Panasonic Digital Camera Dmc Lx100 Owners Manual For Advanced Features

							271SQW0021
Wi-Fi
About connections
Changing the settings for sending images
After you have completed connecting, you can change the sending settings, such as the 
size of pictures to be sent, by pressing the [DISP.] button.
ItemDescription
[Size] Resize the image to send.
[Original] / [Auto]
*1 / [Change] • If you select [Auto], the image size is determined by the 
circumstances at the destination.
 • You can select 

the image size for [Change] from [M], [S], or [VGA]. 
The aspect ratio does not change.
[File Format]
*2[JPG] / [RAW+JPG] / [RAW]
[Delete Location Data]
*3
Select whether to delete the location information from images before 
sending them.
[ON]:
 
  
Delete the location information, then send.
[OFF]: 

 
Keep the location information and 
 send.
 • This operation only deletes the location information from the images that are set to be sent. (The location information will not 
be deleted from the original images stored in this unit.)
[Cloud Limit

]
*4You can select whether to send images when the Cloud Folder runs 
out of free space.
[ON]:
 
  
Do not send images.
[OFF]: 

 
Delete images from t
 he oldest ones, then send new images.
*1 Only available when the destination is set to [W eb service].*2   Only available when the destination is set to [PC].*3   Only available when the destination for [Send Images Stored in the Camera ] is set to [Cloud Sync. 
Service] or [Web service].
*4 Only available when the destination is set to [Cloud Sync. Service ].      
						

							272SQW0021
Wi-Fi
[Wi-Fi Setup]
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → Desired setting
ItemDescription
[LUMIX CLUB]
Acquires or changes the 
“LUMIX CLUB” login ID.
 • For details (→258)
 .
[PC Connection]
You can set the workgroup. You must connect to the same workgroup as the destination 
computer when sending pictures to the computer. 
(The default is set to “WORKGROUP”)
[Change Workgroup Name]: 
Enter the workgroup of the connecting computer. Close the menu 
after changing settings.
[Restore to Default]: 
Returns settings to default settings. A confirmation screen is 
displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
 • Refer to “Entering T

ext” (→52) for information on how to enter 
text.
 • To use with a computer of the standard settings, you do not have  to change the workgroup.
[Device Name

]
You can change the name of 
this unit.
  Press [DISP.] button  Enter the desired device name • Refer to “Entering T ext” (→52) for information on how to enter 
text.
 • Up to 32 characters can be entered.
[NFC Operation]
Makes NFC function setting. [ON]:

 The NFC function works.
[OFF]
[Touch Sharing]
Set the operation to be 
performed when a Wi-Fi 
connection is established 
using the NFC function. [ON]:
 

 
When a Wi-Fi connection is established using the NFC 
function while playing back a single picture, the picture 
(1
 picture) is transferred.
[OFF]      
						

							273SQW0021
Wi-Fi
[Wi-Fi Setup]
ItemDescription
[Wi-Fi Password]
To prevent incorrect operation 
or use of the Wi-Fi function 
by a third party and to protect 
saved personal information, 
it is recommended that you 
protect the Wi-Fi function with 
a password. Setting a password will automatically display the password input 
screen when the Wi-Fi function is used.
[Setup]:
Enter any 4-digit numbers as the password. Close the menu after 
changing settings.
[Delete]:
A confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed.
 • For details on how to enter characters, refer to “Entering T

ext” 
(→52).
 • Make a copy of password. If you forget the password, you can  reset it with [Reset Wi-Fi Settings] in the [Setup] menu, however 
other settings will also be reset. (excluding [

LUMIX CLUB])
[Network Address]
Displays the MAC address and 
IP address of this unit.
 • A “MAC 

Address” is a unique address that is used to identify 
network equipment.
 • “IP address” refers to a number that identifies a PC connected to  a network such as the Internet. Usually

, the addresses for homes 
are automatically assigned by the DHCP function such as a 
wireless access point. (Example: 192.168.0.87)
[Approved Regulations]
*The authentication number is 
displayed. –
* [Approved Regulations] is only available on the version DMC-LX100P      
						

