Panasonic Digital Camera Dmc Sz9 Owners Manual For Advanced Features

							- 151 -
Wi-Fi
Send Images Stored in the Camera
•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
•Details of the playback menu [Favorite] or [Print Set] settings will not be sent.•Some images taken with a different camera may not be able to be sent.•Images that have been modified or edited with a computer may not be able to be sent.
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [Smartphone], and then press [MENU/SET].5Selecting the connection method.  (P152)
6Press 3/4  to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P145)
7Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P142)
8Select and send the images. (P153)
When sending images to smartphone/tablet
Preparations:
•
Install the “ Image App ” in advance.  (P132) 
						

							- 152 -
Wi-Fi
∫When you want to connect to the smartphone/tablet via a wireless access point(On your smartphone/tablet)
1On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.2Select the wireless access point you want to connect to, and set.3Start “ Image App ” on your smartphone/tablet.¢ (P132)(On the camera)
4Press  3/4  to select [Via Network], and then press [MENU/SET].5Select the method for connecting to a wireless access point, and set.
•Refer to P138 for details.
∫ When you want to directly connect the smartphone/tablet to this unit
•When connecting with [Wi-Fi Direct] or [WPS Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
•For details on the connection methods, refer to  P140.
(On your smartphone/tablet)2Start “ Image App ” on your smartphone/tablet.¢ (P132)
•When connecting with [Manual Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
2Press  3/4  to select [Manual Connection], and then press 
[MENU/SET].
(On your smartphone/tablet)
3On the setting menu of your smartphone/tablet, turn on the 
Wi-Fi function.
4Select the SSID that matches the one displayed on the screen of 
this unit, and then enter the password.
5Start “ Image App ” on your smartphone/tablet.¢  (P132)¢ A window indicating that the smartphone/tablet is connecting to the camera is displayed. If you 
are using an Android device, press the back key. If you are using an iOS device, close the 
window.
Selecting the method for connecting to the smartphone/tablet 
						

							- 153 -
Wi-Fi
•The number of pictures that can be sent by [MULTI] is limited.
Select and send the images
[SINGLE] setting
1 Press  2/1 to select the picture.
2 Press [MENU/SET].
•
Confirmation screen is displayed. It is executed 
when [Yes] is selected.
[MULTI] setting
1Select the picture, and then press [DISP.] to set 
(repeat).
•
The setting is canceled when [DISP.] is pressed 
again.
2Press [MENU/SET].
•Confirmation screen is displayed. It is executed 
when [Yes] is selected.
[SINGLE] [MULTI]
Press  2/1 to select 
the picture. Press 
3/4/2 /1  to 
select the pictures.
46
2
31
5 
						

							- 154 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [PC], and then press [MENU/SET].
5Press  3/4  to select connection method, and then press [MENU/SET].
6Press  3/4  to select a PC you want to connect, and then press [MENU/SET].7Press  3/4  to select the destinations folder of the PC, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P145)
8Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P142)
9Select and send the images. (P153)
•
Folders sorted by the sent date are created in the specified folder, and pictures are saved in those 
folders.
•If the screen for a user account and password entry appears, enter the one you set on your PC.
When sending images to PC
Preparations:
•
Turn the computer on.•Prepare folders for receiving images on the PC before sending a picture to the PC.  (P147)
•If the workgroup of the destination PC has been changed from the standard setting, you also need 
to change the setting of this unit in [PC Connection]. (P168)
[Via Network]When you want to connect to your PC via a wireless access point. 
(P138)
[Direct]When you want to directly connect your PC to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P140) 
						

							- 155 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [Cloud Sync. Service], and then press [MENU/SET].5Press [MENU/SET].6Press  3/4  to select [Via Network], and then press [MENU/SET].
7Press  3/4  to select connection method, and then press [MENU/SET].  (P138)8Check the send setting.
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.]. (P145)
9Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P142)
10Select and send the images. (P153)
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB”  (P163) and configure the Cloud Sync. setting   (P148) 
to send a picture to a Cloud Folder. 
						

							- 156 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [Web service], and then press [MENU/SET].5Press  3/4  to select [Via Network], and then press [MENU/SET].6Press  3/4  to select connection method, and then press [MENU/SET].  (P138)
7Press 3/4 /2/ 1 to select a WEB service you want to connect, and then press 
[MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P145)
8Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P142)
9Select and send the images. (P153)
•
Images uploaded to the WEB Service cannot be displayed or deleted with this camera. Check 
images by accessing the WEB Service with your smartphone/tablet or computer.
•If sending images fails, a  report email outlining the failure will be sent to the email address registered 
with “LUMIX CLUB”.
•Images may contain personal information that can be used to identify the user, such as a 
title, the time and date when the images was taken, and the location where the image was 
taken. Check this information before uploading images to WEB services.
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB”  (P163) to send a picture to a WEB service.
To send images to a WEB service, you need to register the WEB service.
  (P166)
•Panasonic assumes no responsibility for the dama ges resulting from the leakage, loss, etc. 
of images uploaded on WEB services.
•When uploading images to the WEB Service, do not delete images from this camera, even 
after they have finished sending, until you have checked that they have been properly 
uploaded to the WEB Service. Panasonic assumes no responsibility for the damages 
resulting from the deletion of images stored in this unit. 
						

