Panasonic Digital Camera Dmc Zs35 Owners Manual For Advanced Features

							- 31 -
Basic
Taking Pictures with Your Favorite Settings 
(Program AE Mode)
Recording Mode: 
The camera automatically sets the shutter speed and the aperture value according to the 
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec] menu.
1Set the mode dial to [ ].
2Aim the AF area at the point you want to focus on.
3Press the shutter button halfway to focus and 
then press it fully to take the picture.
AISO sensitivity
B Aperture value
C Shutter speed1/60 1/60
1/60F3.3
F3.3F3.3ISO
ISO
ISO100
100
100
ABC 
						

							- 32 -
Basic
Focusing
Aim the AF area at the subject, and then press 
the shutter button halfway.
•The AF area may be displayed larger for certain zoom magnifications and in dark places.
∫About focus range
The focus range is displayed when operating the zoom.
•
The focus range is displayed in red when it is not focused after pressing 
the shutter button halfway.
The focus range may change gradually depending on the zoom position.
e.g.: Range of focus during the Intelligent Auto Mode
FocusWhen the subject is focusedWhen the subject is not 
focused
Focus indication  AOn Blinks
AF area  B White>Green White>Red
Sound Beeps 2 timesBeeps 4 times
1/60 1/60
1/60F3.3
F3.3F3.3ISO
ISO
ISO100
100
100
A
B
1X850.098ft.-¿
3 cm (0.098 feet)
2.0 m (6.6 feet)
T
W
5–71.0 m (3.3 feet) 
						

							- 33 -
Basic
∫When the subject is not in focus (such as when it is not in the center of the 
composition of the picture you want to take)
1Aim the AF area at the subject, and press 
the shutter button half way to fix the focus 
and exposure.
2Press and hold the shutter button half way 
while moving the camera as you compose 
the picture.
•
You can repeatedly retry the actions in step 1 before pressing the shutter button fully.
∫ Subject and recording conditions which are difficult to focus in
•Fast-moving subjects, extremely bright subjects or subjects without contrast•When recording subjects through windows or near shiny objects
•When it is dark or when jitter occurs•When the camera is too close to the subject or when taking a picture of both distant and near 
subjects 
						

							- 34 -
Basic
Recording Motion Pictures
Applicable modes: 
AAvailable recording time
B Elapsed recording time
•You can record motion pictures fitting each Recording Mode.•Release the motion picture button right after you press it.
•The recording state indicator (red)  C will flash while recording 
motion pictures.
•For the setting of [Rec Quality], refer to  P102.
2Stop the recording by pressing the motion picture 
button again.
1Start recording by pressing the 
motion picture button.
∫About the recording format for recording motion pictures
This unit can record motion pictures in MP4 format.
MP4:
This is a simpler video format best used when ex tensive editing is needed, or when uploading 
videos to the internet.
∫ About the compatibility of the recorded motion pictures
Even if a compatible MP4 playback device is us ed, the video or sound quality of the recorded 
motion pictures may be poor, or they may not be  able to be played. There may also be times 
when the recorded data is not displayed properly.  If you experience such issues, please play 
back the video on this camera.
3s3s3s
41m07s41m07s41m07s
B
AC 
						

							- 35 -
Basic
•Depending on the type of the card, the card access indication may appear for a while after recording 
motion pictures. This is not a malfunction.
•The screen may be blacked out momentarily, or the unit may record noise due to static electricity or 
electromagnetic waves etc. depending on the environment of the motion picture recording.
•Even if the aspect ratio setting is the same in still pictures and motion pictures, the angle of view may 
change at the start of the motion picture recording. 
When [Video Rec Area]  (P47) is set to [ON], angle of view during motion picture recording is 
displayed.
•About zooming while recording motion pictures
–If you use Extended Optical Zoom or Intelligent  Zoom, the angle of view may change drastically 
when you start or finish recording a motion picture.
–If you operate the zoom etc. while recording motion pictures, the sound of the operation may be 
recorded.
–The zoom speed will be slower than us ual when recording motion pictures.
–Operating the zoom while recording motion pictures can take time for the image to come into 
focus.
•Motion pictures cannot be recorded in the following cases.
–[Soft Focus]/[Star Filter] (Creative Control Mode)•It will be recorded in the following categories for certain Recording Modes. A motion picture 
recording matching each Recording Mode will be performed for the ones not listed below.
Selected Recording ModeRecording Mode while recording motion 
picture
•Program AE Mode•Aperture-Priority AE Mode•Shutter-Priority AE Mode
•Manual Exposure Mode•[Sports]/[HDR]/[Pet] (Scene Mode)
Normal motion picture
•[Baby1]/[Baby2] (Scene Mode)Portrait Mode
•[Night Portrait]/[Night Scenery]/[Handheld 
Night Shot]/[Starry Sky] (Scene Mode)Low Light Mode 
						

