Panasonic Digital Camera Dmc Zs45 Owners Manual For Advanced Features

							- 141 -
Wi-Fi
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [New Connection], and then press [MENU/SET].
3Press  3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [PC], and then press [MENU/SET].
5Press [MENU/SET].
•For details on the connection methods, refer to  P146.
6Press  3/4  to select the PC you want to connect to, and then press [MENU/ SET].
•When the PC you want to connect to is not displayed, select [Ma nual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
7Press  3/4  to select the destinations folder of the PC, and then press [M ENU/SET].
8Check the send setting, and then press [MENU/SET].
•To change the send setting, press [DISP.]. (P152)
9Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P126)
•Folders sorted by the sent date are created in the specified fo lder, and pictures are saved in those 
folders.
•If the screen for a user account and password entry appears, en ter the one you set on your PC.
•When the computer name (NetBIOS name for Apple Mac computers) c ontains a space (blank 
character), etc., it may not be recognized correctly.
If a connection attempt fails, we recommend that you change the  computer name (or NetBIOS 
name) to the one consisting of only alphanumeric characters, wi th a maximum of 15 characters.
Sending selected images ([Send Images Stored in the Camera])
[SINGLE] setting
1 Press  2/1 to select the picture.
2 Press [MENU/SET].
[MULTI] setting
1 Press  3/4/ 2/1 to select the picture, and then press 
[DISP.]. (repeat this step)
•
The setting is canceled when [DISP.] is pressed again.
2 Press [MENU/SET].
•The number of pictures that can be sent by [MULTI] is 
limited.
•Confirmation screen is displayed. It is executed when [Yes] is  selected.
46
2
31
5 
						

							- 142 -
Wi-Fi
To transfer images automatically ([Smart Transfer])
Smart Transfer is a function that automatically transfers images in the camera to a PC.
The transfer starts when you connect the camera to the AC adaptor (supplied).
•
When [Auto Transfer] is set to [ON], the camera automatically u ploads recorded images. For this 
reason images may be uploaded unintentionally if, for example,  you share this unit with other 
people.
Panasonic assumes no responsibility for any damages caused by u ploaded images.
•Panasonic assumes no responsibility for any damages caused by the use of [Smart Transfer].
•When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to  [ON], and 
turn off the camera because electromagnetic waves, etc. emitted  by the camera may interfere with 
gauges.  (P45)
•When a charging error occurs, Smart Transfer may not be perform ed. (P170)•Smart transfer is not available for images stored in the built- in memory.•[Smart Transfer] is not available when the memory card is locke d.
Example of [Auto Transfer]
AAC adaptor (supplied)
B USB connection cable (supplied)
C PC1 Set [Auto Transfer] to [ON]
2 Record
3 Charge
4 Start a transfer
To perform Smart Transfer, follow the steps below:
1Set up Smart Transfer (initial setup).  (P143)2Perform [Auto Transfer]. (P143)



 
						

							- 143 -
Wi-Fi
When using Smart Transfer for the first time, follow the steps below to set it up.
From the next time on, you can change the settings from [Set De stination] (P144).
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].  (P41)2Press  3/4  to select [Smart Transfer], and press [MENU/SET].
3Select the method for connecting to a wireless access point, an d set.
•Refer to P146 for details.
4Set the transfer destination.
•For details about the preparations before the transfer, refer t o “When sending images to PC” on 
P139 .
5Press  3/4  to select [Auto Transfer], and press [MENU/SET].6Press  3/4  to select [ON], and press [MENU/SET].
•Only the images you recorded when [Auto Transfer] is set to [ON ] is transferred.
You can transfer images while charging the camera.
Preparation:
Configure [Smart Transfer] in advance. (P143)
1Turn off the camera.2(When using a power outlet)
Connect the AC adaptor (supplied) and this camera with the USB  connection cable 
(supplied), and insert the AC adaptor (supplied) into the power  outlet.
(When using a PC)
Connect this unit to a PC by using the USB connection cable (su pplied).
•
Smart Transfer will start.
(When the remaining battery power is low, charging may be given  the priority.)
•Depending on the specifications of the PC, [Smart Transfer] may fail.
•If there are images that are not transferred when [Auto Transfer] is set to [OFF], the message that 
confirms whether to transfer these images is displayed. Select a desired option.
Configuring [Smart Transfer]
1Press  3/4 to select a PC you want to connect, and then press [MENU/SET].
2 Press  3/4 to select the folder you want to send, and then press [MENU/SE T].
Transferring automatically 
						

