Panasonic Digital Camera Dmc Zs45 Owners Manual For Advanced Features

							- 131 -
Wi-Fi
When using an SSID and password to set up a connection1Turn on the Wi-Fi function in the setting menu of the smartphon e/tablet.
2 Select the SSID displayed on the screen of the camera.
3 Enter the password displayed on the screen of the camera.
(Only when connecting for the first time)
4Start “ Image App ”.  (P128)
If you are using an Android device
When scanning the QR code to set up a connection
1Start “ Image App ”.  (P128)
2 Select [QR code].
3 Using “ Image App ”, scan the QR code displayed on 
the screen of the camera.
Wi-Fi
0123456789ABC
Cancel
Please scan the QR code using Image App,
or enter the password into Wi-Fi settingsPlease set on your smartphone
SSID: Password:  
						

							- 132 -
Wi-Fi
∫Terminating the connection
After use, terminate the connection to the smartphone. Once tur ning off the connection, 
you can perform normal recording and playback.
1Press [ ].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
2On the smartphone, close “ Image App ”. When using an SSID and password to set up a connection
1Start “ Image App ”.  (P128)
•
If a message appears stating that a camera search is in progres s, close the message.
2Select [Wi-Fi].
3 Select the SSID displayed on the screen of the 
camera.
4 Enter the password displayed on the screen of the 
camera.
(Only when connecting for the first time)
•If you mark the box that enables the smartphone to display the  password, you can see 
the password as you enter it.
(If you are using an iOS device)
On the screen of “ Image App ”, press the home button to close th e app.
(If you are using an Android device)
On the screen of “ Image App ”, press the return button twice to  close the app.
Cancel
Please scan the QR code using Image App,
or enter the password into Wi-Fi settingsPlease set on your smartphone
SSID: Password:  
						

							- 133 -
Wi-Fi
1Connect to a smartphone. (P129)
2Operate the smartphone.
•
Remote recording is disabled in the following Recording Modes.  If you try to use it, the camera will 
switch to Program AE Mode.
–Panorama Shot Mode
–[Handheld Night Shot]/[HDR] (Scene Mode)•When you use the remote recording function, the camera’s controls other than the camera [ON/OFF] 
button and the [ ] button are disabled.
1Connect to a smartphone.  (P129)
2Operate the smartphone.
Taking pictures via a smartphone/tablet (remote recording)
1Select  [ ].
2 Operate the zoom to decide on the composition.
3 Release the shutter.
•
The recorded images are saved in the camera.•Motion pictures cannot be recorded.•Some settings are not available.
Playing back pictures in the camera
1Select  [ ].
•You can switch the images to be displayed 
by selecting the icon ( A
) on the top left of 
the screen. To display images stored in the 
camera, select [LUMIX].
2 Touch an image to enlarge it.
•Motion pictures cannot be played back.
A
 


 
						

							- 134 -
Wi-Fi
1Connect to a smartphone. (P129)
2Operate the smartphone.
Saving images stored in the camera
1Select  [ ].
•You can switch the images to be displayed 
by selecting the icon ( A
) on the top left of 
the screen. To display images stored in the 
camera, select [LUMIX].
2 Touch and hold an image, and drag it to 
save it.

 
						

							- 135 -
Wi-Fi
You can acquire location information from a smartphone, and write it on images afterwards.
•You can write location information sent from a smartphone on images by using [Location Logging] in 
the [Playback] menu of the camera.  (P114)
1Synchronize the times
2 Start recording location information
3 Start recording images
4 Finish recording the location information
5 Send the location information
6 Write the location information using [Location Logging] in the  [Playback] menu
∫ Operate the smartphone
1Connect to a smartphone.  (P129)2Select  [ ].
3Select [Geotagging].4Select an icon.
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when 
you use this function. Use at your own risk.
•If you have changed the clock setting of this unit or the smart phone after [Time sync], perform 
[Time sync] again.
•On the smartphone, you can set the acquisition interval of location information and check the 
transfer status of location information.
Refer to [Help] in the “ Image App ” menu for details.
Sending location information to the camera from a smartphone/ta blet
Starts/stops recording location information.•Before you start recording location information, perform [Time sync].
•The smartphone battery drains faster while location information is being recorded.
When recording of location information is not necessary, stop i t.
Sends location information.
•Follow the on-screen messages to operate the smartphone.





