Panasonic Digital Camera Dmc Zs45 Owners Manual For Advanced Features

							- 111 -
Playback/Editing
1Press 3/4  to select [Select Date] and then press [MENU/SET].2Press  3/4 /2/ 1 to select the date to be played back, 
and then press [MENU/SET].
•
If there were no pictures recor ded during a month, that month 
is not displayed.
•The recording date of the picture selected in the playback scre en becomes the date selected when 
the calendar screen is first displayed.
•You can display the calendar between January 2000 and December  2099.•If the date is not set in the camera, the recording date is set as January 1st, 2015.•If you take pictures after setting the travel destination in [World Time], the pictures are displayed by 
the dates at the travel destination in Calendar Playback.
You can play back pictures taken on each date
46/ .0/ 56& 8&% 5)6 3* 45


 
 
 

 
  

 




 
 






 
						

							- 112 -
Playback/Editing
You can search for images by recorded date.
•
The recording date of the picture selected in the playback screen becomes the date selected when 
the calendar screen is first displayed.
•You can display the calendar between January 2000 and December  2099.•If the date is not set in the camera, the recording date is set as January 1st, 2015.
•If you take pictures after setting the travel destination in [World Time], the pictures are displayed by 
the dates at the travel destination in Calendar Playback.
[Calendar]
1Press 3/ 4/2/1  to select the date you want to 
search.
2Press [MENU/SET] to display a list of pictures.
•Pictures are displayed with Multi Playback (30 screens).
The cursor appears on the picture at the beginning of the 
selected date.
3Press 3/ 4/2/1  to select a picture and then 
press [MENU/SET].
•To continue the search, return to the previous screen by 
rotating the zoom lever towards [W].  (P38)
46/.0/ 56& 8&% 5)6 3* 45


 
 
 

 
  

 




 
 







1/52 
						

							- 113 -
Playback/Editing
Having Fun with Recorded Pictures ([Creative Retouch])
You can add your desired effects to the pictures that you have taken.
•The processed pictures are newly generated, so be sure that you  have enough space in the built-in 
memory or on the card. Note also that processing will not be po ssible if the Write-Protect switch of 
the card is in the [LOCK] position.
•Effects may be difficult to see depending on the picture.
1Press 2/ 1 to select a picture, and then press 3 .
2Press 3/4 to select image effects and then press [MENU/SET].
•Image effects that are the same as the ones in Creative Control Mode can be added. 
(P83–87)
•A brief description of selected image effect appears when you p ress [DISP.].
•To set the color you want to keep by using [One Point Color], 
move the frame at the center of the screen to the desired 
color with 3/4/2 /1, and then press [MENU/SET].
•If you select [No Effect], an image with no effect is displayed .
To proceed the retouch operation, select another image 
effect.
If you are not going to add any effect, exit the menu.
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
∫ When selecting [Creative Retouch] from the [Playback] menu1Select [Creative Retouch] on the [Playback] menu.  (P41)2Press 2/1  to select a picture, and then press [MENU/SET].
3Press  3/4  to select image effects and then press [MENU/SET].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
•The image effect may appear weak compared to the effect given b y the Creative Control Mode.•The preview display and the image after the retouch operation may differ in the level of effects.•This function is not available in the following cases:
–Motion pictures–Pictures taken in Panorama Shot Mode 
						

							- 114 -
Playback/Editing
Using the [Playback] Menu
For details on [Playback] menu settings, refer to P41.
You can perform actions like cropp ing recorded pictures, as well as set up the protection of 
recorded images, etc.
•
With [Creative Retouch], [Text Stamp], [Resize] or [Cropping],  a new edited picture is created.
A new picture cannot be created if there is no free space on th e built-in memory or the card so we 
recommend checking that there is free space and then editing th e picture.
•Images recorded or edited with the camera may not be played bac k correctly on other devices and 
applied effects may not appear on the devices.
Also, images recorded on other devices may not be played back o n the camera and functions of the 
camera may not be available for the images.
The location information (longitude/latitude) acquired by the smartphone/tablet can be sent to 
the camera and written in images.
•
Pictures in the built-in memory cannot store location informati on.
If you want to record location information on them, copy the pi ctures in the built-in memory to a 
memory card, then perform [Location Logging].
Preparation:
Sending location information to the camera from the smartphone/ tablet. (P135)
1Select [Location Logging] on the [Playback] menu.
2Press 3/ 4 to select [Add Location Data] and then press [MENU/SET].
3Press 3/4 to select the period you intend to record location information  
on pictures, then press [MENU/SET].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
•Images with location information are indicated with [ ].
∫ To pause the recording of location information
Press [MENU/SET] while recording of the location information on to pictures is taking 
place.
•
During a suspended period, [ ±] is displayed.
Select the period with [ ±] to restart the recording process from the picture you left of f.
[Location Logging] 
						

