Panasonic Digital Camera Dmc Sz9 Owners Manual For Advanced Features

							- 141 -
Wi-Fi
Playback on TV
You can display pictures on a TV that supports the Digital Media Renderer (DMR) function of 
the DLNA standard.
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the 
connection destination from [History Connection]  (P135) or 
[Favorite Connection]  (P136).
3Press 3/4  to select [Playback on TV], and then press [MENU/
SET].
4Press  3/4  to select connection method, and then press 
[MENU/SET].
5Press  3/4  to select a device you want to connect, and then press [MENU/SET].
•When the connection is established, the screen is displayed.
6Take or play back pictures on this unit.
•To change the setting or disconnect, press [Wi-Fi].  (P142)
Displaying the picture on TV right after taking it/Displaying the picture on 
TV by playing it back on the camera
Preparations:
Set the TV to DLNA waiting Mode.
•Read the operating instructions for your TV.•For details on compatible devices, refer to the support sites below.
http://panasonic.jp/support/global/cs/dsc/(This Site is English only.)
[Via Network]When you want to connect to your TV via an wireless access point. 
(P138)
[Direct]When you want to directly connect your TV to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P140) 
						

							- 142 -
Wi-Fi
•Motion pictures cannot be played back.•During the multi/calendar playback, pictures displayed on the screen of this unit are not displayed on 
TV.
•When a TV is connected to this unit, the TV screen may temporarily return to the status before the 
connection. Pictures are displayed again when you take or play back pictures.
•[Effect] and [Sound] of the Slide Show are disabled.
1Press [Wi-Fi] when connected to Wi-Fi.2Press  3/4  to select the item, and press [MENU/SET].
¢ Excluding [Playback on TV]/[Send Images Stored in the Camera] ([Printer])
What you can do with the [Wi-Fi] button when connected to Wi-Fi
ItemDescription of settings
[Terminate the Connection]Terminates the Wi-Fi connection.
[Change the Destination]Terminates the Wi-Fi connection, and allows you to 
select a different Wi-Fi connection.
[Change Settings for Sending 
Images]¢Refer to  P145 for details.
[Register the Current Destination to 
Favorite]Registering the current connection destination or the 
connection method, you can  easily connect with the 
same connection method next time.
[Network Address]Displays the MAC address and IP  address of this unit. 
						

							- 143 -
Wi-Fi
Send Images While Recording
A picture can be automatically sent to a specified device every time you take it.
Since the camera gives priority to recording,  sending may take longer during the recording.
•
Motion pictures cannot be sent.•If you turn off this unit or the Wi-Fi connection  before sending is complete, unsent pictures will not be 
resent.
•You may not be able to delete files or use the playback menu while sending.•When sending images on a mobile network, high packet communication fees may be incurred 
depending on the details of your contract.
1Press [Wi-Fi].
2Press  3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images While Recording], and then press [MENU/SET].
4Press  3/4  to select [Smartphone], and then press [MENU/SET].5Selecting the connection method. (P144)6Press  3/4  to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P145)
7Take pictures.
•The pictures are sent automatically after taking them.•To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to smartphone/tablet
Preparations:
•
Install the “ Image App ” in advance.  (P132) 
						

							- 144 -
Wi-Fi
∫When you want to connect to the smartphone/tablet via a wireless access point(On your smartphone/tablet)
1On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.2Select the wireless access point you want to connect to, and set.3Start “ Image App ” on your smartphone/tablet.¢ (P132)(On the camera)
4Press  3/4  to select [Via Network], and then press [MENU/SET].5Select the method for connecting to a wireless access point, and set.
•Refer to P138 for details.
∫ When you want to directly connect the smartphone/tablet to this unit
•When connecting with [Wi-Fi Direct] or [WPS Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
•For details on the connection methods, refer to  P140.
(On your smartphone/tablet)2Start “ Image App ” on your smartphone/tablet.¢ (P132)
•When connecting with [Manual Connection]
(On the camera)
1Press  3/4  to select [Direct], and then press [MENU/SET].
2Press  3/4  to select [Manual Connection], and then press 
[MENU/SET].
(On your smartphone/tablet)
3On the setting menu of your smartphone/tablet, turn on the 
Wi-Fi function.
4Select the SSID that matches the one displayed on the screen of 
this unit, and then enter the password.
5Start “ Image App ” on your smartphone/tablet.¢  (P132)¢ A window indicating that the smartphone/tablet is connecting to the camera is displayed. If you 
are using an Android device, press the back key. If you are using an iOS device, close the 
window.
Selecting the method for connecting to the smartphone/tablet 
						