							- 36 -
Basic
Still pictures can be recorded even while recording a motion picture. (Simultaneous recording)
During motion picture recording, press the shutter button fully to record a still 
picture.
•The picture is saved with the following conditions.
•You can record up to 2 pictures per motion picture recording.
•Simultaneous recording is not possible in the following cases:–When [Rec Quality] is set to [VGA]–[Miniature Effect] (Creative Control Mode)
•If you press the shutter button halfway to take a picture while recording a motion picture, the camera 
will refocus and the refocus movement will be recorded to the motion picture.
To prioritize the motion picture image, taking still pictures by fully pressing the shutter button is 
recommended.
•Picture size and number of recordable pictures are displayed by pressing the shutter button halfway.•Recording of motion picture will continue after taking the still picture.
•Operation sound of the shutter button may be recorded when a picture is taken during motion picture 
recording.
•The flash setting is fixed to [ Œ].
Recording still pictures while recording motion pictures
Recording quality settingPicture size
[FHD]/[HD]3.5 M (16:9) 
						

							- 37 -
Basic
Playing Back
1Press [(].
∫Playing Back Motion Pictures
Press  2/1  to select a picture with a Motion Picture icon 
(such as [ ]), and then press 3 to play back.
C Motion picture icon
D Motion picture recording time
•After playback starts, the elapsed playback time is 
displayed on the screen.
For example, 8 minutes and 30 seconds is displayed as [08m30s].
•Operations during Motion Picture Playback
¢The fast forward/rewind speed increases if you press  1/2  again.
–You can adjust the volume with the zoom lever.
2Press 2/ 1 to select pictures.
A File number
B Picture number
•If you press and hold  2/1, you can play back the pictures 
in succession.
•Speed of picture Forwarding/Rewinding changes 
depending on the playback status.
3Play/Pause
4 Stop
2 Fast rewind
¢/
Frame-by-frame rewind (while pausing)
1 Fast forward
¢/
Frame-by-frame forward (while pausing)
100-0001 100-0001
100-00011/ 5
1/ 5
AB
03s03s03s
CD 
						

							- 38 -
Basic
•When the camera is turned off, press and hold [(]. If you turn it on this way, the playback screen 
will be displayed automatically.
(If too many images are stored in the card, it may take a while for the camera to turn on.)
•This camera complies with the DCF standard “D esign rule for Camera File system” established by 
JEITA “Japan Electronics and Information Technology Industries Association” and with Exif 
“Exchangeable Image File Format”. Files that do not comply with the DCF standard cannot be 
played back.
•Images recorded or edited with the camera may not be played back correctly on other devices and 
applied effects may not appear on the devices.
Also, images recorded on other devices may not be played back on the camera and functions of the 
camera may not be available for the images.
•The lens barrel retracts about 15 seconds after switching from Recording Mode to Playback Mode.
While the lens barrel is retracting, you may not be able to operate the camera.
•The file format that can be played back with this camera is MP4.
•Be careful not to block the speaker of the camera during playback.
Rotate the zoom lever towards [L ] (W).
1 screen>12 screens >30 screens >Calendar screen 
display
A Number of the selected picture and the total number of 
recorded pictures
•Rotate the zoom lever towards [ Z] (T) to return to the 
previous screen.
•Pictures displayed using [ ] cannot be played back.
∫ To return to normal playback
Press  3/4 /2/ 1 to select a picture and then press [MENU/SET].
Displaying Multiple Screens (Multi Playback)
Using the Playback Zoom
Rotate the zoom lever towards [Z ] (T).
1k > 2k> 4k > 8k > 16k
•When you rotate the zoom lever towards [ L] (W) after enlarging 
the picture, the magnification becomes lower.
•When you change the magnification, the zoom position indication 
B appears for about 2 seconds, and the position of the enlarged 
section can be moved by pressing  3/4/ 2/1.
•The more a picture is enlarged, the more its quality deteriorates.
1/26A
2X 2X
2X
B 
						

							- 39 -
Basic
You can create a single still picture from a recorded motion picture.
1Press 3 to pause motion picture playback.
2Press [MENU/SET].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
•Still pictures will be saved with the following settings:
•Still pictures created from a motion picture may be coarser than with normal picture quality.
•Still pictures cannot be created from motion pictures recorded in [HD]/[VGA].
Creating Still Pictures from a Motion Picture
[Picture Size]2M (16:9)
[Quality]› 
						

							- 40 -
Basic
Deleting Pictures
Once deleted, pictures cannot be recovered.
•Pictures on the built-in memory or the card that are being played back will be deleted.
•Pictures that are not in the DCF standard or those that are protected cannot be deleted.
Select the picture to be deleted, and then 
press [ ].
•Confirmation screen is displayed.
Picture is deleted by selecting [Yes].
•Do not turn the camera off while deleting.•Depending on the number of pictures to be deleted, it may take some time to delete them.
To delete a single picture
To delete multiple pictures (up to 50) or all the pictures
1Press [ ].
2Press 3/4 to select [Delete Multi] or 
[Delete All] and then press [MENU/SET].
•[Delete All]  > Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
3(When [Delete Multi] is selected)
Press 3/ 4/2/1 to select the picture, and 
then press [DISP.] to set.  (Repeat this step.)
•[ ] appears on the selected pictures.
If [DISP.] is pressed again, the setting is canceled.
4(When [Delete Multi] is selected)
Press [MENU/SET].
•Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
46
2
31
5