*36 
						

							- 136 -
Wi-Fi
∫Methods for sending and images that can be sent
•
Some images may not be played back or sent depending on the dev ice.
•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P151.
Click the followings to jump to the beginning of each menu.
Sending images to a smartphone/tablet by controlling the camera
JPEGMP4
Sending an image each time a recording is made
([Send Images While Recording]) ±
—
Sending selected images
( [Send Images Stored in the Camera]) ±±
Preparations
•
Install the “ Image App ” in advance. 
(P128)
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] ) P137
Sending selected images ([Send Images Stored in the Camera]) P138 
						

							- 137 -
Wi-Fi
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [New Connection], and then press [MENU/SET].
3Press  3/4  to select [Send Images While Recording], 
and then press [MENU/SET].
4Press  3/4  to select [Smartphone], and then press 
[MENU/SET].
5Press [MENU/SET].6Press [MENU/SET].
•For details on the connection methods, refer to  P130, 131 .
7Press  3/4  to select a device you want to connect, and then press [MENU/S ET].8Check the send setting, and then press [MENU/SET].
•To change the send setting, press [DISP.]. (P152)
9Take pictures.
•The pictures are sent automatically after taking them.
•To change the setting or disconnect, press [Wi-Fi].  (P126)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
•You cannot record motion pictures when the camera is connected  using [Send Images While 
Recording].
Sending an image each time a recording is made ([Send Images Wh ile Recording] )
CancelSelectSet
Send Images Stored in the CameraSend Images While RecordingRemote Shooting & ViewSelect a function 
						

							- 138 -
Wi-Fi
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [New Connection], and then press [MENU/SET].
3Press  3/4  to select [Send Images Stored in the 
Camera], and then press [MENU/SET].
4Press  3/4  to select [Smartphone], and then press 
[MENU/SET].
5Press [MENU/SET].6Press [MENU/SET].
•For details on the connection methods, refer to  P130, 131 .
7Press  3/4  to select a device you want to connect, and then press [MENU/S ET].8Check the send setting, and then press [MENU/SET].
•To change the send setting, press [DISP.]. (P152)
9Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P126)
Sending selected images ([Send Images Stored in the Camera])
[SINGLE] setting
1 Press  2/1 to select the picture.
2 Press [MENU/SET].
[MULTI] setting
1 Press  3/4/ 2/1 to select the picture, and then press 
[DISP.]. (repeat this step)
•
The setting is canceled when [DISP.] is pressed again.
2 Press [MENU/SET].
•The number of pictures that can be sent by [MULTI] is 
limited.
•Confirmation screen is displayed. It is executed when [Yes] is  selected.
CancelSelectSet
Send Images Stored in the CameraSend Images While RecordingRemote Shooting & ViewSelect a function
46
2
31
5 
						

							- 139 -
Wi-Fi
When sending images to PC
∫Methods for sending and images that can be sent
•
When you send a motion picture, w e recommend supplying power with the AC adaptor (supplied).•Some images may not be played back or sent depending on the dev ice.•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P151.
Click the followings to jump to the beginning of each menu. You can send pictures and motion pictures recorded with 
this unit to a PC.
You can also set this unit so that images on it are transferred  
automatically while it is being charged.
(Smart Transfer)  (P142)
JPEGMP4
Sending an image each time a recording is made
([Send Images While Recording]) ±
—
Sending selected images
([Send Images Stored in the Camera]) ±±
Preparations
(On the camera)
•
If the workgroup of the destination PC has been 
changed from the standard setting, you also 
need to change the setting of this unit in [PC 
Connection]. 
(P153)(On your PC)
•Turn the computer on.•Prepare folders for receiving images on the PC 
before sending a picture to the PC.  (P140)
Sending an image each time a recording is made ([Send Images Wh ile 
Recording] ) P140
Sending selected images ([Send Images Stored in the Camera]) P141 
						

							- 140 -
Wi-Fi
•Create a PC user account [account name (up to 254 characters) and password (up to 
32 characters)] consisting of alphanumeric characters.
An attempt to create a receive folder may fail if the account i ncludes non-alphanumeric characters.
•The name of a destination folder must consist of 20 or less alp hanumeric characters. 
(For Windows)
Supported OS: Windows VistaR/WindowsR 7/WindowsR 8/WindowsR 8.1
Example: Windows 7
1Select a folder you intend to use for receiving, then right-cli ck.2Select [Properties], then enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
(For Mac)
Supported OS: OS X v10.5 to v10.9
Example: OS X v10.8
1Select a folder you intend to use for receiving, then click on the items in the 
following order.
[File]   [Get Info]
2Enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then press [MENU/SET].
3Press  3/4 to select [Send Images While Recording], and 
then press [MENU/SET].
4Press  3/4  to select [PC], and then press [MENU/SET].
5Press [MENU/SET].
•For details on the connection methods, refer to  P146.
6Press  3/4  to select the PC you want to connect to, and 
then press [MENU/SET].
•
When the PC you want to connect to is not displayed, select 
[Manual Input], and enter the computer name of the PC (NetBIOS name for Apple Mac 
computers).
7Press  3/4  to select the destinations folder of the PC, and then press [M ENU/SET].8Check the send setting, and then press [MENU/SET].
•To change the send setting, press [DISP.]. (P152)
9Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P126)
You cannot change the settings while sending pictures. Wait unt il sending is complete.
•You cannot record motion pictures when the camera is connected  using [Send Images While 
Recording].
To create a folder that receives images
Sending an image each time a recording is made ([Send Images Wh ile Recording] )
CancelSelectSet
Send Images Stored in the CameraSend Images While RecordingRemote Shooting & ViewSelect a function