Panasonic Digital Camera Dmc Lx100 Owners Manual For Advanced Features

							231SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
 • When connecting with SSID and password Select [Wi-Fi]*
 under [Settings] *
 on the smartphone  Turn on [Wi-Fi] *
 and select the SSID displayed on this unit  Enter the password displayed on this unit (First time connecting only) Return to the home screen and start “Image App”  (→228)
*
 The display may differ depending on the s ystem language setting.
 ■Using an Android device
 • When reading a QR Code to connect Start “Image App” (→228)  Select [QR Code]  Read the QR Code displayed on this unit with “Image  App”
(When you press [MENU/SET] on the camera, the QR code is displayed in an 
enlarged size.)
 • When connecting with SSID and password Start “Image App” (→228)  Select [Wi-Fi]  Select the SSID displayed on this unit Enter the password displayed on this unit (First time connecting only) • If you check the item to display the password, you can confirm the password as you  enter it.      
						

							232SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
Changing the connection method
To change the connection method, press 
the [DISP.] button and select the connection 
method.
 ■When connecting with [Via Network]
(On the camera)
  Select [Via Network] and press [MENU/SET] • Connect the camera to a wireless access point by following the connection method (→264) .(On your smartphone)  Set Wi-Fi function to “ON”  Select the wireless access point you connected to the camera, and set  Start “Image App” (→228)
 ■When connecting with [Direct]
(On the camera)
  Select [Direct] and press [MENU/SET] • Select [Wi-Fi Direct] or [WPS Connection], and connect the camera to the smartphone by 
following the connection method  (→267)
.
(On your smartphone)  Start “Image App” (→228)
Closing the connection
After use, close the connection with the smartphone.
(On the camera)
1Press [Wi-Fi] button
(On the recording standby screen, you can also close the connection by pressing 
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes].)
2Select [Terminate the Connection] • A confirmation screen is displayed. Select [Yes] and press [MENU/SET].
(On your smartphone)
3Close “Image App”
From the “Image App” screen, press the home button on the smartphone to close the app

From the “Image App” screen, press the back button on the smartphone twice to close the app      
						

							233SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
Connecting to a smartphone using NFC function
Using the NFC (Near Field Communication) function, the camera and a smartphone can 
easily exchange the information needed to establish a Wi-Fi connection.
Compatible models:This function can be used with NFC compatible devices with Android (2.3.3 or above). 
(Not available in certain models)
 • See the operating instructions of your NFC-compatible smartphone for more information about smartphone operation and settings.
Preparations
(On the camera)
 • Set [NFC Operation] to [

ON] (→272)
(On your smartphone)
 • Check if your smartphone is a compatible model • Set Wi-Fi function to “ON” • Install “Image App” in advance  (→228)
1Start “Image App” on your smartphone
2While the [  ] is displayed on the connection 
screen of the “Image  App”, hold the smartphone 
close to the camera
Hold the smartphone 
close to this area
(within 5 mm (0.20 inch))
3Use  to select [Yes] and press [MENU/SET]
4Hold the smartphone close to this area of the 
unit again
 • When the connection is complete, live images captured  by the camera will be displayed on your smartphone.
 • It may take some time to complete the connection. • Connected smartphones are registered to this unit.  • From the next time and on, you can connect by performing steps 1 and 2.      
						

							234SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
 ●You can register up to 20 smartphones. If the number of registered smartphones exceeds 20, 
registrations will be deleted starting from the smartphone touched first.
 ●If you perform [Reset Wi-Fi Settings], smartphone registration will be deleted. ●If the communication environment is bad, the NFC function may not be usable. ●If there is not a response immediately, shift the position slightly. ●Do not bump your smartphone strongly against this unit. ●See the operating instructions of your NFC-compatible smartphone for more information about 
smartphone operation and settings.
 ●Metal objects between this unit and the smartphone may interfere with communication. Also, any 
stickers, etc., near the NFC area may affect communication performance.
Not available in the following cases:
 ●The NFC function cannot be used in the following cases: • When the camera is turned off (Including [Sleep Mode ])
 • During motion picture recording • While recording still pictures (during self-timer countdown) • When using [T

ime Lapse Shot]
 • When using [Stop Motion 

Animation]
 • When using [Multi Exp.] • During motion picture playback, during slide shows, during panorama picture playback, and during continuous playback of group pictures (including pauses in each case)
 • While sending pictures by Wi-Fi • When connected to computer/printer ●You cannot transfer still pictures in RAW format, AVCHD motion pictures, or MP4 motion pictures 
with [Rec Quality] of [4K].
Taking pictures via a smartphone (remote recording)
1Connect to a smartphone  (→229)
2Select [  ] from “Image App”
3Take pictures • The recorded images are saved in the camera. • When using zoom, the camera could tilt when the lens barrel extends. Make sure to secure the 
camera in place with a tripod or by other means.
 • Some settings are not available.      
						

							235SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
Playing back pictures in the camera on a smartphone
1Connect to a smartphone (→229)
Switch the 
location of the 
pictures to be 
displayed2Select [  ] from “Image App” • The images captured by the camera are displayed on the smartphone. • You can switch a picture to be displayed using the icon at the top left on 
the screen. Select [LUMIX] to display a picture saved in the camera.
 • When the picture is touched, it is played back at a larger size.
Saving pictures in the camera to the smartphone
1Connect to a smartphone  (→229)
2Select [  ] from “Image App”
3Press and hold the picture and drag it to save it on the 
smartphone
 • The picture is saved on the smartphone. • Functions can be 
assigned to the top, bottom, left and right as you wish.
Not available in the following case:
 ●You cannot save still pictures in RAW format, AVCHD motion pictures, or MP4 motion pictures with 
[Rec Quality] of [4K].      
						

