Panasonic Digital Camera Dmc Zs35 Owners Manual For Advanced Features

							- 81 -
Recording
This effect adds a dark and relaxing feel to the overall image and 
enhances bright parts.
This effect creates a sepia image.
This effect gives a higher contrast to create an impressive black and 
white picture.
This effect gives your photo a dramatic contrast look.
[Low Key]
[Sepia]
[Dynamic Monochrome]
[Impressive Art]
•If you select this effect with Panorama Shot Mode, seams between 
pictures may become noticeable. 
						

							- 82 -
Recording
This effect produces the optimum brightness for both dark and bright 
parts.
This effect gives your photo a dramatic color look.
This effect reduces peripheral brightness to give the impression of a toy 
camera.
[High Dynamic]
[Cross Process]
Items that can be set
ColorGreen tone/Blue tone/Yellow tone/Red tone
•Press 2/1 to select the color to enhance, and 
press [MENU/SET].
[Toy Effect]
Items that can be set
Color Orange emphasized Blue emphasized
•Press 2/1 to select the color tone , and press 
[MENU/SET]. 
						

							- 83 -
Recording
This effect blurs peripheral areas to give the impression of a diorama.
This effect blurs the overall image to produce a soft feel.
[Miniature Effect]
Items that can be set
Direction of the blur Horizontal/Vertical
•Press 2/1 to select the direction of the blur, and 
press [MENU/SET].
•Display of the recording screen will be  delayed more than usual and the 
screen will look as if frames are being dropped.
•No sound is recorded in motion pictures.•Approximately 1/10 of the time period is recorded.
(If you record for 10 minutes, the resu lting motion picture recording will be 
approximately 1 minute long.)
The displayed available recording time is approximately 10 times. When 
switching to Recording Mode, please check the available recording time.
•Even if motion picture recording is terminated in a short time, the recording 
may actually continue for a certain period of time.
Keep the camera still until  the recording is complete.
•When taking pictures of a large size, the screen may turn black after taking 
the picture because of signal processing. This is not a malfunction.
[Soft Focus] 
						

							- 84 -
Recording
This effect transforms pin-points of light into a star effect.
This effect leaves one selected color to emphasize impressiveness.
[Star Filter]
[One Point Color]
∫Set the color to leave in
1Fit the color you want to leave in the 
frame at the center of the screen, and 
then press [MENU/SET].
•
If you press [DISP.], you will return to step 1.
2Check the color you have set, and then 
press [MENU/SET].
•
The set color is memorized even if the 
camera is turned off.
•Depending on the subject, the set color may not be left in. 
						

							- 85 -
Recording
Taking Pictures in Custom Mode
Recording Mode: 
You can register the current camera settings as custom settings.
If you then record in Custom Mode, you can use the registered settings.
•
Initial setting of the Program AE Mode is registered as the custom settings initially.
If you want to take pictures that have the same settings, you can register up to four items of the 
current camera settings to [Cust.Set Mem.].
1Set the mode dial to select the mode you wish to save, and then set the 
menu on the camera.
2Select [Cust.Set Mem.] on the [Setup] menu.  (P41)
3Press 3/4 to select the custom set to register and then press [MENU/
SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Registering Personal Menu Settings (Registering custom settings)
Custom setDescription of settings
The settings are registered for [ ] on the mode dial.
•You can record using by simply rotating the mode dial to the 
corresponding position. If you register the custom settings you 
use often, it is then convenient to use them.
The settings are registered for [ ] on the mode dial.
•You can register up to 3 sets of custom settings and use the 
different sets as condition demand. 
						

							- 86 -
Recording
You can easily call up the settings you have registered using [Cust.Set Mem.].
(When calling up a custom set registered for [ ])
Set the mode dial to [ ].
•The custom set registered for [ ] is called up.
(When calling up a custom set registered for [ ]/[ ]/[ ])
1Set the mode dial to [ ].
2Press 3/ 4 to select the custom set, and press [MENU/SET].
•Saving of the selected custom settings is displayed on the screen.
∫To change the menu settings
When the Recording Mode is set to [ ] or [ ] , registered settings do not change even if you 
change the menu settings temporarily.
You can change the registered settings from  [Cust.Set Mem.] in the [Setup] menu.
•
Since certain menu items would be reflected in  other recording modes, they are not saved.
Recording using registered custom set
5 5
C
2-1 
						