							- 115 -
Playback/Editing
∫To delete the received location information
1Select [Location Logging] on the [Playback] menu.2Press  3/4  to select [Delete Location Data] and then press [MENU/SET].3Press  3/4  to select the period you want to delete, then press [MENU/SET].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
•This function is not availa ble in the following cases:–Images recorded after location information was sent to the came ra  (P135)–Motion pictures–Images with location information already written to them–Images protected by [Protect]–When there is insufficient space left on the card–When the Write-Protect switch to the card is set to the [LOCK] position–Images recorded with other devices
You can add text (comments) to pictures. After text has been re gistered, it can be stamped in 
prints using [Text Stamp]  (P116).
1Select [Title Edit] on the [Playback] menu.
2Press 3/ 4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
3Select the picture, and then press [MENU/SET] 
to set.
•[’] is displayed for pictures with titles already registered.
[MULTI] setting
Press [DISP.] to set (repeat), and then press [MENU/
SET] to set.
•
The setting is canceled when [DISP.] is pressed again.
4Enter the text.  (P90)
•Exit the menu after it is set.
•To delete the title, erase all the text in the text input scree n.•You can set up to 50 pictures at one time in [MULTI].•This function is not available in the following case:–Motion pictures
[Title Edit]
46
2
31
5 
						

							- 116 -
Playback/Editing
You can stamp recording dates/times and names on recorded pictu res.
1Select [Text Stamp] on the [Playback] menu.
2Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
3Select the picture, and then press [MENU/SET] 
to set.
•[‘ ] is displayed on pictures already with date or text 
stamped.
[MULTI] setting
Press [DISP.] to set (repeat), and then press [MENU/
SET] to set.
•
The setting is canceled when [DISP.] is pressed again.
4Press 3/ 4 to select [Set], and then press [MENU/SET].
5Press 3/4 to select text stamp items, and then press [MENU/SET].
6Press 3/4 to select the settings, and then press [MENU/SET].
[Text Stamp]
ItemDescription of settings
[Shooting Date] [W/O TIME]:
Stamp the year, month and day.
[WITH TIME]: Stamp the year, month, day, hour and minutes.
[OFF]
[Name] []:
Stamps names registered in name settings for 
[Baby1]/[Baby2] or [Pet] in Scene M ode.
[OFF]
[Title] [ON]:
Title input in the [Title Edit] will be stamped.
[OFF]
46
2
31
5 
						

							- 117 -
Playback/Editing
7Press [ ].
8Press 3 to select [OK], and then press [MENU/SET].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
Exit the menu after it is executed.
•When you print pictures stamped with text, the date will be pri nted over the stamped text if you 
specify printing of the date at the photo shop or on the printe r.
•You can set up to 50 pictures at one time in [MULTI].
•The picture quality may deteriorate when text stamping is carri ed out.•Depending on the printer being used, some characters may be cut  at printing. Check before printing.
•If you perform [Text Stamp] on an image larger than 3M, the picture size will be fixed to 3M (4:3), 
2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•When text is stamped onto the 0.3M pictures, it is difficult to  read it.
•This function is not available in the following cases:–Motion pictures–Pictures taken in Panorama Shot Mode
–Pictures recorded without setting the clock–Pictures with date or text stamped
You can add the effect of  [Creative Retouch] to recorded pictur es .
•
For details, refer to  P113.
[Creative Retouch] 
						

							- 118 -
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to divide 
a part you need with a part you do not need.
It cannot be restored once divided.
•
Motion pictures cannot be divided at a location close to the st art or end of the motion picture.
•The order of images will change if motion pictures are divided.
It is recommended to search these motion pictures by using [Cal endar] or [Video Only] in the 
[Filtering Play].
•Motion pictures with a short recording time cannot be divided.•You may not be able to divide a motion picture when there is in sufficient free space on the card.
[Video Divide]
1Select [Video Divide] on the [Playback] menu.
2Press 2/1 to select the motion picture to divide, and then press [MENU/
SET].
3Press 3 at the location to divide.
•Motion picture is played back from the same location when 
3  is pressed again.
•You can finely adjust the location for division by pressing  2/
1  while the motion picture is paused.
4Press 4.
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed wh ile processing the dividing.
03s03s03s 
						

							- 119 -
Playback/Editing
To allow easy posting to web pages, attachment to email etc., picture size (number of pixels) is 
reduced.
1Select [Resize] on the [Playback] menu.
2Press 3/ 4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.
•This function is not availa ble in the following cases:–Motion pictures–Pictures taken in Panorama Shot Mode
–Pictures with date or text stamped
[Resize]
3Select the picture and size.
[SINGLE] setting
1Press 2/1  to select the picture, and then press 
[MENU/SET].
2Press  2/1  to select the size, and then press 
[MENU/SET].
[MULTI] setting
1Press  3/4  to select the size, and then press 
[MENU/SET].
2Press  3/4 /2 /1 to select the picture, and then 
press [DISP.].
•
Repeat this step for each picture, and press [MENU/
SET] to set.
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
Exit the menu after it is executed.
3
46
2
31
5 
						

							- 120 -
Playback/Editing
You can enlarge and then clip the important part of the recorded picture.
1Select [Cropping] on the [Playback] menu.
2Press 2/1 to select the picture, and then press [MENU/SET].
3Use the zoom lever and press  3/4/2/1 to select the parts to be 
cropped.
4Press [MENU/SET].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
Exit the menu after it is executed.
•The picture quality of the cropped picture will deteriorate.
•Small size pictures may not be cropped.•This function is not availa ble in the following cases:–Motion pictures
–Pictures taken in Panorama Shot Mode–Pictures with date or text stamped
[Cropping]
Zoom lever (W): Reduction
Zoom lever (T): Enlargement
3/4/ 2/1:M ove