Panasonic Digital Camera Dmc Zs40 Owners Manual For Advanced Features

							Application (View)
Using the [Playback] menuVQT5E74
- 181 -
 • For the setting procedures of the menu.  (→60)
[Print Set]
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at the shop to check for compatibility .)
For more information visit: 
http://panasonic.jp/dc/dpof_110/white_e.htm
Use   to select [SINGLE] or [MULTI] and press [MENU/SET]
Use     to select picture and press [MENU/SET]
Use   to set number of pictures and press [MENU/SET]
(Repeat steps  and  when using [MULTI] (up to 999 pictures))
 ●[SINGLE]
Date print set
No. to print
 ●[MULTI]
Date print set
No. to print
 • Date print setting/release → Press [DISP

.] button.
 ■To clear all
Select [CANCEL] in step 
 and select [Yes].
 ●Date print setting cannot be made for still pictures that have been taken with [Date 
Stamp] and pictures with a [Text Stamp] applied.
 ●Depending on the type of printer, the printer settings may take priority over camera 
settings.
 ●Cannot be set for files that are not compliant with the DCF standard. ●Some DPOF information set by other equipment cannot be used. In such cases, 
delete all of the DPOF information and then set it again with this camera.
 ●Print setting cannot be made for motion pictures. ●You cannot select the [Print Set] setting for still pictures recorded with the [Quality] 
setting [  ].    
						

							Application (View)
Using the [Playback] menuVQT5E74
- 182 -
 • For the setting procedures of the menu.  (→60)
[Protect]
Set protection to disable picture deletion. Prevents deletion of important pictures.
Use   to select [SINGLE] or [MULTI] and press [MENU/SET]
Use     to select picture and press [MENU/SET]
 ●[SINGLE]
Picture protected
 ●[MULTI]
Picture protected
 • To cancel → Press [MENU/SET] again.
 ■To clear all
Select [CANCEL] in step 
 and select [Yes].
 ●The picture is erased when formatting, even if it is protected. ●May not be effective when using other devices. ●When you set the write-protect switch on the card to the “LOCK” position, the picture 
is not erased.    
						

							Application (View)
Using the [Playback] menuVQT5E74
- 183 -
 • For the setting procedures of the menu.  (→60)
[Face Rec Edit]
Edit or delete the recognition information for pictures with mistaken Face Recognition.
Use   to select [REPLACE] or [DELETE] and press 
[MENU/SET]
Use   to select picture and press [MENU/SET]
Use   to select a person and press [MENU/SET]
 • If [DELETE], go to step . • People whose Face Recognition information has not been registered cannot be 
selected.
Use     to select the person to replace for another and 
press [MENU/SET]
Use  to select [Yes] and press [MENU/SET]
 ●When Face Recognition information is deleted, it cannot be restored. ●Pictures for which all Face Recognition information has been deleted are not 
categorized in Face Recognition during [Category Selection].
 ●Recognition information cannot be edited in protected pictures.    
						

							Application (View)
Using the [Playback] menuVQT5E74
- 184 -
 • For the setting procedures of the menu.  (→60)
[Copy]
You can copy pictures between built-in memory and memory card.
Use   to select the copy method (direction) and press 
[MENU/SET]
:  Copy all pict ures from built-in memory to card (go to step ).:  Copy 1 pictu re at a time from card to built-in memory.
Use   to select picture and press [MENU/SET]
Use  to select [Yes] and press [MENU/SET]
 • To cancel → Press [MENU/SET].
 ●Copying pictures may take several minutes. Do not turn off the camera or perform 
other operations during copying.
 ●If identical names (folder/file numbers) are present in the copy destination, a new 
folder for copying will be created when copying from built-in memory to card ([  ]). 
Identically-named files will not be copied from card to built-in memory ([  ]). ●The following settings are not copied. Set them again after copying. • [Print Set]    • [Protect]    • [Favorite] ●Only pictures from Panasonic digital cameras (LUMIX) may be copied. ●Motion pictures recorded in [AVCHD] format cannot be copied.    
						