							- 144 -
Wi-Fi
Changing the transfer destination or settings of images.1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P41)
2Press  3/4  to select [Smart Transfer], and press [MENU/SET].3Press  3/4  to select [Set Destination], and press [MENU/SET].
4Press  3/4  to select the item, and press [MENU/SET].
You can check the date and details of transferred images.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].  (P41)2Press  3/4  to select [Smart Transfer], and press [MENU/SET].3Press  3/4  to select [Display Log], and press [MENU/SET].
•Dates and content of transferred images are displayed.
Exit the menu when you are done viewing.
[Set Destination]
ItemDescription of settings
[Destination] Changes the wireless access point to be connected.
Select the method for connecting to a wireless access point, an
d set.
•Refer to P146 for details.
[Size] Resizes the image to send.
[Original]/[Change]•You can select the picture size from [M] or [S] in [Change].
The aspect ratio does not change.
[Display Log] 
						

							- 145 -
Wi-Fi
About Connections
You can select a connection method after selecting a Wi-Fi function and a destination.
When connecting with the same settings as the previous ones, you can use the Wi-Fi function 
quickly by connecting via [History Connection] or  [Favorite Connection].
Connecting to a PC ([Via Network])  (P146)
Connects via a wireless access point.
Connecting to a smartphone/tablet ([Direct])  (P148)
Your device connects directly to this unit.
A Wireless access point
CancelOK
Via NetworkConnect to the
network (AP)
A
CancelOK
DirectConnect directly
to the destination 
						

							- 146 -
Wi-Fi
You can select the method for connecting to a wireless access 
point.
¢WPS refers to a function that allows you to easily configure th e 
settings related to the connection and security of wireless LAN  
devices.
To check if the wireless access point you are using is compatib le 
with WPS, refer to the manual of the wireless access point.
Connecting to a PC (via a network)
Connection methodDescription of settings
[WPS (Push-Button)] Save push button type wireless access point that is compatible 
with 
Wi-Fi Protected Setup
TM with a WPS mark.
Press the wireless access point WPS 
button until it switches to WPS Mode.
•
Refer to the wireless access point instruction 
manual for details. e.g.:
[WPS (PIN code)]Save PIN code type wireless access point that is compatible wit
h Wi-Fi 
Protected Setup with a WPS mark.
1Press  3/4  to select the wireless access point you are 
connecting to, and press [MENU/SET].
2Enter the PIN code displayed on the camera screen into 
the wireless access point.
3Press [MENU/SET].
•Refer to the wireless access point instruction manual for detai ls.
[From List]Select this option when you are not sure about the WPS compatib
ility, or 
when you want to search for and connect to a wireless access po int.•Refer to P147 for details.
CancelSelectSet
WPS (PIN code)
From ListWPS (Push-Button)
Select connection method
Use button on
WPSWPS button
the WPS device 
						

							- 147 -
Wi-Fi
Search for available wireless access points.
•Confirm encryption key of the selected wireless access point if the network authentication is 
encrypted.
•When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless 
access point you are using.
1Press  3/4  to select the wireless access point you are 
connecting to, and press [MENU/SET].
•
Pressing [DISP. ]  will search for a wireless access point again.•Wireless access points with non-alphanumeric characters may 
not be displayed correctly.
•If no wireless access point is found, refer to “When connecting 
with [Manual Input]” on  P147 .
2(If network authentication is encrypted)
Enter the encryption key.
•
For details on how to enter characters, refer to “Entering Text” section on  P90.
•A maximum of 64 characters can be entered.
∫When connecting with [Manual Input]1On the screen displayed in step 1 of “If you are not sure about the WPS 
compatibility (connecting by [From List])”, select [Manual Input] by pressing 3/ 4, 
then press [MENU/SET].
2Enter the SSID of the wireless access point you are connecting  to, then select [Set].
•For details on how to enter characters, refer to “Entering Text” section on  P90.•A maximum of 32 characters can be entered.
3Press  3/4  to select the network authentication type, and press [MENU/SET ].
•For information on network authentication, see the manual of th e wireless access point.
4Press 3/4  to select the encryption type, and press [MENU/SET].
•The type of settings that can be changed may vary depending on  the details of network 
authentication settings.
5(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
•
Check the wireless access points instruction manual and setting s when saving a wireless access 
point.
•If no connection can be established, the wireless access point’ s radio waves may be too weak.
Refer to 
“Message Display”  (P167)  and “Troubleshooting” (P170)  for details.•Transmission speed may decrease, or may not be usable depending  on the environment it is used 
in.
If you are not sure about the WPS compatibility (connecting by  [From List])
Network authentication typeEncryption types that can be set
[WPA2-PSK]/[WPA-PSK][TKIP]/[AES]
[Common Key][WEP]
[Open][No Encryption]/[WEP]
CancelSelectSet
Manual Input0123456ABCD-1 0123456ABCD
Select the destination (AP)
UpdateDISP. 
						

