Panasonic Digital Camera Dmc Zs35 Owners Manual For Advanced Features

							- 121 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or from 
a card to the built-in memory.
1Select [Copy] on the [Playback] menu.
2Press 3/4 to select the copy destination and then press [MENU/SET].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
Exit the menu after it is executed.
•Do not turn the camera off at any point during the copying process.
•If a picture exists with the same name (folder number/file number) as the picture to be copied in the 
copy destination when [ ] is selected, that picture is not copied.
•It may take time to copy the picture data.•The settings of [Print Set] and [Protect] will not  be copied. Set them again after copying is 
completed.
[Copy]
[] ([IN>SD]): All the picture data in the built-in memory are copied onto the card 
at one time.
[] ([SD>IN]): One picture at a time is copied from the card to the built-in memory.
Press  2/1  to select the picture and then press [MENU/SET]. 
						

							- 122 -
Wi-Fi
Wi-FiR function
∫Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than wireless 
LAN devices, ensure that the appr opriate measures are taken for safety designs and defects 
for the systems used. Panasonic will not take any  responsibility for any damage that arises 
when using the camera for any purpos e other than as a wireless LAN device.
∫ Use of the Wi-Fi function of this camera is presumed to be in countries where this 
camera is sold
There is the risk that the camera violates the  radiowave regulations if used in countries other 
than those where this camera is sold, and Panasonic takes no responsibility for any violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
We strongly recommend that you set an encryption to maintain information security.
∫ Do not use the camera in areas with magnetic fields, static electricity or interference
•
Do not use the camera in areas with magnetic fields, static electricity or interference, such as near 
microwave ovens. These may cause the interruption of the radio waves.
•Using the camera near devices such as microwave ovens or cordless telephones that use the 
2.4 GHz radio wave band may cause a decrease in performance in both devices.
∫ Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function,  wireless networks will be searched automatically. 
When this happens, wireless networks that  you are not authorized to use (SSID
¢) may be 
displayed, however do not attempt to connect to  the network as it may be considered as 
unauthorized access.
¢ SSID refers to the name that is used to identi fy a network over a wireless LAN connection. If the 
SSID matches for both devices, transmission is possible.
∫ Before Use
•To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped with 
the wireless LAN function is required.
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access 
point.
•The camera cannot be used to connect to a public wireless LAN connection.•It is recommended to use a fully charged battery when sending images.
When the battery indicator is flashing red, the connection with other equipment may not start or the 
connection may be disrupted.
(A message such as [Communication error] is displayed.)
•It is not possible to establish a Wi-Fi connection when the camera is set to Playback Mode and an 
AV cable (optional) or an HDMI micro cable is conn ected to it. [Wi-Fi] button operations are disabled. 
						

							- 123 -
Wi-Fi
∫About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
Pressing and holding [Wi-Fi] before connecting to Wi-Fi 
(When connecting to a smartphone/tablet)
•The information required for connecting the smartphone/tablet 
to this unit (QR code, SSID and password) is displayed.  (P126)
Pressing [Wi-Fi]  before connecting to Wi-Fi
•Following items can be selected.
Pressing [Wi-Fi] when using a Wi-Fi connection
•Following items can be selected.
•Do not remove the memory card or battery or move to an area without any reception while 
sending images.
•The monitor display may become distorted for an instant while connected to the service, however 
this will not affect the image being sent.
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi connection
[New Connection] (P126)
[History Connection]  (P147)
[Favorite Connection] (P147)
[Wi-Fi Setup]  (P151)
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination] Terminates the Wi-Fi connection, and allows you to select a 
different Wi-Fi connection.
[Change Settings for Sending 
Images] Refer to P150 for details.
[Register the Current 
Destination to Favorite] Registering the current connection destination or the 
connection method, you can easily connect with the same 
connection method next time.
[Network Address] Displays the MAC address and IP address of this unit.
Cancel
Please scan the QR code using Image App,
or enter the password into Wi-Fi settingsPlease set on your smartphone
SSID: Password: 
Change methodDISP. 
						

							- 124 -
Wi-Fi
•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
•Pictures may not be completely sent depending on radio wave conditions. If the connection is 
terminated while sending pictures, pictures with missing sections may be sent.
What you can do with the Wi-Fi function
Controlling with a Smartphone/Tablet
Recording images remotely with a smartphone (P130)
Playing back pictures in the camera (P130)
Saving images stored in the camera  (P131)
Sending acquired location information to the camera 
(P131)
When sending images to PC
Sending an image each time a recording is made  (P137)
Sending selected images  (P138)
To transfer images automatically  (P139) 
						

							- 125 -
Wi-Fi
Controlling with a Smartphone/Tablet
Using a smartphone/tablet, you can record images on the 
camera and save them.
You need to install “ Panasonic Image App ” (referred to as 
“ Image App ” from this point on )  on your smartphone/tablet.
The “ Image App ” is an application provided by Panasonic.
•
OS (As of January 2014)
•Use the latest version.•Depending on the supported OS or the version of the “ Image App ”, some screenshots and contents 
in this owner’s manual may differ from the actual app.
•The service may not be able to be used properly depending on the type of smartphone/tablet being 
used.
•For the latest information on “Image App”, refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
•When downloading the app on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
Installing the smartphone/tablet app “ Image App ”
App for AndroidTM: Android 2.3.3 or higher
App for iOS: iOS 5.0 or higher
1Connect the smartphone/tablet to a network.
2( Android) Select “Google PlayTM Store”.
(iOS) Select “App Store
SM”.
3Enter “ Panasonic Image App ” or “LUMIX” into the search box.
4Select “ Panasonic Image App ”   and install it. 
						