							- 145 -
Wi-Fi
Press 3/4  to select the item, and press [MENU/SET].
Changing the settings for sending images
ItemDescription of settings
[Size] Resize the image to send.
When [Send Images While Recording] is selected:
[Original]:
Send the image without changing the size.
[Change (1M-2M)]: Resize the image before sending it.
When [Send Images Stored in the Camera] is selected:
[Original]: Send the image without changing the size.
[Auto]
¢ 1: The image size is determined by the circumstances 
at the destination.
[Change]: You can select the picture size from [M] or [S].
The aspect ratio does not change.
[Delete Location Data]¢2
Select whether to delete the location information from images before 
sending them.
[ON]: Delete the location information, then send.
[OFF]: Keep the location information and send.
•This operation only deletes the location information from the images 
that are set to be sent. (The location information will not be deleted from 
the original images stored in this unit.)
[Cloud Limit]¢3
You can select whether to send images when the Cloud Folder runs out 
of free space.
[ON]: Do not send images.
[OFF]: Delete images from the oldest ones, then send new 
images.
¢ 1 Only available when the destination of [Send Images Stored in the Camera]  is set to [Web 
service] .
¢ 2 Only available when the destination of [Send Images Stored in the Camera]  is set to  [Cloud 
Sync. Service], [Web service] or  [External]  in [AV device].
¢ 3 Only available when the destination is set to [Cloud Sync. Service]. 
						

							- 146 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images While Recording], and then press [MENU/SET].4Press  3/4  to select [PC], and then press [MENU/SET].5Press  3/4  to select connection method, and then press [MENU/SET].
6Press  3/4  to select the PC you want to connect to, and then press [MENU/SET].7Press  3/4  to select the destinations folder of the PC, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P145)
8Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P142)
You cannot change the settings while sending pictures. Wait until sending is complete.
•Folders sorted by the sent date are created in the specified folder, and pictures are saved in those 
folders.
•If the screen for a user account and password entry appears, enter the one you set on your PC.
When sending images to PC
Preparations:
•
Turn the computer on.•Prepare folders for receiving images on the PC before sending a picture to the PC.  (P147)
•If the workgroup of the destination PC has been changed from the standard setting, you also need 
to change the setting of this unit in [PC Connection]. (P168)
[Via Network]When you want to connect to your PC via a wireless access point. 
(P138)
[Direct]When you want to directly connect your PC to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P140) 
						

							- 147 -
Wi-Fi
•Create a PC user account [account name (up to 254 characters) and password (up to 
32 characters)] consisting of alphanumeric characters. An attempt to create a receive folder may fail 
if the account includes non-alphanumeric characters.
∫When using “ PHOTOfunSTUDIO ”1Install “ PHOTOfunSTUDIO ” to the PC.
•For details on hardware requirements and installation, read “About the supplied software” 
(P177).
2Create a folder that receives images with “ PHOTOfunSTUDIO ”.
•To create the folder automatically, select [Auto-create]. To specify a folder, create a new folder, 
or set a password to the folder, select [Create manually].
•For details, refer to the operating instructions of “ PHOTOfunSTUDIO ” (PDF).
∫When not using “ PHOTOfunSTUDIO ”
(For Windows)
Supported OS: Windows XP/Windows Vista/Windows 7/Windows 8
Example: Windows 7
1Select a folder you intend to use for receiving, then right-click.2Select [Properties], then enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the operating system.
(For Mac)
Supported OS: OS X v10.4 to v10.8
Example: OS X v10.8
1Select a folder you intend to use for receiving, then click on the items in the 
following order.
[File]   [Get Info]
2Enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the operating system.
To create a folder that receives images 
						

