Panasonic Digital Camera Dmc Sz9 Owners Manual For Advanced Features

							- 111 -
Playback/Editing
Apply effects similar to that of aesthetics or makeup to brighten up any face.
1Press 2/1 to select a picture, and then press 3 .
•If you have filtered images for playback by using [Slide Show]   (P104) or [Filtering Play]  
(P106) , the selection screen appears. You can proceed to step 
2 by selecting  [Retouch] with 
3 /4 , and then pressing  [MENU/SET].
•You can also proceed to step 2 by selecting [Retouch] from the [Playback] menu.
2Press 3/ 4 to select [Beauty Retouch], and then press [MENU/SET].
3Press 2/1 to select the face of the person to edit, and 
then press [MENU/SET].
•Only a person with an arrow can be selected.
(If only one person is detected, press [MENU/SET].)
4Press 3/ 4 to select the item, and then press  1.
Select effects from each of the following items.
5Press 3/4 to select the effect.
•To continue to add different effects, press  2, and repeat steps 4 and 5.
[Beauty Retouch]
ItemDescription of settings
[]([Aesthetic Retouch])
Displays skin more clearly, limits reflections, and 
displays eyes and teeth with a whiter hue.
This item can also make faces look sharper and eyes 
look brighter and bigger. 
[]([Foundation])Set the tone of foundation makeup.
[]([Make Up Retouch])Provides a more colorful look to people in photos by 
enhancing lip gloss, eye makeup, and cheek 
touch-ups. Five different effects can be selected.
[] ([Smile])Give the subject a smile.
OFF
LOW STD.
HIGH 
						

							- 112 -
Playback/Editing
6After finishing the picture editing, press [MENU/SET].
•Confirmation screen is displayed. Selecting [Yes] displays images before application and 
after application.
7Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
•Two or more people may not be edited at once. Save the picture first, and then select the next 
person.
•The brightness and color of pictures you are checking before saving may differ to the actual picture 
that is saved.
•The following pictures cannot be processed:
–Motion pictures–Pictures taken in Panorama Shot Mode–Pictures taken with [3D Photo Mode] in Scene Mode
•Intended retouching may not be possible when the face detection is not performed properly.•When a subject is wearing glasses, the desired retouch may not be possible.•When a picture is bright due to reflected light from a flash or the sun, the retouching effect may be 
less pronounced.
•To take pictures appropriate for [Beauty Retouch]:–Record a large, frontal view of the face
–Avoid taking pictures in a very dark place–Clearly record the part you intend to retouch•Reallusion is a trademark of Reallusion Inc. 
						

							- 113 -
Playback/Editing
You can add your desired effects to the pictures that you have taken.
1Press 2/1 to select an picture, and then press  3.
•If you have filtered images for playback by using [Slide Show]   (P104) or [Filtering Play]  
(P106) , the selection screen appears. You can proceed to step 
2 by selecting  [Retouch] with 
3 /4 , and then pressing  [MENU/SET].
•You can also proceed to step 2 by selecting [Retouch] from the [Playback] menu.
2Press 3/ 4 to select [Creative Retouch], and then press [MENU/SET].
3Press 3/4 to select image effects and then press [MENU/SET].
•You can select the item from the following options that are also available in the Creative 
Control mode.
[Expressive]/[Retro]/[High Key]/[Low Key]/[Sepia]/[Dynamic Monochrome]/[Impressive Art]/
[High Dynamic]/[Cross Process]/[Toy Effect]/[Miniature Effect]/[Soft Focus]/[Star Filter]/[One 
Point Color]
•A brief description of selected image effect appears when you press [DISP.].
•Read P67–70 for details on the respective effects.
•To set the color you want to keep by using [One Point Color], move 
the frame at the center of the screen to the desired color with  3/4/
2 /1 , and then press [MENU/SET].
•If you select [OFF], an image with no effect is displayed. To proceed 
the retouch operation, select another image effect. If you are not 
going to add any effect, exit the menu.
•Confirmation screen is displayed. It is executed when [Yes] is selected.
•The image effect may appear weak compared to the effect given by the Creative Control Mode.•The following pictures cannot be processed:–Motion pictures
–Pictures taken in Panorama Shot Mode–Pictures taken with [3D Photo Mode] in Scene Mode
[Creative Retouch] 
						

							- 114 -
Playback/Editing
Using the [Playback] Menu
•With [Text Stamp], [Retouch], [Resize] or [Cropping], a new edited picture is created. A new picture 
cannot be created if there is no free space on the built-in memory or the card so we recommend 
checking that there is free space and then editing the picture.
The location information (longitude/latitude) acquired by the smartphone/tablet can be sent to 
the camera and written in images.
•
Pictures in the built-in memory cannot store location information. If you want to record location 
information on them, copy the pictures in the built-in memory to a memory card, then perform 
[Location Logging].
Preparation:
Sending location information to the camera from the smartphone/tablet.  (P134)
1Press 2/1 to select pictures.
2Select [Location Logging] on the [Playback] menu. (P44)
3Press 3/ 4 to select [Add Location Data] and then press [MENU/SET].
4Press 3/4 to select the period you intend to record location information 
on pictures, then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
•The location information is recorded onto images.•Images with location information are indicated with [ ].
∫ To pause the recording of location information
Press [MENU/SET] while recording of the location information onto pictures is taking 
place.
•
During a suspended period, [ ±] is displayed.
Select the period with [ ±] to restart the recording process from the picture you left off.
∫ To delete the received location information
1Select [Location Logging] on the [Playback] menu. (P44)2Press  3/4  to select [Delete Location Data] and then press [MENU/SET].3Press  3/4  to select the period you want to delete, then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
[Location Logging] 
						

