Panasonic Digital Camera Dmc Zs35 Owners Manual For Advanced Features

							- 141 -
Wi-Fi
You can transfer images while charging the camera.
Preparation:
Configure [Smart Transfer] in advance. (P140)
1Turn off the camera.2(When using a power outlet)
Connect the AC adaptor (supplied) and this camera with the USB connection cable 
(supplied), and insert the AC adaptor (supplied) into the power outlet.
(When using a PC)
Connect this unit to a PC by using the USB connection cable (supplied).
•
[Smart Transfer] starts automatically according to the [Charge Priority]  (P142) setting.•Depending on the specifications of the PC, [Smart Transfer] may fail.
•If there are images that are not transferred when [Auto Transfer] is set to [OFF], the message that 
confirms whether to transfer these images is displayed. Select a desired option.
You can transfer images immediately.
Preparation:
Configure [Smart Transfer] in advance.  (P140)
1Connect the AC adaptor (supplied) and this camera with the USB connection cable 
(supplied), and insert the AC adaptor (supplied) into the power outlet.
2Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].  (P41)3Press 3/4  to select [Smart Transfer], and press [MENU/SET].
4Press  3/4  to select [Transfer Now], and press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Transferring automatically
Transfer images instantly 
						

							- 142 -
Wi-Fi
Changing the transfer destination or settings of images.1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P41)
2Press 3/4  to select [Smart Transfer], and press [MENU/SET].3Press  3/4  to select [Set Destination], and press [MENU/SET].
4Press  3/4  to select the item, and press [MENU/SET].
To switch the priority setting  between charging and image transfers.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].  (P41)
2Press 3/4  to select [Smart Transfer], and press [MENU/SET].3Press  3/4  to select [Charge Priority], and press [MENU/SET].4Press  3/4  to select the item, and press [MENU/SET].
•
Exit the menu after it is executed.
You can check the date and details of transferred images.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].  (P41)2Press 3/4  to select [Smart Transfer], and press [MENU/SET].3Press  3/4  to select [Display Log], and press [MENU/SET].
•Dates and content of transferred images are displayed.
Exit the menu when you are done viewing.
[Set Destination]
ItemDescription of settings
[Destination] Changes the wireless access point to be connected.
Select the method for connecting to a wireless access point, and set.
•Refer to P144 for details.
[Size]Resizes the image to send.
[Original]/[Change]•You can select the picture size from [M] or [S] in [Change].
The aspect ratio does not change.
[Charge Priority]
ItemDescription of settings
[ON]
Give priority to charging. Tr ansfer images after charging.
[OFF]Give priority to image transfers.•When the remaining battery power is low, charging may be given the 
priority.
[Display Log] 
						

							- 143 -
Wi-Fi
About Connections
You can select a connection method after selecting a Wi-Fi function and a destination.
Performing a direct connection is convenient for when you are in a place away from home 
where wireless access points are not available  or for when connecting temporarily to a device 
you do not usually use.
When connecting with the same settings as the  previous ones, you can use the Wi-Fi function 
quickly by connecting via [History Connection] or  [Favorite Connection].
A Wireless access point
[Via Network] Connects via a wireless access point. P144
[Direct]Your device connects directly to this unit. P146
CancelSelectSet
DirectVia Network
Select connection method
Connect to the
network (AP)A 
						

							- 144 -
Wi-Fi
You can select the method for connecting to a wireless access point.¢WPS refers to a function that allows you to easily configure the settings 
related to the connection and security of wireless LAN devices.
To check if the wireless access point you are using is compatible with 
WPS, refer to the manual of the wireless access point.
Connecting from your house (via the network)
Connection methodDescription of settings
[WPS (Push-Button)] Save push button type wireless access point that is compatible with 
Wi-Fi Protected Setup
TM with a WPS mark.
Press the wireless access point WPS 
button until it switches to WPS Mode.
•
Refer to the wireless access point instruction 
manual for details.
e.g.:
[WPS (PIN code)]Save PIN code type wireless access point that is compatible with Wi-Fi 
Protected Setup with a WPS mark.
1Press 
3/4  to select the wireless access point you are 
connecting to, and press [MENU/SET].
2Enter the PIN code displayed on the camera screen into 
the wireless access point.
3Press [MENU/SET].
•Refer to the wireless access point instruction manual for details.
[From List] Select this option when you are not sure about the WPS compatibility, or 
when you want to search for and connect to a wireless access point.•Refer to P145 for details.
CancelSelectSet
WPS (PIN code)
From ListWPS (Push-Button)
Select connection method
Use button on
WPSWPS button
the WPS device 
						

