Panasonic Digital Camera Dmc Lx100 Owners Manual For Advanced Features

							251SQW0021
Wi-Fi
Using WEB services
Through “LUMIX CLUB”, you can send still pictures and motion pictures to social 
networking services, etc. By selecting the setting to automatically transfer still pictures 
and motion pictures to [Cloud Sync. Service], you can receive the transferred still pictures 
and motion pictures on a PC or a smartphone.
Wireless access pointWEB services
Cloud 
synchronization 
services
LUMIX CLUB
When sending images to WEB service
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD
[Send Images While Recording] (→253) ○–––
[Send Images Stored in the Camera] 
(→253) ○
–
○
*–
*  Excluding motion pictures recorded with [Rec Quality] of [4K] • Some images may not be played back or sent depending on the device. • For details about playback of pictures, check the WEB service to which you will send 
the pictures.
 • For more details about picture sending methods.  (→270)
Preparation
You need to register to “LUMIX CLUB” (→258) to send a picture to a WEB service.
To send images to a WEB service, you need to register the WEB service.  (→252)      
						

							252SQW0021
Wi-Fi
Using WEB services
 ●Images may contain personal information that can be used to identify the user, such as a 
title, the time and date when the images were taken, and the location where the image was 
taken. Check this information before uploading images to WEB services.
 ●Panasonic assumes no responsibility for the damages resulting from the leakage, loss, etc. 
of images uploaded on WEB services.
 ●When uploading images to the WEB service, do not delete images from this camera, even 
after they have finished sending, until you have checked that they have been properly 
uploaded to the WEB service. Panasonic assumes no responsibility for the damages 
resulting from the deletion of images stored in this unit.
 ●Images uploaded to the WEB service cannot be displayed or deleted with this camera. Check 
images by accessing the WEB service with your smartphone or computer .
 ●If sending images fails, a report email outlining the failure will be sent to the email address 
registered with “LUMIX CLUB”.
Registering the WEB service to “LUMIX CLUB”
When sending images to WEB services, the WEB service being used must be registered 
with the “LUMIX CLUB”.
 • Check the “FAQ/Contact us” on the following site for compatible WEB services.
http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation
Make sure that you have created an account on the WEB service you want to use, and have the 
login information available.
1Connect to the “LUMIX CLUB” site using a smartphone or computerhttp://lumixclub.panasonic.net/eng/c/
2Enter your “LUMIX CLUB” login ID and password and log in to the service
3If you have not registered your email address with “LUMIX CLUB”, register the 
email address
4Select the WEB service to be used for WEB service link settings and register it • Follow the instructions on the screen to register the service.      
						

							253SQW0021
Wi-Fi
Using WEB services
[Send Images While Recording]
1Set the menu
 → [New Connection] → [Send Images While Recording] → [Web service]
2Select [Via Network] and connect (→264)
3Select a WEB service you want to connect • When the connection is established, the confirmation screen for the transmission setting is 
displayed. Check the setting and press [MENU/SET]. T o change the send setting, press [DISP.] 
button. (→271)
4Take still pictures • To change the setting or disconnect, press [Wi-Fi] button.  (→226)
Y ou cannot change the settings while sending still pictures. Wait until sending is complete.
(You can also close the connection by pressing 
 →  [Setup] → [Wi-Fi] → 
[Wi-Fi Function] → [Yes].)
[Send Images Stored in the Camera]
1Set the menu
 → [New Connection] → [Send Images Stored in the Camera] 
→ [Web service]
2Select [Via Network] and connect  (→264)
3Select a WEB service you want to connect • When the connection is established, the confirmation screen for the transmission setting is 
displayed. Check the setting and press [MENU/SET]. T o change the send setting, press [DISP.] 
button. (→271)
4Select [Single Select] or [Multi Select]
[Single Select] Select the picture Press [MENU/SET]
[Multi Select]
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by [Multi Select] is  limited.00730074
007500760077
0072OK
 • A confirmation screen is displayed. If you select [Yes], the operation is executed. • To change the send setting, press [DISP .] button. 
 • To close the connection, select [

Exit].           
						