							- 115 -
Playback/Editing
•Location information can be written only to images taken on this camera.•Location information is not written onto the images that are recorded after [Send location data]. 
(P134)
•
Location information is not written onto the images recorded when [Rec Format] is set to [AVCHD].•When there is insufficient free space on the card, location information might not be able to be written.•When the card is locked, location information cannot be written onto the images or received location 
information cannot be deleted.
You can add text (comments) to pictures. After text has been registered, it can be stamped in 
prints using [Text Stamp]  (P116).
1Select [Title Edit] on the [Playback] menu.  (P44)
2Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
4Enter the text.  (P80)
•Exit the menu after it is set.
•To delete the title, erase all the text in the text input screen.•You can print out texts (comments) using the “ PHOTOfunSTUDIO ” bundled software on the 
CD-ROM (supplied).
•You can set up to 50 pictures at one time in [MULTI].•You cannot use [Title Edit] for the following pictures.
–Motion pictures–Pictures taken with [3D Photo Mode] in Scene Mode–Pictures recorded with other equipment
[Title Edit]
3Select the picture, and then press 
[MENU/SET] to set.
•[’] is displayed for pictures with titles already 
registered.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is pressed 
again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/ 2/1 to 
select the pictures.
46
2
31
5 
						

							- 116 -
Playback/Editing
You can stamp the recording date/time, name, location or travel date onto the recorded 
pictures.
1Select [Text Stamp] on the [Playback] menu. (P44)
2Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
4Press 3/4 to select [Set], and then press [MENU/SET].
5Press 3/4 to select text stamp items, and then press [MENU/SET].
[Text Stamp]
3Select the picture, and then press 
[MENU/SET] to set.
•[‘ ] is displayed on pictures already with date 
or text stamped.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is pressed 
again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/ 2/1 to 
select the pictures.
46
2
31
5 
						

							- 117 -
Playback/Editing
6Press 3/4 to select the settings, and then press [MENU/SET].
7Press [ ].
8Press 3 to select [OK], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
ItemSetting item
[Shooting Date]
[W/O TIME]:Stamp the year, month and day.
[WITH TIME]:Stamp the year, month, day, hour and minutes.
[OFF]
[Name] []
([Face 
Recognition])
:Stamps names registered in name settings for 
[Face Recog.].
[]
([Baby/Pet]):Stamps names registered in name settings for 
[Baby1]/[Baby2] or [Pet] in Scene Mode.
[OFF]
[Location]
[ON]:Stamps the travel destination name set under 
[Location].
[OFF]
[Travel Date][ON]:Stamps the travel date set under [Travel Date].
[OFF]
[Title][ON]:Title input in the [Title Edit] will be stamped.
[OFF] 
						

							- 118 -
Playback/Editing
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].
•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before printing.•When text is stamped onto the 0.3M pictures, it is difficult to read it.
•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures taken in Panorama Shot Mode
–Pictures taken with [3D Photo Mode] in Scene Mode–Pictures recorded without setting the clock–Pictures with date or text stamped
–Pictures recorded with other equipment
You can add the effect of  [Auto Retouch], [Beauty Retouch], or [Creative Retouch] to recorded 
pictures .
•
For details, refer to P110–11 3 .
[Retouch] 
						

							- 119 -
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to divide 
a part you need with a part you do not need.
It cannot be restored once divided.
•
[Video Divide] may not be performed on motion pictures recorded with other equipment.•Motion pictures cannot be divided at a location close to the start or end of the motion picture.
•With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictur es by using [Calendar] or [Video Only] in the 
[Filtering Play].
•Motion pictures with a short recording time cannot be divided.
[Video Divide]
1Select [Video Divide] on the [Playback] menu. (P44)
2Press 2/ 1 to select the motion picture to divide, and then press [MENU/
SET].
3Press 3 at the location to divide.
•Motion picture is played back from the same location when  3 is 
pressed again.
•You can finely adjust the location for division by pressing 2 /1 while 
the motion picture is paused.
4Press 4.
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed while processing the dividing.
3s 3s
3s 
						

							- 120 -
Playback/Editing
To allow easy posting to web pages, attachment to email etc., picture size (number of pixels) is 
reduced.
1Select [Resize] on the [Playback] menu. (P44)
2Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.
•It may not be possible to resize pictures recorded with other equipment.•The following images cannot be resized.–Motion pictures
–Pictures taken in Panorama Shot Mode–Pictures taken with [3D Photo Mode] in Scene Mode–Pictures with date or text stamped
[Resize]
3Select the picture and size.
[SINGLE] setting1Press 2/1  to select the picture, and then press [MENU/
SET].
2Press  2/1  to select the size, and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed.
[MULTI] setting1Press  3/4  to select the size, and then press [MENU/SET].2Press  3/4 /2 /1 to select the picture, and then press 
[DISP.].
•
Repeat this step for each picture, and press [MENU/SET] to set.•Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed.
3
46
2
31
5