							- 145 -
Wi-Fi
Search for available wireless access points.
•Confirm encryption key of the selected wireless access point if the network authentication is 
encrypted.
•When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless 
access point you are using.
1Press 3/4  to select the wireless access point you are 
connecting to, and press [MENU/SET].
•
Pressing [DISP. ]  will search for a wireless access point again.•Wireless access points with non-alphanumeric characters may not 
be displayed correctly.
•If no wireless access point is found, refer to “When connecting with 
[Manual Input]” on P145 .
2(If network authentication is encrypted)
Enter the encryption key.
•
For details on how to enter characters, refer to “Entering Text” section on  P87.
∫When connecting with [Manual Input]1On the screen displayed in step 1 of “If you are not sure about the WPS 
compatibility (connecting by [From List])”, select [Manual Input] by pressing  3/4, 
then press [MENU/SET].
2Enter the SSID of the wireless access point you are connecting to, then select [Set].
•For details on how to enter characters, refer to “Entering Text” section on  P87.
3Press  3/4  to select the network authentication type, and press [MENU/SET].
•For information on network authentication, see the manual of the wireless access point.
4Press  3/4  to select the encryption type, and press [MENU/SET].
•The type of settings that can be changed may vary depending on the details of network 
authentication settings.
5(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
•
Check the wireless access points instruction manu al and settings when saving a wireless access 
point.
•If no connection can be established, the wireless access point’s radio waves may be too weak.
Refer to “Message Display”  (P165)  and “Troubleshooting” (P168)  for details.•Transmission speed may decrease, or may not be usable depending on the environment it is used 
in.
If you are not sure about the WPS compatibility (connecting by [From List])
Network authentication typeEncryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key][WEP]
[Open][No Encryption]/[WEP]
CancelSelectSet
Manual Input0123456ABCD-1 0123456ABCD
Select the destination (AP)
UpdateDISP. 
						

							- 146 -
Wi-Fi
You can select the method for connecting to the device you are using.
Choose the connection method supported by your device, such as a 
smartphone or tablet.
Connecting from a location away fr om your house (direct connection)
Connection methodDescription of settings
[WPS Connection][WPS (Push-Button)]
1Press 
3/4  to select [WPS (Push-Button)] and then press 
[MENU/SET].
2Set the destination device, such as a smartphone or tablet, 
to WPS mode.
•
You can wait longer for a connection by pressing the [DISP.] button 
on this unit.
[WPS (PIN code)]
1Press  3/4  to select [WPS (PIN code)] and then press 
[MENU/SET].
2Enter the PIN code of the destination device, such as a 
smartphone or tablet, into the camera.
[Manual Connection]
Enter the SSID and password into the 
device. The SSID and password are 
displayed on the connection waiting 
screen of this unit.
•
If the destination is [Smartphone], you can set 
up a connection by scanning the QR code with 
the smartphone.  (P126)
CancelSelectSet
Manual ConnectionWPS Connection
Select connection methodConnect to
the WPS device
Cancel
SSID: 
Password: 
Enter the passwordEnter the password
in the destination device settings 
						