							- 148 -
Wi-Fi
You can directly connect your device and the camera.
Connecting to a smartphone/tablet (direct connection)
Connection methodDescription of settings
[Manual Connection]
Enter the SSID and password into the 
device. The SSID and password are 
displayed on the connection waiting 
screen of this unit.
•
You can also set up a connection by 
scanning a QR code with a smartphone. 
(P130, 131)
OKCancel
Manual ConnectionEnter SSID and
password
Cancel
Please scan the QR code using Image App,
or enter the password into Wi-Fi settingsPlease set on your smartphone
SSID: Password:  
						

							- 149 -
Wi-Fi
When the Wi-Fi function is used, a record is saved in the history. You can register records as 
favorites.
Connecting from the history or favorites allows you to easily connect with the same settings as 
the previous ones.
1Press [Wi-Fi].
2Press 3/4/2/1 to select [History Connection] 
or [Favorite Connection], and then press [MENU/
SET].
3Select the desired connection setting with  3/4, 
and then press [MENU/SET].
•If the smartphone is connected to a wireless access point 
other than the camera, it cannot connect to the camera.
Change the wireless access point to connect to in the Wi-Fi 
settings of the smartphone to the camera.
You can also select [New Connection] and reconnect the 
devices.  (P129)
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [History Connection], and then press [MENU/SET].3Select the item you want to register to favorites with 3 /4 , and then press  1.4Enter a registration name.
•For details on how to enter characters, refer to “Entering Text” section on  P90.•A maximum of 30 characters can be entered.
Connecting quickly with the same settings as the previous ones  ([History 
Connection]/[Favorite Connection])
[History Connection] Connects with the same settings as the previous ones.
[Favorite Connection]Connects with settings registered as favorites.
Registering records as favorites
CancelSelectSet
Wi-Fi
History
Connection
Wi-Fi
Setup
New
Connection
Favorite
Connection
CancelSelectSet
History Connection
Register to FavoriteDISP. 
						

							- 150 -
Wi-Fi
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [Favorite Connection], and then press [MENU/SET].
3Select the favorite item you want to edit with 3/ 4, and then press  1.4Press  3/4  to select the item, and press [MENU/SET].
•
Performing [Reset Wi-Fi Settings] clears the history and the co ntents saved in [Favorite Connection].•When connecting to a network to which many PCs are connected by  using [History Connection] or 
[Favorite Connection], a connection attempt may fail because th e previously-connected device will 
be identified from among many devices.
If a connection attempt fails, reconnect by using [New Connection].
Editing the items registered to favorites
ItemDescription of settings
[Remove from Favorite] —
[Change the Order in 
Favorite]Select the destination with 
3/4, and then press [MENU/SET].
[Change the Registered 
Name]•For details on how to enter characters, refer to “Entering Text” 
section on  P90.
•A maximum of 30 characters can be entered.
Save frequently-used Wi-Fi connection settings as favorites
The number that can be saved in the history is limited.
We recommend that you save frequently-used Wi-Fi connection set tings by registering them 
as favorites.  (P149)
Checking the connection detail of the history or favorite
If [DISP.] is pressed when selecting an item in the history or  favorites, the detail of the 
connection can be displayed.