							254SQW0021
Wi-Fi
Using WEB services
 ■Quickly sending pictures in the camera to WEB services
Once you send a picture, you can send pictures to the WEB service as quickly and 
easily as using a smartphone, only when the environment for connecting to a wireless 
access point is available.
  Display the picture
  Use   to select [Yes] after pressing  
(When a group picture is being displayed, select 
[Upload(Wi-Fi)] → [Yes])
 • The camera is connected to the previously used wireless access 
point and the pictures are sent to the WEB service.*1, *2
Upload this image by Wi-Fi?Upload this image by Wi-Fi?
YesYesNoNo
*1  When no connection history is available for the wireless access point, proceed to the connection 
method selection screen. Select the connection method and connect the camera to a wireless 
access point. 
(→264)
*2  If you do not have a “LUMIX CLUB” login ID, proceed to the new login ID sign up screen. Get a 
login ID and set a password.  (→259)
Performing the operation for the first time
After you select [Yes] in step  above, the WEB service selection screen appears. Use     to select WEB services and press [MENU/SET]  Check the setting on the confirmation screen for the transmission setting and press 
[MENU/SET]
 • The picture is sent to the WEB service. • To change the transmission setting for the picture, press the [DISP.] button. 
(→271)
 • After the second time, the pictures are sent using the same WEB service and the same picture transmission settings as before.
 ●When pictures are displayed as a group, they are all sent. When a single picture in a group is 
displayed, only the picture being displayed is sent. 
 ●To change the transmission settings of a picture or to close the Wi-Fi connection, press the [Wi-Fi] 
button. You can also close the connection by pressing the Playback button or [MENU/SET] and 
selecting [Yes]. When you switch to Recording Mode, the Wi-Fi connection is closed.         
						

							255SQW0021
Wi-Fi
Using WEB services
When sending images to [Cloud Sync. Service]
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD
[Send Images While Recording] (→256) ○–––
[Send Images Stored in the Camera] 
(→257) ○
–
○
*–
*  Excluding motion pictures recorded with [Rec Quality] of [4K] • Some images may not be played back or sent depending on the device. • See the operating instructions of the destination device for more information about 
picture playback.
 • For more details about picture sending methods.  (→270)
Preparation
You need to register to “LUMIX CLUB” (→258) and configure the Cloud Sync. setting to send a 
picture to a Cloud Folder. Use “PHOTOfunSTUDIO” on a PC or “Image App” on a smartphone to 
configure the Cloud Sync. settings.
 ■About the images sent to a Cloud Folder by the use of [Cloud Sync. Service] 
(Current as of September 2014)
 • If you set the picture destination to [Cloud Sync. Service

], sent pictures are 
temporarily saved in the cloud folder, and they can be synchronized with the device 
in use, such as the PC or smartphone.
 • A Cloud Folder stores transferred images for 30 days (up to 1,000 pictures).  T

ransferred images are deleted automatically 30 days after the transfer . 
Furthermore, when the number of stored images exceeds 1,000, some images may 
be deleted depending on the [Cloud Limit] (→271) setting even within 30 days after 
the transfer.
 • When the download of images from a Cloud Folder to all specified devices is  complete, images may be deleted from the Cloud Folder even within 30 days after 
the transfer.      
						

							256SQW0021
Wi-Fi
Using WEB services
[Send Images While Recording]
1Set the menu
 → [New Connection] → [Send Images While Recording] 
→ [Cloud Sync. Service]
2Check the message and press [MENU/SET]
3Select [Via Network] and connect  (→264)
4Check the send setting • When the connection is established, the confirmation screen for the transmission setting is 
displayed. Check the setting and press [MENU/SET]. T o change the send setting, press [DISP.] 
button. (→271)
5Take still pictures • To change the setting or disconnect, press [Wi-Fi] button.  (→226)
Y ou cannot change the settings while sending still pictures. Wait until sending is complete.
(You can also close the connection by pressing 
 →  [Setup] → [Wi-Fi] → 
[Wi-Fi Function] → [Yes].)      
						