							Wi-Fi/NFC
Wi-Fi® Function and NFC Function
VQT5E74- 185 -
Wi-Fi/NFC
 ■Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than 
wireless LAN devices, ensure that the appropriate measures are taken for safety 
designs and defects for the systems used. Panasonic will not take any responsibility 
for any damage that arises when using the camera for any purpose other than as a 
wireless LAN device.
 ■Use of the Wi-Fi function of this camera is presumed to be in countries 
where this camera is sold
There is the risk that the camera violates the radiowave regulations if used in countries 
other than those where this camera is sold, and Panasonic takes no responsibility for 
any violations.
 ■There is the risk that data sent and received via radio waves may be 
intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
We strongly recommend that you enable encryption in the settings of your wireless 
access point to ensure information security.
 ■Do not use the camera in areas with magnetic fields, static electricity or 
interference
 • Do not use the camera in areas with magnetic fields, static electricity or interference, such as near microwave ovens. Radio waves may not reach the camera.
 • Using the camera near devices such as microwave ovens or cordless telephones that use the 2.4 GHz radio wave band may cause a decrease in performance in both 
devices.
 ■Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function, wireless networks will be searched 
automatically. When this happens, wireless networks that you are not authorized to use 
(SSID *
) may be displayed, however do not attempt to connect to the network as it may 
be considered as unauthorized access.
*
  SSID refers to the name that is used to id entify a network over a wireless LAN connection. If the 
SSID matches for both devices, transmission is possible.
 ■Before Use
 • To use the Wi-Fi function on this unit, a wireless access point or a destination device  equipped with the wireless LAN function is required.
 ■The camera is compatible with NFC
Using the NFC (Near Field Communication) function, the 
camera and a smartphone/tablet can easily exchange the 
information needed to establish a Wi-Fi connection.    
						

							Wi-Fi/NFC
Wi-Fi® Function and NFC FunctionVQT5E74
- 186 -
 ■About the Wi-Fi connection lamp
Wi-Fi connection lamp
Lit blue:  When the Wi-Fi function is ON
Blinking blue:  When sending data
 ■About the [Wi-Fi] button
 ●Before a Wi-Fi connection is established, press and hold the [Wi-Fi] button to display 
the information (QR Code, SSID, password) you will need to connect the smartphone/
tablet directly to the camera. (→190)
 ●Before a Wi-Fi connection is established, press the [Wi-Fi] button to perform the 
following operations:
[New Connection]  (→190)
[History Connection]  (→250)
[Favorite Connection]  (→250)
[Wi-Fi Setup] (→255)
 ●Pressing the [Wi-Fi] button during a Wi-Fi connection enables the following operation.   
When connected using [Remote Shooting & View], a guide explaining how to 
terminate the Wi-Fi connection is displayed.
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination] Terminates the Wi-Fi connection, and allows you to select 
a different Wi-Fi connection.
[Change Settings for Sending 
Images]
*For details (→254).
[Register the Current Destination to 
Favorite] Registering the current connection destination or the 
connection method, you can easily connect with the 
same connection method next time.
[Network Address] Displays the MAC address and IP address of this unit. 
(→256)
*  This item will not be displayed if the des
tination for [Playback on TV] or [Send Images Stored in the 
Camera] is set to [Printer].    
						

							Wi-Fi/NFC
Wi-Fi® Function and NFC FunctionVQT5E74
- 187 -
 ●The camera cannot be used to connect to a public wireless LAN connection. ●Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a 
wireless access point.
 ●We recommend that you use a fully charged battery when you send pictures. ●When the battery indicator is flashing red, the connection with other equipment may 
not start or the connection may be disrupted. (A message such as [Communication 
error] is displayed.)
 ●When sending images on a mobile network, high packet communication fees may be 
incurred depending on the details of your contract.
 ●Pictures may not be completely sent depending on radio wave conditions. If the 
connection is terminated while sending pictures, pictures with missing sections may 
be sent.
 ●Do not remove the memory card or battery or move to an area without any 
reception while sending images.
 ●The LCD monitor display may become distorted for an instant while connected to the 
service, however this will not affect the image being sent.
[Airplane Mode]
To disable Wi-Fi connection, set [Airplane Mode] to [ON].
Select [Airplane Mode] from [Setup] menu and press  
[MENU/SET] 
(→60)
Use cursor button to select [ON] and press [MENU/SET]
 ●Electromagnetic waves from the camera can affect instruments and meters. In 
airplane cabins or in other restricted areas, set [Airplane Mode] to [ON].    
						

