Panasonic Digital Color Imaging Systems For Copier Dp C266 Operating Instructions

Digital Color Imaging Systems
Operating Instructions
Before operating this machine, please carefully read this manual
and keep this documentation in a safe place for future reference.
(Illustration shows optional accessories that may not be installed on y\
our machine.)
English
(For Copier)
Model No. DP-C406 / C306 / C266 

2
     
Operating Instructions
The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manual 
and keep all manuals for future reference. If you lose the manual, contact the authorized Panasonic dealer.
AccessoriesQuick Reference Guide
Describes the basic procedures for each function, and 
introduces various settings for Copy function.
Operating Instructions (For Basic)
Describes the overview of this machine.
For a detailed explanation of functions,...

3
     
Conventions
Icons
The following icons are used in this manual.
Notation
The following notations are used in this manual.
IconDescription
Indicates important information that must be read in detail. 
Indicates reference information.
NotationDescription
For Keys and Buttons Hard buttons on the Control Panel are depicted as **** key, and soft buttons on the Touch 
Panel Display are depicted as “xxx”.
Ex:
Press the Start key and select “More Menus”. 

4
     
Table of Contents
Chapter 1 Basic Menu Features
Placing Originals.................................................................................................................. 6
How to Place Originals .................................................................................................... 6
Basic Operation Procedure ................................................................................................. 8
Copying with Preset Ratios (Reduction/Enlargement)...

5
     
Copying Facing Page Original onto Two Separate Sheets ............................... “2 Page”46
Copying Facing Page Original onto a 2-Sided Sheet ....................................“Book -> 2”47
Copying Multiple Pages onto a Single Sheet (N in 1 Copy) ................................ “N in 1”49
Copying Originals with Saddle-Stitch Binding (Booklet) ...................................“Booklet”52
Copying Mixed Size Originals from the ADF .......................................“Multi-Size Feed”55...

6
 Chapter 1    Basic Menu Features
Chapter 1
Bas i c Menu F eatur es
Placing Originals
How to Place Originals
zOn the ADF
Acceptable Paper Type
Original Size:A3, B4, A4, A4-R, A5, A5-R, FLS (8 x 13, 8.5 x 13), 5.5 x 8.5 (Invoice), 
5.5 x 8.5 (Invoice-R), 8.5 x 11 (Letter), 8.5 x 11 (Letter-R), 8.5 x 14 (Legal), 
11 x 17 (Ledger)
Paper Weight:1 sided: 50-105 g/m
2 (14-28 lb)
2 sided: 64-105 g/m2 (18-28 lb)
Notice for ADF
Do not use the following type / flawed originals.
z
Drawing papers, Transparencies,...

7
 Chapter 1    Basic Menu Features
Notice for Platen Glass
Align the original to the top left corner mark ( ).
zIf the original is not positioned properly, a portion of the 
original may not be copied.
zFor originals smaller than 5.5 x 8.5 (Invoice) size, 
position the original within the 5.5 x 8.5 area and select 
5.5 x 8.5.
Original Orientation
Ex:5.5 x 8.5
For Book -> 2 Copy
Ex:When copying 5.5 x 8.5 sized book, align the center of 
the book with the “5.5” indication.
Copying a thick booklet
zIf...

8
 Chapter 1    Basic Menu Features
Basic Operation Procedure
The machine automatically detects original(s) and decides on the Copy Size and Color mode to use. If 
the detection fails, manually set the settings.
1Place original(s).
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select the required settings if 
necessary.
zThe original size is detected and a 
corresponding Copy Size is automatically 
selected.
zWhen the desired size of paper...

9
 Chapter 1    Basic Menu Features
4Enter the desired number of copies.
(Up to 999)
zWhen inputting a number (4 to 8 digits) with 
the optional Fax Communication Board 
installed, the machine automatically 
interprets it as a telephone number, 
switches to the Fax mode, and displays the 
Number Pad screen.
zThe number of digits interpreted as a fax 
number can be set from 4 to 8 digits in the 
Function Parameter “118 Fax Function 
Detect” (Fax/Email Settings > Fax 
Parameters). For more details, refer...

10
 Chapter 1    Basic Menu Features
Copying with Preset Ratios (Reduction/
Enlargement)
You can easily enlarge or reduce the copy size by selecting the preset size with the Copy Size buttons.
zTo change the assigned paper size of Copy Size buttons, select “Paper/Output Tray” and modify the settings. 
For setting the paper size and media type for Paper Trays, refer to General Settings (Key Operator Mode) in 
the Operating Instructions (For Function Parameters) of provided CD-ROM.
1Place original(s) in...