							257SQW0021
Wi-Fi
Using WEB services
[Send Images Stored in the Camera]
1Set the menu
 → [New Connection] → [Send Images Stored in the Camera] 
→ [Cloud Sync. Service]
2Check the message and press [MENU/SET]
3Select [Via Network] and connect  (→264)
4Check the send setting • When the connection is established, the confirmation screen for the transmission setting is 
displayed. Check the setting and press [MENU/SET]. T o change the send setting, press [DISP.] 
button. (→271)
5Select [Single Select] or [Multi Select]
[Single Select] Select the picture Press [MENU/SET]
[Multi Select]
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by [Multi Select] is  limited.00730074
007500760077
0072OK
 • A confirmation screen is displayed. If you select [Yes], the operation is executed. • To change the send setting, press [DISP .] button. 
 • To close the connection, select [

Exit].           
						

							258SQW0021
Wi-Fi
Using “LUMIX CLUB”
About the [LUMIX CLUB]
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the 
devices you are using, or transfer these images to WEB services.
Use the “LUMIX CLUB” when uploading pictures to WEB services.
 • You can set the same “LUMIX CLUB” login ID for this unit and a smartphone. (→261)
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
Please note;
 • The service may be suspended due to regular maintenance or unexpected problems,  and service contents may be changed or added to, without prior notice to the users.
 • The service may be stopped in whole or in part with a reasonable period of advance notice.      
						

							259SQW0021
Wi-Fi
Using “LUMIX CLUB”
Acquiring a new login ID ([New account])
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]
2Select [Set/Add Account]
3Select [New account] • Connect to the network. Proceed to the next page by pressing [MENU/SET]. • A confirmation screen will be displayed if a login ID has already been acquired for the camera. Select [Y
es] to acquire a new login ID, or [No] if you do not need to acquire a new login ID.
4Select the method for connecting to a wireless access point, and set • For details (→264) . • The settings screen will only appear during the first connection. Connection methods set on this 
unit are stored and will be used for subsequent connections. If you want to change the wireless 
access point to connect to, press the [DISP.] button, then change the connecting destination.
5Read through the “LUMIX CLUB” terms of use and press [MENU/SET] • You can press   to switch pages. • Turn the zoom lever clockwise to enlarge the page display (x2 magnification). • If you turn the zoom lever counterclockwise after enlarging the page, the page returns to its original size (no magnification).
 • You can use     to move the position of the area to be enlarged. • Press [  ] button to cancel the process without acquiring a login ID.
6Enter the password • Enter any combination of 8 to 16 characters and numbers for the password. • For details on how to enter characters, refer to “Entering T ext” (→52).
7Check the login ID and press [MENU/SET] • The login ID (12-digit number) will be displayed automatically. When logging in to the “LUMIX CLUB” with a computer , you only 
need to enter the numbers.
 • A message is displayed when the connection is complete. Press  [MENU/SET].
 • Be sure to make a note of the login ID and password.      
						

							260SQW0021
Wi-Fi
Using “LUMIX CLUB”
Using a previously acquired login ID/confirming and changing login ID 
and password ([Set Login ID])
Preparation
To use a previously acquired login ID, confirm your ID and password.
To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” website from 
your smartphone or PC and change the “LUMIX CLUB” password in advance.
1Set the menu
 →  [Setup] → [Wi-Fi] → [Wi-Fi Setup] → [LUMIX CLUB]
2Select [Set/Add Account]
3Select [Set Login ID] • The login ID and password are displayed. • The password is displayed as “”. • Close the menu if only checking the login ID.
4Select the item you wish to change
5Enter your login ID or password • Refer to “Entering Text” (→52) for information on how to enter text. • Enter the new password you have created on your smartphone or PC into the camera. If the 
password differs from the one you created on your smartphone or PC, you will not be able to 
upload images.
6Select [Exit]