Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features

							Wi-Fi/NFC
Using WEB services
VQT5E74- 221 -
Through “LUMIX CLUB”, you can send still pictures and motion pictures to social 
networking services, etc. By selecting the setting to automatically transfer still pictures 
and motion pictures to [Cloud Sync. Service], you can receive the transferred still pictures 
and motion pictures on a PC or a smartphone.
You can make a setting so that pictures in the camera can be sent to a WEB service or 
cloud synchronization service automatically while the camera battery is charging. ([Smart 
Transfer] (→238))
Wireless access pointWEB services
Cloud 
synchronization 
services
LUMIX CLUB
See the part of the manual that applies to your objective. 
When sending images to WEB service (→222)
When sending images to [Cloud Sync. Service] (→227)    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 222 -
When sending images to WEB service
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending a picture each time one is recorded 
[Send Images While Recording] Yes No No No Yes
Sending selected pictures
[Send Images Stored in the Camera] Yes No Yes No Yes
 • Some images may not be played back or sent depending on the device. • For details about playback of pictures, check the WEB service to which you will send 
the pictures.
 • For more details about picture sending methods.  (→253)
Preparation:
Y

ou need to register to “LUMIX CLUB”  (→231) to send a picture to a WEB service.
When sending images to WEB services, such as Facebook or YouTube, the WEB 
service being used must be registered with the “LUMIX CLUB”. Registering multiple WEB 
services will send images to all services simultaneously. (→224)
See the part of the manual that applies to your objective.
Sending a picture each time one is recorded ([Send Images While Recording]) 
(→225)
Sending selected pictures ([Send Images Stored in the Camera]) (→226)    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 223 -
 ●Images uploaded to the WEB service cannot be displayed or deleted with this camera. 
Check images by accessing the WEB service with your smartphone or computer .
 ●If sending images fails, a report email outlining the failure will be sent to the email 
address registered with “LUMIX CLUB”.
 ●Images may contain personal information that can be used to identify the user , 
such as a title, the time and date when the images were taken, and the location 
where the image was taken. Check this information before uploading images to 
WEB services.
 ●Panasonic assumes no responsibility for the damages resulting from the leakage, 
loss, etc. of images uploaded on WEB services.
 ●When uploading images to the WEB service, do not delete images from this 
camera, even after they have finished sending, until you have checked that 
they have been properly uploaded to the WEB service. Panasonic assumes no 
responsibility for the damages resulting from the deletion of images stored in this 
unit.    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 224 -
 ■Using WEB services
When sending images to WEB services, such as Facebook or YouTube, the WEB 
service being used must be registered with the “LUMIX CLUB”. Registering multiple 
WEB services will send images to all services simultaneously.
 • Check the “F
 AQ/Contact us” on the following site for compatible WEB services.  
http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation:
Make sure that you have created an account on the WEB service you want to use, and 
have the login information available.
Connect to the “LUMIX CLUB” site using a smartphone or 
computer
http://lumixclub.panasonic.net/eng/c/
Enter your “LUMIX CLUB” login ID and password and log in to 
the service 
(→231)
Register your email address
Select the WEB service to be used and register it
 • Follow the instructions on the screen to register the service.    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 225 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [Web service], and then press 
[MENU/SET]
Select [Via Network] and connect (→246)
Select a WEB service you want to connect
 • When the connection is complete, the screen is displayed.  To change the send 
setting, press [DISP.] button.  (→254)
Take still pictures
 • To change the setting or disconnect, press [Wi-Fi] button.  (→186)
You cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 226 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Web service], and then press 
[MENU/SET]
Select [Via Network] and connect (→246)
Select a WEB service you want to connect
 • When the connection is complete, the screen is displayed.  To change the send 
setting, press [DISP.] button.  (→254)
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→186)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MUL
TI] is limited.
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 227 -
When sending images to [Cloud Sync. Service]
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending a picture each time one is recorded 
[Send Images While Recording] Yes No No No Yes
Sending selected pictures
[Send Images Stored in the Camera] Yes No Yes No Yes
 • Some images may not be played back or sent depending on the device. • See the operating instructions of the destination device for more information about 
picture playback.
 • For more details about picture sending methods.  (→253)
Preparation:
Y

ou need to register to “LUMIX CLUB”  (→231) and configure the Cloud Sync. setting to send 
a picture to a Cloud Folder.
See the part of the manual that applies to your objective.
Sending a picture each time one is recorded ([Send Images While Recording]) 
(→228)
Sending selected pictures ([Send Images Stored in the Camera]) (→229)
 ■About the images sent to a Cloud Folder by the use of [Cloud Sync. 
Service] (Current as of January 2014)
To send images to a PC, Cloud Sync. setting is required. Configure the settings on a 
PC with “PHOTOfunSTUDIO” or on a smartphone with “Image App”.
 • If you set the picture destination to [Cloud Sync. Service], sent pictures are  temporarily saved in the cloud folder

, and they can be synchronized with the device 
in use, such as the PC or smartphone.
 • A

 Cloud Folder stores transferred images for 30 days (up to 1000 pictures). 
Transferred images are deleted automatically 30 days after the transfer. 
Furthermore, when the number of stored images exceeds 1000, some images may 
be deleted depending on the [Cloud Limit]  (→254) setting even within 30 days after the 
transfer.
 • When the download of images from a Cloud Folder to all specified devices is  complete, images may be deleted from the Cloud Folder even within 30 days after 
the transfer

.    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 228 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [Cloud Sync. Service], and then 
press [MENU/SET]
Check the message and press [MENU/SET]
Select [Via Network] and connect (→246)
Check the send setting
 • When the connection is complete, the screen is displayed.  To change the send 
setting, press [DISP.] button.  (→254)
Take still pictures
 • To change the setting or disconnect, press [Wi-Fi] button.  (→186)
You cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 229 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Cloud Sync. Service], and then 
press [MENU/SET]
Check the message and press [MENU/SET]
Select [Via Network] and connect (→246)
Check the send setting
 • When the connection is complete, the screen is displayed.  To change the send 
setting, press [DISP.] button.  (→254)
(Continued on the next page)    
						

							Wi-Fi/NFC
Using WEB servicesVQT5E74
- 230 -
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→186)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MUL
TI] is limited.
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.