Panasonic Digital Color Imaging Systems For Copier Dp C266 Operating Instructions

31
 Chapter 1    Basic Menu Features
Sharpness
The original can be copied by softening or sharpening the outline of the image.
1Select “Sharpness”.
zTo display this screen, refer to step 1 of 
Background Removal (see page 27).
2Adjust the sharpness with “Lower” or 
“Higher”, and then select “OK”.
zThe screen will return to step 1. 
Select “OK”, and then proceed to steps 6 to 
8 of Quality Adjusting (see page 26).
Lower
Higher
LowerEach time it is selected, the 
sharpness level decreases by 
1 grade...

32
 Chapter 1    Basic Menu Features
Saturation
The original can be copied with the adjusted saturation.
1Select “Saturation”.
zTo display this screen, refer to step 1 of 
Background Removal (see page 27).
2Adjust the saturation with “Lower” or 
“Higher”, and then select “OK”.
zThe screen will return to step 1. 
Select “OK”, and then proceed to steps 6 to 
8 of Quality Adjusting (see page 26).
Higher Lower
LowerEach time it is selected, the 
saturation level decreases by 1 
grade lower, reducing the...

33
 Chapter 1    Basic Menu Features
Color Balance
The original can be copied with the adjusted density level (Darker, Medium, and Lighter) of Yellow, 
Magenta, Cyan, and Black.
zThe density of each color can be fine tuned for each of the three density levels.
This function is useful for the fine adjustment of color photos. Unlike image editing software, this function 
cannot greatly change the color tone since the adjustable range at each density level is very narrow.
1Select “Color Balance”.
zTo...

34
 Chapter 1    Basic Menu Features
Proof Copying
When making more than one copy, the first copy can be printed as a proof copy.
After confirming its quality, the remaining copies can be printed.
1Place original(s).
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select the copy features if necessary.
4Enter the desired number of copies.
5Select “Proof Set”.
6Press the Start key.
The first copy is printed and the Confirmation 
screen...

35
 Chapter 1    Basic Menu Features
Confir ming/Editing the Selected Copy 
Features
Before copying, the settings of “More Menus” can be checked, changed, and deleted.
1Select “Confirm Settings”.
2Check the settings, and then select 
“Close”.
zIf “Confirm Settings” is selected, the setting 
screen is displayed and the settings (except 
1 -> 1) can be changed.
zIf “Reset All” is selected, all the settings are 
canceled.
zIf “Preset Jobs” is selected, the job 
registration screen is displayed to register...

36
 Chapter 1    Basic Menu Features
Storing a Job in Memor y
A copy job can be registered as a preset job. It is useful to register the frequently used settings as 
Preset Jobs.
zRefer to Recalling a Preset Job Stored in Memory (see page 37).
zOnce registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
zA Proof Copy job cannot be registered in the job memory. 
z“M1:”/“M2:” cannot be registered when the Manual Skyshot mode is selected. Refer to Copier...

37
 Chapter 1    Basic Menu Features
Recalling a Preset Job Stored in Memor y
The specific copy job will be done by recalling the registered preset jobs.
zRefer to Storing a Job in Memory (see page 36).
1Place original(s).
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select “Preset Jobs”.
4Select a stored job.
zJob buttons without names, indicate that 
jobs are not registered.
zIf the Confirmation screen “Ready for M 1 
Memory Copy” is...

38
 Chapter 1    Basic Menu Features
Checking the Waiting to Copy Job
A list of jobs currently being printed or waiting to print can be displayed. The following types of jobs can 
be displayed.
• All jobs
•Copy jobs
Waiting to print jobs can be deleted.
Displaying a List of All Jobs
A list of all the jobs currently being printed or 
waiting to print can be displayed.
1Press the Copy key if the machine is 
set to other function mode.
2Select “Output Queue”.
The Output Queue screen is displayed, and a...

39
 Chapter 1    Basic Menu Features
Deleting Copy Jobs
The jobs in the Ready status can be deleted.
1Select “Copy” in the Output Queue 
screen.
zTo display the Output Queue screen, refer to 
Checking the Waiting to Copy Job (see 
page 38).
2Select a job, and then select “Delete”.
zWhen deleting all jobs, select “Select All”, 
and then select “Delete”.
The screen to confirm the job deletion is 
displayed.
3Select “Yes”.
The selected Copy job is deleted.
4Select “Close”.
CopySelect when deleting a copy...

40
 Chapter 1    Basic Menu Features
Completion Notice
If the Completion Notice is set, you will be notified on your computer when copying is completed.
zBefore using this function, install the Panasonic Document Management System and Printer Driver, and 
then configure each software.
zTo register the IP Address of your computer, refer to Network Scanner Settings and Completion Notice 
Function in the Operating Instructions (For User Setup) of provided CD-ROM.
1Place original(s).
zRefer to Placing...