							- 147 -
Wi-Fi
When the Wi-Fi function is used, a record is saved in the history. You can register records as 
favorites.
Connecting from the history or favorites allows you to easily connect with the same settings as 
the previous ones.
1Press [Wi-Fi].
2Press 3/4/2/1 to select [History Connection] or 
[Favorite Connection], and then press [MENU/SET].
3Select the desired connection setting with  3/4, and 
then press [MENU/SET].
1Press [Wi-Fi].2Press  3/4 /2/ 1 to select [History Connection], and then press [MENU/SET].
3Select the item you want to register to favorites with 3 /4 , and then press  1.4Enter a registration name.
•The registration name field will be blank before you enter characters.•For details on how to enter characters, refer to “Entering Text” section on  P87.•A maximum of 30 characters can be entered. A two-byte character is treated as two characters.
Connecting quickly with the same settings as the previous ones ([History 
Connection]/[Favorite Connection])
[History Connection] Connects with the same settings as the previous ones.
[Favorite Connection]Connects with settings registered as favorites.
Registering records as favorites
CancelSelectSet
Wi-Fi
History
Connection
Wi-Fi
Setup
New
Connection
Favorite
Connection
CancelSelectSet
History Connection
Register to FavoriteDISP.
1/1 
						

							- 148 -
Wi-Fi
1Press [Wi-Fi].2Press 3/4 /2/ 1 to select [Favorite Connection], and then press [MENU/SET].
3Select the favorite item you want to edit with  3/4, and then press 1 .4Press 3/4  to select the item, and press [MENU/SET].
•
Performing [Reset Wi-Fi Settings] clears the history and the contents saved in [Favorite Connection].•When connecting to a network to which many PCs are connected by using [History Connection] or 
[Favorite Connection], a connection attempt may fail because the previously-connected device will 
be identified from among many devices.
If a connection attempt fails, reconnect by using [New Connection].
Editing the items registered to favorites
ItemDescription of settings
[Remove from Favorite] —
[Change the Order in 
Favorite]Select the destination with 
3/4, and then press [MENU/SET].
[Change the Registered 
Name]•For details on how to enter characters, refer to “Entering Text” 
section on P87 .
•A maximum of 30 characters can be entered. A two-byte 
character is treated as two characters.
Save frequently-used Wi-Fi connection settings as favorites
The number that can be saved in the history is limited.
We recommend that you save frequently-used Wi-F i connection settings by registering them 
as favorites. (P147)
Checking the connection detail of the history or favorite
If [DISP.] is pressed when selecting an item in the history or favorites, the detail of the 
connection can be displayed. 
						

							- 149 -
Wi-Fi
To send images, select [New Connection] , and select the method for sending them.
Even after completing the connection, you can still change the size of the images to be sent.
∫Images that can be sent
¢ Sending by [Send Images While Recording] is not available.
•Some images may not be played back or sent depending on the device.•For information on the playback of images, check the operating instructions of the destination 
device.
About settings for sending images
DestinationJPEGMP4¢
[Smartphone] ±±
[PC] ±±
CancelSelectSet
Send Images Stored in the CameraSend Images While RecordingRemote Shooting & ViewSelect a function 
						

							- 150 -
Wi-Fi
A picture can be automatically sent to a specified device every time you take it.
•Since the camera gives priority to recording,  sending may take longer during the recording.
•When connected with [Send Images While Recording], [ ] is displayed 
on the recording screen, and [ ] is displayed while sending a file.
•If you turn off this unit or the Wi-Fi connection before sending is complete, 
unsent pictures will not be resent.
•You may not be able to delete files or use the playback menu while 
sending.
•Motion pictures cannot be sent.
Images can be selected and sent after recording.
•
Details of the playback menu [Print Set] settings will not be sent.
•Some images taken with a different camera may not be able to be sent.•Images that have been modified or edited with a computer may not be able to be sent.
If you press [DISP.] after completing a connection,  you can change the size of the images to be 
sent.
•
The size in which motion pictur es will be sent cannot be changed.
Divide the motion picture using [Video Divide]  (P115).
Send Images While Recording
Send Images Stored in the Camera
Changing the settings for sending images
[Size] Resize the image to send.
[Original]:
Send the image without changing the size.
[Change]: You can select the picture size from [M] or [S].
The aspect ratio does not change.