							- 87 -
Recording
Entering Text
You can enter the name of your baby or pet when taking pictures.
In addition, you can enter characters  (comments) on the pictures you 
have taken.
When a screen that looks like the one on the right is displayed, you can 
enter characters.
(Only alphabetical characters and symbols can be entered.)
1Press 3/ 4/2/1 to select text and then press [MENU/SET] to register.
•Move the cursor to [ ] and then press [MENU/SET] to switch text between [A] (capitals), [a] 
(lower case), [1] (numbers) and [&] (special characters).
(Pressing [DISP.] will also switch the text input mode)
•To enter the same character again, rotate the zoom lever towards [ Z] (T) to move the cursor.•The following operations can be performed by moving the cursor to the item and pressing 
[MENU/SET]:
•A maximum of 30 characters can be entered.
•A maximum of 15 characters can be entered for [ ], [ ] and [ ].
2Press 3/ 4/2/1 to move the cursor to [Set] and then press [MENU/SET] 
to end text input.
•Text can be scrolled if all of the entered text does not fit on the screen.
–[ ] ]: Enter a blank
–[Delete]: Delete a character
–[ ] : Move the entry position cursor to the left
–[ ]: Move the entry position cursor to the right
CancelSelect Input
ABC DEFMNOWXYZJKLGHITUVPQRSA
aAa&1
SetDeleteDeleteSet
Aa 
						

							- 88 -
Recording
Using the [Rec] Menu
For details on [Rec] menu settings, refer to P41.
Applicable modes: 
Set the number of pixels.
The higher the numbers of pixels, the finer the  detail of the pictures will appear even when they 
are printed onto large sheets.
¢ This item cannot be set in the Intelligent Auto Mode.
•In specific modes, Extended Optical Zoom cannot be used, and the picture size for [ ] is not 
displayed.
For details regarding modes in which Extended Optical Zoom cannot be used, refer to  P58.
•Pictures may appear mosaic depending on the subject and the recording conditions.
[Picture Size]
SettingsPicture Size
[] 4608k
3456
[]¢3264k2448
[] 2048k1536
[]¢640k480
[] 4608k
3072
[]¢3264k2176
[] 2048k
1360
[] 4608k
2592
[] 1920k
1080
[] 3456k
3456
[] 1536k
1536
X : Aspect ratio of a 4:3 TV
Y  :Aspect ratio of a 35 mm film camera
W  :Aspect ratio of a high-definition TV, etc.
 : Square aspect ratio
7
2.5
2.5 
						

							- 89 -
Recording
Applicable modes: 
Set the compression rate at which the pictures are to be stored.
•
The setting is fixed to [›] in the following case.
–[High Sens.] (Scene Mode)•[Quality] cannot be set in the Intelligent Auto Mode. Setting of other Recording Mode will be 
reflected.
[Quality]
SettingsDescription of settings
[A ]([Fine]) When giving priority to the picture quality
[› ]([Standard]) When using the standard picture quality and increasing the number of 
pictures to be recorded without changing the number of pixels 
						

							- 90 -
Recording
Applicable modes: 
This allows the Sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables 
pictures to be taken even in dark places wi thout the resulting pictures coming out dark.
•
For the focus range of flash when [AUTO] is set, refer to  P62.•The ISO sensitivity is automatically set under the following conditions.
–When recording motion pictures–When [Burst] is set to [ ]/[ ]•The shutter speed is determined by the [Sensitivity] setting as shown in the table below.
•You cannot select [ ] in Shutter-Priority AE Mode.
•You cannot select [AUTO] or [ ] in Manual Exposure Mode.
[Sensitivity]
SettingsDescription of settings
[AUTO] The ISO sensitivity is automatically adjusted according to the 
brightness.•Maximum [1600]
[]([Intelligent ISO])The ISO sensitivity is adjusted according to the movement of the 
subject and the brightness.•Maximum [1600]
[100]/[200]/[400]/[800]/
[1600]/[3200]
The ISO sensitivity is fixed to various settings.
[100][3200]
Recording location 
(recommended) When it is light (outdoors)
When it is dark
Shutter speed SlowFast
Noise LessIncreased
Jitter of the subject IncreasedLess
[Sensitivity]Shutter speed (Sec.)
AUTO/The shutter speed changes automatically according to ISO 
sensitivity setting.
100/200/4004 to 1/2000
800/16001 to 1/2000
32001/4 to 1/2000