
Select for the original in 
portrait orientation. 
Select for the original in 
landscape orientation.
Long Edge -> Long Edge:
Copies both sides of 
original aligning to the long 
edge of the original.
Long Edge -> Short Edge:
Copies both sides of long-
edge aligned original, 
aligning to the short edge of 
the original.
Short Edge -> Long Edge:
Copies both sides of short-
edge aligned original, 
aligning to the long edge of 
the original.
Short Edge -> Short Edge:
Copies both sides of 
original aligning to the short 
edge of the original. 
						

							46
 Chapter 2    More Menus Features
Copying Facing Page Original onto Two Separate Sheets
Facing pages or a 11” x 17” size original can be copied as separated into two 1-sided sheets.
1Select “2-Sided / Original->Copy”, 
and then select “2 Page”.
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 42).
zWhen “Multi-Size Feed” is selected, “2 
Page” cannot be selected.
2Select the Page Order of the original.
3Select the copy layout, and then select 
“OK”.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42).
The left page of the facing pages is 
copied first.
The right page of the facing pages 
is copied first.
The first through last page are 
copied.
The first page and beyond are 
copied, but the last page is not 
copied.
The first page is not copied, but the 
rest including the last page is 
copied.
The first and the last page are not 
copied. 
						

							47
 Chapter 2    More Menus Features
Copying Facing Page Original onto a 2-Sided Sheet
Facing pages or an 11 x 17 size original can be copied as separated into one 2-sided sheet.
1Select “2-Sided / Original->Copy”, 
and then select “Book -> 2”. 
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 42).
zWhen “Multi-Size Feed” is selected, “Book 
-> 2” cannot be selected.
2Select the Book Format.
3Select the Orientation of the original.
4Select the Page Order of the original.
1st Page 2nd Page 1st Page 2nd Page
The first page of the original is copied 
onto the front page of a sheet, and 
the second page is copied onto the 
back side of the same sheet.
A blank page is copied onto the 
front page of a sheet, and the first 
page of the original is copied onto 
the back side of the same sheet. 
Select for the original in landscape 
orientation. 
Select for the original in portrait 
orientation. 
The left page of the facing pages is 
copied first.
The right page of the facing pages 
is copied first.
Continued on the next page... 
						

							48
 Chapter 2    More Menus Features
5Select the Copy Format, and then 
select “OK”.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42). 
The first through last page are 
copied.
The first page and beyond are 
copied, but the last page is not 
copied.
The first page is not copied, but the 
rest including the last page is 
copied.
The first and last page are not 
copied. 
						

							49
 Chapter 2    More Menus Features
Copying Multiple Pages onto a Single Sheet (N in 1 Copy)
Multiple pages (2, 4 or 6 sheets) can be copied onto a single sheet. The images of originals are 
reduced to fit into the size of the copy paper.
1Select “2-Sided / Original->Copy”, 
and then select “N in 1”. 
zTo display this screen, refer to steps 1 to 3 of 
Basic Operation for the 2-Sided Copy 
Mode (see page 42).
zWhen “Multi-Size Feed” is selected, “N in 
1” cannot be selected.
2Select the N in 1 mode.
123
56 4
64
531
23
12
4 3
1
2
4 4
1
4 32
A
6 4
5 3 1
26 4
5 3 12
A
B
C3 2 1
ABC

2 in 1 Copy 
2 in 1 Copy 4 in 1 Copy 
4 in 1 Copy 6 in 1 Copy
6 in 1 Copy
2 in 1:
Copies 2 originals onto 1 
sheet. 
4 in 1:
Copies 4 originals onto 1 
sheet. 
6 in 1:
Copies 6 originals onto 1 
sheet. 
Continued on the next page... 
						

							50
 Chapter 2    More Menus Features
3Select the Orientation of the original.
4Select the desired copy mode.
‰When 1 -> 2, 2 -> 1 or 2 -> 2 is selected
Select the bind position of the original, and 
then select “OK”.
Ex: When 1 -> 2 is selected for “2 in 1”
When 2 -> 2 is selected, select the bind 
position for the copy, and then select “OK”.
Ex: When 2 -> 2 is selected for “2 in 1”
zWhen “2 in 1” or “6 in 1” is selected, the 
orientation of original and copy will be 
different.
Select for the original in portrait 
orientation. 
Select for the original in landscape 
orientation.
1 -> 1:
1-Sided Original to 1-Sided Copy
1 -> 2:
1-Sided Original to 2-Sided Copy
2 -> 1:
2-Sided Original to 1-Sided Copy
2 -> 2:
2-Sided Original to 2-Sided Copy
Long Edge:
Copies both sides of 
original aligning to the long 
edge of the original.
Short Edge:
Copies both sides of 
original aligning to the short 
edge of the original.