							236SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
Easily transferring pictures in the camera
You can establish a Wi-Fi connection using the NFC function and easily transfer over 
Wi-Fi the picture on display simply by holding the smartphone close to the camera. 
Pictures can be transferred as soon as they are recorded, so you can easily transfer them 
to your friends’ and family’s smartphones.*
*
 “Image App” must be installed to use this function.
Preparations
(On the camera)
 • Set [NFC Operation] to [

ON] (→272)
 • Set [T

ouch Sharing] to [ON] (→272)
(On your smartphone)
 • Check if your smartphone is a compatible model • Set Wi-Fi function to “ON” • Install “Image App” in advance  (→228)
1On the camera, play back the picture you wish 
to transfer to a smartphone
Hold the smartphone 
close to this area
(within 5 mm (0.20 inch))
2Start “Image App” on the smartphone you are 
transferring the picture to
3While the [  ] is displayed on the connection 
screen of the “Image  App”, hold the smartphone 
close to the camera
 • It will be transferred to the smartphone. • If you are transferring multiple pictures, repeat steps 1 
and 3. (Multiple pictures cannot be transferred in one 
batch.)
 • It may take several minutes to complete the picture  transfer depending on the environment used.      
						

							237SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
Sending pictures in the camera to social networking services
1Connect to a smartphone (→229)
Switch the 
location of the 
pictures to be 
displayed2Select [  ] from “Image App”
3Press and hold the picture and 
drag it to send it to the social 
networking service, etc.
 • The picture will be sent to the social 
networking service or other WEB 
services.
 • Functions can be assigned to the top, bottom, left and right as you wish.
Adding location information to pictures in the camera from a 
smartphone
You can send the location information acquired from a smartphone to the camera. After 
the information is sent, you can write it on the pictures in the camera.
GPS
  Starts location information recording
  Ends location information recording
  Sends and writes the location 
information
  Start the recording
 • Location information that is different from the information acquired during recording may be written.  Take care regarding the following matters.
 – Set [Home] of [

World Time] of the camera to your home area.
 – Once a smartphone starts recording the location information, do not change the [Home] setting of [W

orld Time] of the camera.
 • The location information cannot be written to pictures recorded without setting [Clock Set].      
						

							238SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
 ■Starts location information recording
  Operate the smartphone  Select [  ]  Select [Geotagging]  Select [  ]
 ■Ends location information recording
  Operate the smartphone  Select [  ]  Select [Geotagging]  Select [  ]
 ■Sends and writes the location information
  Connect to a smartphone (→229)  Operate the smartphone  Select [  ]  Select [Geotagging]  Select [  ]
 • Follow the messages on the screen to perform the operation.  • Location information will not be written to A
VCHD motion pictures.
 • Location information may not be written if there is not enough free space on your card. • You can also use [Location Logging

] in the [Playback] menu to write the sent location 
information to the pictures. 
 ●Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when 
you use this function. Use at your own risk.
 ●On the smartphone, you can set the acquisition interval of location information and check the 
transfer status of location information. Refer to [Help] in the “Image  App” menu for details.
 ●(When using “Image App” for iOS)
If you press the Home or On/Off button of a smartphone while location information recording is in 
progress, recording is stopped.      
						

							239SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
Operating the camera to send pictures to a smartphone
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD
[Send Images While Recording] (→240) ○–––
[Send Images Stored in the Camera] 
(→241) ○
–
○
*–
* Excluding motion pictures recorded with [Rec Quality] of [4K] • Some images may not be played back or sent depending on the device. • See the operating instructions of the destination device for more information about 
picture playback.
 • For more details about picture sending methods.  (→270)
Preparation
Install “Image App” in advance. (→228)      
						

							240SQW0021
Wi-Fi
Operating the camera by connecting it to a smartphone
[Send Images While Recording]
1Set the menu
 → [New Connection] → [Send Images While Recording] → [Smartphone]
2Select [Via Network] or [Direct] and press [MENU/SET]
 ■When connecting with [Via Network](On the camera) Connect the camera to a wireless access point (→264)
(On your smartphone)
 Set Wi-Fi function to “ON” Select the wireless access point you co nnected to the camera, and set Start “Image App” (→228)
 ■When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct](On the camera) Connect the camera to a smartphone (→267)
(On your smartphone)
 Start “Image App” (→228)
 ■When connecting with [Manual Connection] in [Direct]Perform step 2 (→229).
3Select the device you wish to connect to • When the connection is established, the confirmation screen for the transmission setting is  displayed. Check the setting and press [MENU/SET]. T o change the send setting, press the 
[DISP.] button.  (→271)
4Take still pictures • The still pictures are sent automatically after taking them. • To change the setting or disconnect, press [Wi-Fi] button.
Y
ou cannot change the settings while sending still pictures. Wait until sending is complete.
(You can also close the connection by pressing 
 →  [Setup] → [Wi-Fi] → 
[Wi-Fi Function] → [Yes].)