							- 157 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [AV device], and then press [MENU/SET].5Press  3/4  to select [Home] or [External], and then press [MENU/SET].6Press  3/4  to select connection method, and then press [MENU/SET].
7Press  3/4  to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P145)
8Press 3/4  to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi].  (P142)
9Select and send the images. (P153)
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•Registration to “LUMIX CLUB” (P163)•Address number and access number acquired by the destination External AV device.  (P167)
[Via Network]When you want to connect to an AV device via a wireless access point. 
(P138)
[Direct]
•This can be 
selected only 
when 
[Home] is 
selected.
When you want to directly connect an AV device to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P140) 
						

							- 158 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press  3/4  to select [Printer], and then press [MENU/SET].
5Press  3/4  to select connection method, and then press [MENU/SET].
6Press  3/4  to select a printer you want to connect, and then press [MENU/SET].7Select pictures, and then print.  (P184)
•To change the setting or disconnect, press [Wi-Fi].  (P142)
•Motion pictures cannot be printed out.
When sending images to Printer
Preparations:
•
You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)¢ printer.
¢ Compliant with the DPS over IP standards.
See the following website for information on the PictBridge (wireless LAN-compatible) printer.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English only.)
[Via Network]When you want to connect to your Pr inter via a wireless access point. 
(P138)
[Direct]When you want to directly connect your printer to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P140) 
						

							- 159 -
Wi-Fi
To transfer images automatically ([Smart Transfer])
Transfer recorded images to a PC, an AV device or a Cloud Folder automatically.
•When [Auto Transfer] is set to [ON], the camera automatically uploads recorded images. For this 
reason images may be uploaded unintentionally if, for example, you share this unit with other 
people. Panasonic assumes no responsibility for any damages caused by uploaded images.
•Panasonic assumes no responsibility for any damages caused by the use of [Smart Transfer].
•When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to  [ON], and 
turn off the camera because electromagnetic waves, etc. emitted by the camera may interfere with 
gauges. (P48)
∫What you can do with [Smart Transfer]
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P44)2Press  3/4  to select [Smart Transfer], and press [MENU/SET].
3Press  3/4  to select the transfer destination, and press [MENU/SET].4Select the method for connecting to a wireless access point, and set.
•Refer to P138 for details.
5Set the transfer destination.
6Press  3/4  to select [Auto Transfer], and press [MENU/SET].7Press  3/4  to select [ON], and press [MENU/SET].
•Only the images you recorded when [Auto Transfer] is set to [ON] is transferred.
[Auto Transfer] Automatically transfer images during charging.  (P160)
[Transfer Now]Transfer images to the preset destination immediately.  (P160)
[Set Destination]Change the transfer destination or settings of images.  (P161)
[Charge Priority]Set priority to charge or transfer.  (P162)
[Display Log]Display the dates when images were sent automatically and the send results. 
(P162)
Configuring [Smart Transfer]
[PC] setting
•
For details about the preparations before the transfer, refer to “When sending images to 
PC” on P146 .
1Press  3/4  to select a PC you want to connect, and then press [MENU/SET].
2 Press  3/4  to select the folder you want to send, and then press [MENU/SET].
[Cloud Sync. Service]  setting •
For details about the preparations before the transfer, refer to “When sending images to 
[Cloud Sync. Service]” on  P148.
[AV device]  setting
•
For details refer to “When sending images to AV device” on  P150.•Select the AV device you want to connect to, and press [MENU/SET] . 
						

							- 160 -
Wi-Fi
Preparation: Configure [Smart Transfer] in advance. (P159)1Turn off the camera.
2(When using a power outlet)
Connect the AC adaptor (supplied) and this camera with the USB connection cable 
(supplied), and insert the AC adaptor (supplied) into the power outlet.
(When using a PC)
Connect this unit to a PC by using the USB connection cable (supplied).
•
[Smart Transfer] starts automatically according to the [Charge Priority]  (P162) setting.•[Smart Transfer] is not available when the memory card is locked.
•Depending on the specifications of the PC, [Smart Transfer] may fail.
•Except at the ambient temperatures between 0 oC and 40 oC (32  oF and 104 o F), [Smart Transfer] 
may not work.
•When [Destination] is set to [PC], images are saved in the folder you have created for receiving. 
(P147)
•If there are images that are not transferred when [Auto Transfer] is set to [OFF], the message that 
confirms whether to transfer these images is displayed. Select a desired option.
∫ Transfer images instantly
Preparation: Configure [Smart Transfer] in advance.  (P159)
1Connect the AC adaptor (supplied) and this camera with the USB connection cable 
(supplied), and insert the AC adaptor (supplied) into the power outlet.
•
Switch to Playback Mode.
2Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P44)
3Press 3/4  to select [Smart Transfer], and press [MENU/SET].4Press  3/4  to select [Transfer Now], and press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Performing smart transfer