							- 126 -
Wi-Fi
By pressing and holding [Wi-Fi], you can easily connect the camera  to a smartphone or tablet.
1Press and hold [Wi-Fi].
•The information required for connecting the smartphone/tablet to 
this unit (QR code, SSID and password) is displayed.
•To change the connection method, press [DISP.], and then select 
the connection method.
•If you press and hold [Wi-Fi] when the camera is turned off, you 
can turn it on.
•The same screen can be displayed by selecting the following menu items.
Connecting to a smartphone/tablet
Preparations:
•
Install the “ Image App ” in advance.  (P125)
1Press [Wi-Fi].
2 Press  3/4/ 2/1 to select [New Connection], and then press 
[MENU/SET].
3 Press  3/4 to select [Remote Shooting & View], and then 
press [MENU/SET].
CancelSelectSet
Wi-Fi
History
Connection
Wi-Fi
Setup
New
Connection
Favorite
Connection
CancelSelectSet
Send Images Stored in the CameraSend Images While RecordingRemote Shooting & ViewSelect a function 
						

							- 127 -
Wi-Fi
2Operate the smartphone/tablet.
•Once the connection is complete, the image from the camera will be displayed on the screen of 
the smartphone/tablet. 
(After this operation, it may take a while for the connection to be completed.)
•The connection method differs according to your smartphone/tablet.
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1 Start “ Image App ”.  (P125)
2 Select [QR code], and then select [OK] .
3 Using “ Image App ”, scan the QR code displayed on the 
screen of the camera.
4 Install the profile of “ IMAGE APP ”.
•
A message will be displayed on the browser.
•If the smartphone is locked with a passcode, enter the 
passcode to unlock the smartphone.
5Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
7 Select the SSID displayed on the screen of the camera.
8 Return to the home screen, and then start “ Image App ”. 
(P125)
Cancel
Please scan the QR code using Image App,
or enter the password into Wi-Fi settingsPlease set on your smartphone
SSID: Password: 
Change methodDISP.
IMAGE APPPanasonic Corporation
Wi-FiWi-Fi
0123456789ABC
Wi-Fi
0123456789ABC 
						

							- 128 -
Wi-Fi
When using an SSID and password to set up a connection
1Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.
2 Select the SSID displayed on the screen of the camera.
3 Enter the password displayed on the screen of the camera. 
(Only when connecting for the first time)
4 Start “ Image App ”.  (P125)
If you are using an Android device
When scanning the QR code to set up a connection
1Start “ Image App ”.  (P125)
2 Select [QR code].
3 Using “ Image App ”, scan the QR code displayed on the 
screen of the camera.
When using an SSID and password to set up a connection
1Start “ Image App ”.  (P125)
2 Select [Wi-Fi].
3 Select the SSID displayed on the screen of the camera.
4 Enter the password displayed on the screen of the 
camera. 
(Only when connecting for the first time)
•
If you mark the box that enables the smartphone to display the password, you can see 
the password as you enter it.
Wi-Fi
0123456789ABC
Cancel
Please scan the QR code using Image App,
or enter the password into Wi-Fi settingsPlease set on your smartphone
SSID: Password: 
Change methodDISP.
Cancel
Please scan the QR code using Image App,
or enter the password into Wi-Fi settingsPlease set on your smartphone
SSID: Password: 
Change methodDISP. 
						

							- 129 -
Wi-Fi
∫Changing the connection method
When connecting with [Via Network]:
(On the camera)
1Press  3/4  to select [Via Network], and then press [MENU/SET].
•Follow the connection procedure described on  P144 to connect the camera to a wireless 
access point.
(On your smartphone/tablet)
2Turn on the Wi-Fi function.3Connect the smartphone/tablet to the wireless access point to which the camera is 
connected.
4Start “ Image App ”.  (P125)
When connecting with [WPS Connection]
¢ in [Direct]:
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
•Follow the connection procedure described on  P146 to connect the camera to the smartphone/
tablet.
(On your smartphone/tablet)2Start “ Image App ”.  (P125)
¢WPS is a function that allows you to easily set up a connection with a wireless LAN device and 
make security-related settings. To check whether your smartphone/tablet supports the function, 
refer to the operating instructions of the smartphone/tablet.
∫Terminating the connection
After use, terminate the connection to the smartphone/tablet. Once turning off the 
connection, you can perform normal recording and playback.
1Press [ ].
•Confirmation screen is displayed.
It is executed when [Yes] is selected.
2On the smartphone/tablet, close “ Image App ”.
To change the connection method, 
press [DISP.], and then select the 
connection method.
(If you are using an iOS device)
On the screen of “ Image App ”, press the home button to close the app.
(If you are using an Android device)On the screen of “ Image App ”, press the return button twice to close the app.
Cancel
Please scan the QR code using Image App,
or enter the password into Wi-Fi settingsPlease set on your smartphone
SSID: Password: 
Change methodDISP.CancelSelectSet
DirectVia Network
Select connection method
Connect to the
network (AP) 
						

							- 130 -
Wi-Fi
1Connect to a smartphone/tablet. (P126)
2Operate the smartphone/tablet.
1Connect to a smartphone/tablet. (P126)2Operate the smartphone/tablet.
Taking pictures via a smartphone/tablet (remote recording)
1Select [ ].
2 Operate the zoom to decide on the composition.
3 Release the shutter.
•
The recorded images are saved in the camera.•Motion pictures cannot be recorded.•Some settings are not available.
Playing back pictures in the camera
1Select [ ].
•Images in the camera are displayed on the smartphone. 
2Touch an image to enlarge it.
•Motion pictures cannot be played back.
A
 
