Panasonic Digital Color Imaging Systems For Copier Dp C266 Operating Instructions

71
 Chapter 2    More Menus Features
Shifting Image to Right, Left, Up, or Down
The margin can be added on any 4 sides of the image with the image shifted to the right, left, up, or 
down accordingly.
zIf a part of the copied image is missing, change the Margin Reduction setting to “Ye s”. Refer to Copier 
Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
zWhen “Overlay” or “Form Overlay” is selected, the binding margin is also set for the overlay original.
zIf this...

72
 Chapter 2    More Menus Features
5Select the desired position of the 
binding margin.
6Enter the width of the binding margin 
with “S” and “T”, or the Keypad, and 
then select “OK”.
zThe width of the binding margin can be set 
in 1 mm increments from 5 mm to 99 mm.
7Enter the desired number of copies.
8Press the Start key.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode.
Select to set the binding margin on 
the left side of the paper....

73
 Chapter 2    More Menus Features
Copying Mirror Image
The laterally reversed image of original can be copied.
1Place original(s).
zRefer to Placing Originals (see page 6).
2Press the Copy key if the machine is 
set to other function mode.
3Select “More Menus”.
4Select “Zoom / Effects”, and then 
select “Mirror”.
5Enter the desired number of copies.
6Press the Start key.
zAfter finishing copying, press the Reset key to 
return to the initial screen of the currently active 
mode. 

74
 Chapter 2    More Menus Features
Copying with Stamping
Page Number or Date, etc. can be stamped on each sheet.
zThis function can be selected when the original is placed on the ADF.
zOnly one kind of stamp can be selected from Page Number, Issue Number, Date, and Text / Number for each 
scan job.
zStamped only in black.
zNo stamp is printed on a blank page when an odd number of originals is copied with “1 -> 2” selected.
„Basic Operation for Stamping
1Place original(s) on the ADF.
zRefer to Placing...

75
 Chapter 2    More Menus Features
„Page Number
The original can be copied with page numbers printed.
zThe default is -n- (number) format. To change to n/m (number/maximum) format, refer to Copier Settings in 
the Operating Instructions (For Function Parameters) of provided CD-ROM.
zMake sure to select “Sort”.
1Select “Page Number”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
74).
2Select the Orientation of the original.
3Select the Stamp Position.
4To...

76
 Chapter 2    More Menus Features
5If “Change” was selected in step 4, 
select the Starting Page.
6If “Change” was selected in step 4, 
enter the Starting Number with “S” 
and “T”, or the Keypad, and then 
select “OK”.
zStarting page number can be set from 1 to 
999.
7Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in Basic Operation for Stamping (see 
page 74).
The page numbering starts from 
the first page.
The page numbering starts from 
the second page.
The page numbering starts from...

77
 Chapter 2    More Menus Features
„Issue Number
The original can be copied with consecutive numbers from 001 to 999 printed.
zThe Issue Numbers can be set from 001 to 999. After 999, the number returns to 001.
1Select “Issue Number”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
74).
2Select the Orientation of the original.
3Select the Stamp Position.
Select for the original in portrait 
orientation.
Select for the original in landscape 
orientation.
The...

78
 Chapter 2    More Menus Features
4Enter the Starting Number with “S” 
and “T”, or the Keypad, and then 
select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 74).
Each time it is selected, the number 
increments by 1.
Each time it is selected, the number 
declines by 1. 

79
 Chapter 2    More Menus Features
„Date
The original can be copied with a date printed. The date is printed in the MM/DD/YYYY format.
1Select “Date”.
zTo display this screen, refer to steps 1 to 4 of 
Basic Operation for Stamping (see page 
74).
2Select the Orientation of the original.
3Select the Stamp Position.
4To change the date, follow the steps 
below.
Select “Change”.
The cursor is displayed.
01/01/2009 01/01/2009
Select for the original in portrait 
orientation.
Select for the original in...

80
 Chapter 2    More Menus Features
Move the cursor to the desired position using 
 and  .
Change the date with the Keypad.
5Select “OK”.
zFor the following steps, refer to steps 5 to 6 
in the Basic Operation for Stamping (see 
page 74).