Panasonic Digital Color Imaging Systems For Copier Dp C266 Operating Instructions

51
 Chapter 2    More Menus Features
5Select the Layout format, and then 
select “OK”.
‰When 2 in 1 is selected
‰When 4 in 1 is selected
‰When 6 in 1 is selected
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42). 

52
 Chapter 2    More Menus Features
Copying Originals with Saddle-Stitch Binding (Booklet)
zOriginals should be placed on the ADF. (5.5 x 8.5 or 8.5 x 11 size is only available, up to 60 originals)
zSaddle-stitch binding is possible only when the optional 1Bin Saddle-Stitch Finisher (DA-FS405W) is installed.
Ledger (11 x 17), Legal (8.5 x 14), and Letter-R (8.5 x 11) are the only applicable paper sizes (legal size 
can be selected only when printing from computer).
zThe standard setting for the copy...

53
 Chapter 2    More Menus Features
‰When “2 Sided” is selected
Select the bind position of the original, and 
then select “OK”.
3Select the bind position for the copy.
4Select the cover page type if 
necessary.
Select “Cover”.
Select the cover type.
zWhen “Blank” is selected for the cover type, 
up to 56 originals can be placed on the ADF.
Select “Cover” to select a paper.
zWhen changing paper for copies other than 
the cover, select “Copy”. If the paper of 
desired size is available on the tray, the...

54
 Chapter 2    More Menus Features
5Select “OK” to exit the cover settings.
6Select “OK”.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42).
zWhen the fold position does not match with 
the center position of the copies, set the 
binding margin. Refer to General Settings 
in the Operating Instructions (For Function 
Parameters) of provided CD-ROM.
zThe stapled copies are delivered to the 
Saddle Tray of the 1Bin Saddle-Stitch 
Finisher as...

55
 Chapter 2    More Menus Features
Copying Mixed Size Originals from the ADF
Use this function when copying mixed size originals (8.5 x 11 and 11 x 17, or 5.5 x 8.5, 8.5 x 
11-R, and 8.5 x 14 (Legal)). Using the ADF, original size can be detected automatically and copied in 
the same size or the specified size.
zWhen copying in the 2-Sided mode
zIf no copy size is specified, the original is copied in the original size. If the copy size is specified, the original is 
copied automatically enlarged or...

56
 Chapter 2    More Menus Features
3Select the desired copy mode, and 
then select “OK”.
‰When 1 -> 2, 2 -> 1 or 2 -> 2 is selected
Select the Orientation of the original.
Select the bind position of the original, and 
then select “OK”.
Ex: When 1 ->2 is selectedWhen all originals are 
vertically long 
Ex:
When the smaller original is 
vertically long, and the 
larger original is horizontally 
long
Ex:
When the smaller original is 
horizontally long, and the 
larger original is vertically 
long
Ex:...

57
 Chapter 2    More Menus Features
When 2 ->2 is selected , select “Change” and 
select the bind position for the copy, and then 
select “OK”.
4When copying the same paper size, 
select “Basic Menu”, and then select 
a desired copy size with the Copy Size 
buttons.
zFor the following procedure, refer to steps 5 
to 6 of Basic Operation for the 2-Sided 
Copy Mode (see page 42).
Short Edge:
Copies both sides of the 
larger original aligning to 
the short edge of the 
original.Ex:Combination of Letter...

58
 Chapter 2    More Menus Features
Copying Special Originals (Thin Paper, etc.) from the ADF
„SADF
This mode adds a 5-second delay to allow another original to be placed on the ADF. Special originals 
(thin paper, etc.) can be fed from the ADF and copied continuously using the SADF mode. 
1Place one original (minimum 50 g/m2
/ 14 lb) on the ADF. 
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “2-Sided / Original->Copy”, 
and then select “Job Build and...

59
 Chapter 2    More Menus Features
„Job Build
This is useful for copying multiple sets of originals that exceed the maximum capacity of the ADF of 
100 sheets (20 lb/Letter). (See the example below.)
Ex: To make 5 sets of sorted copies of 115-sheet of originals.
(a) Place the first 100 sheets of originals on the ADF.
(b) Select “2-Sided / Original->Copy”, and then select “Job Build and SADF”.
(c) Select “Sort / Finish”, and then select the desired Sorting/Finishing end result.
(d) Enter 5 for the...

60
 Chapter 2    More Menus Features
Sor t Mode
The original can be copied, printed, and sorted in a specified number of sets.
The following Finishing modes are available when the optional Finisher and Punch Unit are installed.
zOnly 8.5 x 11 (Letter/Letter-R) size is applicable for “Rotate-Sort” and “Rotate-Group”. When “Rotate-Sort” 
or “Rotate-Group” is selected with Letter and Letter-R size paper loaded in the paper tray, sets of copies are 
stacked in alternate direction (rotation of 90 degrees)....