							Wi-Fi/NFC
What you can do with the Wi-Fi function
VQT5E74- 188 -
Operating the camera using a smartphone/tabletTaking pictures via a smartphone/tablet (remote recording) (→196)
Playing back pictures in the camera on a smartphone/tablet  (→197)
Saving pictures in the camera to the smartphone/tablet  (→197)
Sending pictures in the camera to social networking services  (→200)
Connect easily, transfer pictures easily
You can easily use the Wi-Fi function by 
pressing and holding the [Wi-Fi] button or 
using the NFC function. (→194, 198)
or
Press and 
hold
Hold the device 
close to the camera
Displaying still pictures on a TV 
(→207)
Wireless printing  (→209)
Sending pictures to AV equipment  (→211)
Still pictures and motion pictures can be sent to AV equipment in the home (home AV 
equipment). Through “LUMIX CLUB”, you can also send your still pictures and motion 
pictures to AV equipment of family and friends far away (outside AV equipment).
Sending pictures to a PC (→216)
Using WEB services (→221)
Through “LUMIX CLUB”, you can send still pictures and motion pictures to social 
networking services, etc. By selecting the setting to automatically transfer still pictures 
and motion pictures to [Cloud Sync. Service], you can receive the transferred still 
pictures and motion pictures on a PC or a smartphone/tablet.
Transferring pictures automatically [Smart Transfer] (→238)Transfer recorded images to a PC, an AV device or a Cloud Folder automatically.
 • Hereafter

, this manual uses the term “smartphone” for both smartphones and tablets 
unless it is necessary to distinguish between them.    
						

							Wi-Fi/NFC
Operating the camera using a smartphone/tablet
VQT5E74- 189 -
You can remotely operate the camera using a smartphone.
The “Panasonic Image App” (hereafter “Image App”) must be installed on your 
smartphone.
Installing the smartphone/tablet app “Panasonic Image App”
The “Image App” is an application provided by Panasonic that allows your smartphone to 
perform the following operations of a Wi-Fi-compatible LUMIX.
For Android™ apps For iOS apps
Supported OS 
(Current as of 
January 2014)Android 2.3.3 or later*iOS 5.0 or later
Installation 
procedure
  Connect your  Android device to a 
network
  Select “Google PlayTM Store”  Enter “Panasonic Image  App” or 
“LUMIX” to search for the app
  Select “Panasonic Image  App” and 
install it
 • The icon will be added to the  menu.
  Connect the iOS device to the 
network
  Select “App StoreSM”  Enter “Panasonic Image  App” or 
“LUMIX” to search for the app
  Select “Panasonic Image  App” and 
install it
 • The icon will be added to the  menu.
 •Use the latest version. •The screen differs depending on the operating system. •The service may not be able to be used properly depending on the type of 
smartphone being used. 
 •For the latest information on the “Image 

App”, refer to the support site below. 
http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only .)
 • When downloading the app on a mobile network, high packet communication fees may 
be incurred depending on the details of your contract.
*
  To connect this unit with [Wi-Fi Direct], Android OS 4.0 or above is required and the device must be  compatible with Wi-Fi Direct™.    
						

							Wi-Fi/NFC
Operating the camera using a smartphone/tabletVQT5E74
- 190 -
Connecting to a smartphone/tablet
You can easily establish a Wi-Fi connection on the camera by pressing and holding the 
[Wi-Fi] button or using the NFC function.
Preparation: Install “Image App” in advance.  (→189)
Press and hold the [Wi-Fi] button
SSID and Password
QR CodeWi-Fi connection lamp
(Lit blue)
 • The information (QR Code, SSID and Password) required for directly connecting your smartphone to this unit is displayed.
 • T

o change the connection method, press the [DISP.] button and select the 
connection method.  (→193)
 • By holding down the [Wi-Fi] button while the camera is turned off, you can turn the 
camera on.
The same screen can be displayed by selecting items from the menu as follows.  Press [Wi-Fi] button  Use cursor button to select [New Connection] and press [MENU/SET]  Use cursor button to select [Remote Shooting & V iew] and press [MENU/SET] 
(Continued on the next page)