							274SQW0021
Connecting with other devicesEnjoying 4K motion pictures
Viewing 4K motion pictures
 ■Viewing on TV screen
When you connect this unit to a 4K-compatible TV and play 
back a motion picture recorded with [Rec Quality] of [4K], 
you can enjoy high-resolution 4K motion pictures. Although 
resolution output will be lower, you can also play back 4K 
motion pictures by connecting to a high-definition TV and 
other devices that do not have 4K support.
Preparation
When motion pictures are recorded in [Rec Quality] with [4K], set [HDMI Mode] (→48) to [AUTO] 
or [4K].
  Connect this unit to a 4K-compatible TV using an HDMI micro cable and display the 
playback screen  (→276)
 • When the [VIERA  Link] setting on the camera is set to [ON] and the camera is connected to 
a VIERA Link (HDMI)-compatible Panasonic television (VIERA), the television automatically 
switches its input and the playback screen is displayed. For details, refer to  (→278).
 • You can also play back motion pictures by inserting the card in a 
4K-compatible 

TV equipped with a SD card slot.
 • Read the operating instructions for the TV

.
 ■Viewing 4K motion pictures on a PC screen
To play back motion pictures recorded with [Rec Quality] of [4K] 
on a PC, use the software “PHOTOfunSTUDIO” stored in the DVD 
(supplied).
 • To play back and edit 4K motion pictures, a high-performance PC environment is required.
 • For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).     
						

							275SQW0021
Connecting with other devices
Enjoying 4K motion pictures
Storing 4K motion pictures
 ■Storing 4K motion pictures on your PC
Still/motion pictures can be copied from the camera to your computer by connecting the 
two together. For details, refer to (→280).
 ■Storing 4K motion pictures on a DVD
You cannot transfer or copy motion pictures recorded in [Rec Quality] with [4K] to a 
Blu-ray disc or DVD using a Panasonic recorder. (Current as of October 2014)
You can use the supplied DVD software “PHOTOfunSTUDIO” to convert the file size of 
a motion picture to a smaller size or copy it to a DVD.
 • For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).      
						

							276SQW0021
Connecting with other devices
Viewing on TV screen
You can view pictures on a TV screen by connecting your camera to your TV with the 
HDMI micro cable or AV cable (optional).
Preparation
Turn off both camera and TV.
1Connect camera to TV
Check the plug direction and insert it straight in. (If the cable is inserted in the wrong 
direction, the plug could become deformed and cause faulty operation) Also, do not 
insert into the wrong socket. Doing so may cause damage to this unit.
 ■To connect with an HDMI micro cable
An HDMI micro cable can be used to enable viewing of still and motion pictures in 
high-resolution.
Align the marks, and insert. [HDMI] socketTo HDMI video/audio 
input socket
HDMI micro cable
Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not 
comply with the HDMI standards will not work.  
“High Speed HDMI micro cable” (Type
 D-T

ype
 A plug, up to 2 m (6.6 feet) long)
 ■To connect with an AV cable (optional)
Align the marks, and insert. [AV OUT/DIGITAL] socket 
AV cable (optional)
Yellow: 
To video socket
White: 
To audio socket
*
*Monaural audio output.
2Turn on the TV and switch the TV input source to match the 
connection socket
3Turn on the camera and press the playback button      
						

							277SQW0021
Connecting with other devices
Viewing on TV screen
 ■To connect with an HDMI micro cable ●Check the [HDMI Mode]. (→48) ●To play back 24p motion pictures, set [HDMI Mode] to [AUTO]. Otherwise, the picture is not 
output at 24 frames per second.
 ●Bars may appear at the sides or at the top and bottom of the screen, depending on the aspect 
ratio setting.
 ●Cables that do not comply with HDMI standards will not work. ●When an HDMI micro cable is connected, pictures are not displayed on the screen. ●HDMI output will be canceled if a USB connection cable (supplied) is connected simultaneously. ●When the AV cable (optional) and HDMI micro cable are connected at the same time, no picture 
is output from the AV cable.
 ●Pictures may be momentarily distorted immediately after commencing playback or pausing on 
certain televisions. 
 ●Audio output is stereo. ●Read the operating instructions for the TV.
 ■To connect with an AV cable (optional) ●Check the [TV Aspect]. (→47) ●Always use a genuine Panasonic AV cable (DMW-AVC1: optional). ●Pictures rotated to portrait may be blurred slightly. ●Change picture mode settings on TV if aspect ratios are not displayed correctly on widescreen 
or high-definition televisions.
 ●The viewfinder display cannot be used. ●Read the operating instructions for the TV.
The recorded pictures can be played back on a TV with an SD 
Memory Card slot
 ●Proper playback (aspect ratio) will be dependent on the TV used for viewing. ●The file format of the motion pictures that can be played back differs depending on the 
TV model.
 ●You may not be able to play back panorama pictures. Also you cannot perform 
automatic scrolling playback of panorama pictures. 
 ●For cards compatible with playback, refer to the operating instructions of the  TV.      
						