							- 148 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images While Recording], and then press [MENU/SET].4Press  3/4  to select [Cloud Sync. Service], and then press [MENU/SET].
5Press [MENU/SET].6Press  3/4  to select [Via Network], and then press [MENU/SET].7Press  3/4  to select connection method, and then press [MENU/SET].  (P138)
8Check the send setting.
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.]. (P145)
9Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P142)
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB”  (P163) and configure the Cloud Sync. setting to send a 
picture to a Cloud Folder.
∫ About the images sent to a Cloud Folder by the use of [Cloud Sync. Service] 
(As of January 2013)
To send images to a Cloud Folder, Cloud Sync. setting is required. Configure the settings on a 
PC with “ PHOTOfunSTUDIO ” or on a smartphone/tablet with “ Image App ”.
•
If you set the picture destination to [Cloud Sync. Service], sent pictures are temporarily saved in the 
cloud folder, and they can be synchronized with the device in use, such as the PC or smartphone/
tablet.
•A Cloud Folder stores transferred images for 30 days (up to 1000 pictures). Transferred images are 
deleted automatically 30 days after the transfer. Furthermore, when the number of stored images 
exceeds 1000, some images may be deleted depending on the [Cloud Limit]  (P145) setting even 
within 30 days after the transfer.
•When the download of images from a Cloud Folder to all specified devices is complete, images 
may be deleted from the Cloud Folder even within 30 days after the transfer. 
						

							- 149 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images While Recording], and then press [MENU/SET].4Press  3/4  to select [Web service], and then press [MENU/SET].
5Press  3/4  to select [Via Network], and then press [MENU/SET].6Press  3/4  to select connection method, and then press [MENU/SET].  (P138)7Press 3/4 /2/ 1 to select a WEB service you want to connect, and then press 
[MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P145)
8Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P142)
You cannot change the settings while sending pictures. Wait until sending is complete.
•Images uploaded to the WEB Service cannot be displayed or deleted with this camera. Check 
images by accessing the WEB Service with your smartphone/tablet or computer.
•If sending images fails, a  report email outlining the failure will be sent to the email address registered 
with “LUMIX CLUB”.
•Images may contain personal information that can be used to identify the user, such as a 
title, the time and date when the images was taken, and the location where the image was 
taken. Check this information before uploading images to WEB services.
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB”  (P163) to send a picture to a WEB service.
To send images to a WEB service, you need to register the WEB service.
  (P166)
•Panasonic assumes no responsibility for the dama ges resulting from the leakage, loss, etc. 
of images uploaded on WEB services.
•When uploading images to the WEB Service, do not delete images from this camera, even 
after they have finished sending, until you have checked that they have been properly 
uploaded to the WEB Service. Panasonic assumes no responsibility for the damages 
resulting from the deletion of images stored in this unit. 
						

							- 150 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4 /2/ 1 to select [New Connection], and then 
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination 
from [History Connection]  (P135) or [Favorite Connection] (P136) .
3Press 3/4  to select [Send Images While Recording], and then press [MENU/SET].4Press  3/4  to select [AV device], and then press [MENU/SET].
5Press  3/4  to select [Home] or [External], and then press [MENU/SET].6Press  3/4  to select connection method, and then press [MENU/SET].
7Press  3/4  to select a device you want to connect, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press 
[DISP.].  (P145)
8Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P142)
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•Registration to “LUMIX CLUB”.  (P163)•Address number and access number acquired by the destination External AV device.  (P167)
[Via Network]When you want to connect to an AV device via a wireless access point. 
(P138)
[Direct]•This can be 
selected only 
when 
[Home] is 
selected.
When you want to directly connect an AV device to this unit with [Wi-Fi 
Direct], [WPS Connection], or [Manual Connection].  (P140)