Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features

							Wi-Fi/NFC
Operating the camera using a smartphone/tabletVQT5E74
- 201 -
Sending location information to the camera from a smartphone/tablet
You can acquire location information from a smartphone, and write it on images 
afterwards. Refer to  (→170) for how to write the location information on the images recorded 
by this unit.
 ●Caution: 
Be sure to pay special attention to the privacy, the likeness rights, etc. of the 
subject when you use this function. Use at your own risk.
 ●Read the [Help] in the “Image App” menu for further details on how to operate. ●If you have changed the clock setting of this unit or the smartphone after [T ime sync], 
perform [Time sync] again.
 ●On the smartphone, you can set the acquisition interval of location information and 
check the transfer status of location information. Refer to [Help] in the “Image  App” 
menu for details.
 ●(When using “Image App” for iOS) 
If you press the Home or On/Off button of a smartphone while [Rec. loc. Info] is 
working, location information recording is stopped.
 ●The smartphone may fail to acquire location information in China and the border area 
in the neighboring countries of China. (Current as of January 2014)    
						

							Wi-Fi/NFC
Operating the camera using a smartphone/tabletVQT5E74
- 202 -
Operating the camera to send pictures to a smartphone or tablet
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending a picture each time one is recorded 
[Send Images While Recording] Yes No No No No
Sending selected pictures
[Send Images Stored in the Camera] Yes No Yes No No
 • Some images may not be played back or sent depending on the device. • See the operating instructions of the destination device for more information about 
picture playback.
 • For more details about picture sending methods.  (→253)
Preparation: 

Install “Image App” in advance.  (→189)
See the part of the manual that applies to your objective. 
Sending a picture each time one is recorded ([Send Images While Recording]) 
(→203)
Sending selected pictures ([Send Images Stored in the Camera]) (→205)    
						

							Wi-Fi/NFC
Operating the camera using a smartphone/tabletVQT5E74
- 203 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection] and press 
[MENU/SET]
Use cursor button to select [Send Images While Recording] 
and press [MENU/SET]
Use cursor button to select [Smartphone] and press  
[MENU/SET]
(Continued on the next page)    
						

							Wi-Fi/NFC
Operating the camera using a smartphone/tabletVQT5E74
- 204 -
Select [Via Network] or [Direct] and press [MENU/SET]
 ●When connecting with [Via Network]
(On the camera)
  Connect the camera to a wireless access point (→246)
(On your smartphone)
  Set Wi-Fi function to “ON”  Select the wirele ss access point you connected to the camera, and set  Start “Image App” (→189)
 ●When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]
(On the camera)
  Connect the camera to a smartphone (→249)
(On your smartphone)
  Start “Image App” (→189)
 ●When connecting with [Manual Connection] in [Direct]  (→191)
Select the device you wish to connect to
 • When the connection is established, the screen is displayed.  To change the send 
setting, press the [DISP.] button.  (→254)
Take still pictures
 • The still pictures are sent automatically after taking them. • T
o change the setting or disconnect, press [Wi-Fi] button. 
You cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Operating the camera using a smartphone/tabletVQT5E74
- 205 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Press [Wi-Fi] button
Use cursor button to select [New Connection] and press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera] and press [MENU/SET]
Use cursor button to select [Smartphone] and press  
[MENU/SET]
(Continued on the next page)    
						

							Wi-Fi/NFC
Operating the camera using a smartphone/tabletVQT5E74
- 206 -
Select [Via Network] or [Direct] and press [MENU/SET]
 ●When connecting with [Via Network]
(On the camera)
  Connect the camera to a wireless access point (→246)
(On your smartphone)
  Set Wi-Fi function to “ON”  Select the wirele ss access point you connected to the camera, and set  Start “Image App” (→189)
 ●When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]
(On the camera)
  Connect the camera to a smartphone (→249)
(On your smartphone)
  Start “Image App” (→189)
 ●When connecting with [Manual Connection] in [Direct]  (→191)
Select the device you wish to connect to
 • When the connection is established, the screen is displayed.  To change the send 
setting, press the [DISP.] button.  (→254)
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→186)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MUL
TI] is limited.
 • Confirmation screen is displayed. If you select [Y es], the operation is executed.    
						

							Wi-Fi/NFC
Displaying still pictures on a TV
VQT5E74- 207 -
You can display still pictures on a TV that is compatible with a DLNA certified digital 
media renderer (DMR) function.
Preparations: Set the TV to DLNA waiting Mode.
 • Read the operating instructions for your 
TV.
 • For details about compatible devices, refer to the website below. http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only .)
Press [Wi-Fi] button
Use cursor button to select [New Connection] and press 
[MENU/SET]
Use cursor button to select [Playback on TV] and press 
[MENU/SET]
Select [Via Network] or [Direct] to connect (→245)
Select the device you wish to connect to
 • When the connection is established, the screen is displayed.
Take or play back still pictures on this unit
 • To change the setting or disconnect, press [Wi-Fi] button. (→186)    
						

							Wi-Fi/NFC
Displaying still pictures on a TVVQT5E74
- 208 -
 ●When a TV is connected to this unit, the TV screen may temporarily return to the 
status before the connection. Pictures are displayed again when you take or play back 
pictures.
 ●[Effect] and [Sound] of the Slide Show are disabled. ●Motion pictures cannot be played back. ●During the multi/calendar playback, pictures displayed on the screen of this unit are 
not displayed on TV.    
						

							Wi-Fi/NFC
Wireless printing
VQT5E74- 209 -
You can send still pictures to a compatible printer and print them wirelessly.
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending selected pictures
[Send Images Stored in the Camera] Yes No No No No
 • Some images may not be played back or sent depending on the device. • For more details about picture sending methods. 
(→253)
Preparation:
 • Y

ou can print out recorded still pictures wirelessly from a PictBridge (wireless LAN-
compatible) *
 printer.
*
  Compliant with the DPS over IP standards. Contact the printer manufacturers for details on 
PictBridge (wireless LAN-compatible) printers.
Press [Wi-Fi] button
Use cursor button to select [New Connection], and then press 
[MENU/SET]
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Printer], and then press  
[MENU/SET]
Select [Via Network] or [Direct] to connect (→245)
Select a printer you want to connect
(Continued on the next page)    
						

							Wi-Fi/NFC
Wireless printingVQT5E74
- 210 -
Select the still picture and print
 • Pictures are selected the same way as when connecting by USB connection cable (supplied). For more details  (→291).
 • T

o change the setting or disconnect, press [Wi-Fi] button.  (→186)
 ●Motion pictures cannot be printed out.