							278SQW0021
Connecting with other devices
Viewing on TV screen
VIERA Link (HDMI) (HDAVI Control™)
What is VIERA Link (HDMI)? ●VIERA Link is a function that automatically links this camera to VIERA Link-
compatible devices by connecting HDMI micro cables for enabling easy operation 
with the VIERA remote control. (Some operations are not available.)
 ●VIERA Link (HDMI) is an exclusive Panasonic function added to the industry-
standard HDMI control functions known as HDMI CEC (Consumer Electronics 
Control). Operation is not guaranteed when connecting with non-Panasonic HDMI 
CEC-compatible devices. Refer to your product manual to verify compatibility with 
VIERA Link (HDMI).
 ●This camera supports VIERA Link (HDMI) Version 5. This is the Panasonic standard 
that also supports previous Panasonic VIERA Link devices.
Preparation
Set [VIERA Link] to [ON] (→49).
1Connect the camera to a VIERA Link (HDMI)-compatible Panasonic television 
(VIERA) with an HDMI micro cable (→276)
2Turn on the camera and press the playback button
3Operate with the remote control for the TV • Operate with reference to the operation icons displayed on the screen.      
						

							279SQW0021
Connecting with other devices
Viewing on TV screen
 ■Other related operations
Turning the unit OFF
 • The camera can also be turned off when the television is turned of
f with the remote 
control.
Automatic input select
 • This function automatically switches the television input to the camera screen  whenever the camera is turned on while it is connected via the HDMI micro cable. 
The television can also be switched on via the camera from Standby Mode   
(if “Power on link” on the television is set to “on”).
 • If VIERA Link (HDMI) does not function correctly  (→323)
 ●Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the 
HDMI standards will not work. 
 “High Speed HDMI micro cable” (Type
 D-T

ype
 A plug, up to 2 m (6.6 feet) long) ●If you do not know if your TV is VIERA Link (HDMI) compatible, see the TV’s operating 
instructions.
 ●Cables that do not comply with HDMI standards will not work. ●When VIERA Link is activated, the [HDMI Mode] setting of this unit is automatically recognized. ●If the [VIERA Link] setting on the camera is [ON], operations via the camera buttons will be limited. ●Ensure that the television you are connecting to has been set up to enable VIERA  Link (HDMI) 
(consult your television operating instructions for details).      
						

							280SQW0021
Connecting with other devices
Storing recorded still pictures and motion pictures 
on your PC
Still/motion pictures can be copied from the camera to your computer by connecting the 
two together.
 • Some computers can read directly from the camera’s memory card. For details, see the instruction manual for your computer

.
 • If your computer does not support SDXC Memory Cards, a message will be displayed requesting you to format the card. (Do not format the card. This will erase recorded 
pictures.)  
If the card is not recognized, refer to the following support website.  
http://panasonic.net/avc/sdcard/information/SDXC.html
 ■Computer specifications
You can connect the camera to a computer that can detect a mass storage device 
(device that stores a large volume of data).
 • Windows: Windows 8.1 / Windows 8 / Windows 7 / Windows Vista • Mac: OS X v10.5 - v10.9
Some motion pictures recorded in [AVCHD] may not be scanned 
correctly by copying a file or folder
 ●When using Windows, be sure to use the “PHOTOfunSTUDIO” software on the 
supplied DVD to copy motion pictures recorded in [AVCHD].
 ●When using Mac, you can copy motion pictures recorded in [AVCHD] using “iMovie”. 
Note, however, that it may not be possible to copy pictures depending on the picture 
quality settings. 
(For details about iMovie, please contact Apple Inc.)