Panasonic Digital Camera Dmc Lx10 Owners Manual For Advanced Features

							271
Connecting with other devices
Viewing on TV screen
 ●Bars may appear at the sides or at the top and bottom of the screen, dep\
ending on the aspect 
ratio setting.
 ●Change the screen mode on your TV if the picture is displayed with the top or bottom cut off. ●Check the [HDMI Mode]. (→203) ●To play back 24p motion pictures, set [HDMI Mode] to [AUTO]. Otherwise, the picture is not output 
at 24 frames per second.
 ●Pictures are not displayed on the camera screen. ●HDMI output will be canceled if a USB connection cable (supplied) is c\
onnected simultaneously. ●Read the operating instructions for the TV.
The recorded pictures can be played back on a TV with an SD Memory Card \
slot
 ●Proper playback (aspect ratio) will be dependent on the TV used for viewing. ●The file format of the motion pictures that can be played back differs depending on the TV model. ●You may not be able to play back panorama pictures. Also you cannot perform automatic scrolling 
playback of panorama pictures.
 ●For cards compatible with playback, refer to the operating instructions \
of the TV. 
SQW0721     
						

							272
Connecting with other devices
Viewing on TV screen
VIERA Link (HDMI) (HDAVI Control™)
What is VIERA Link (HDMI)? ●VIERA Link is a function that automatically links this camera to VIERA Link-
compatible devices by connecting HDMI micro cables for enabling easy ope\
ration 
with the VIERA remote control. (Some operations are not available.)
 ●VIERA Link (HDMI) is an exclusive Panasonic function added to the industry-\
 
standard HDMI control functions known as HDMI CEC (Consumer Electronics\
 
Control). Operation is not guaranteed when connecting with non-Panasoni\
c HDMI 
CEC-compatible devices. Refer to your product manual to verify compatibi\
lity with 
VIERA Link (HDMI).
 ●This camera supports VIERA Link (HDMI) Version 5. This is the Panasonic standard 
that also supports previous Panasonic VIERA Link devices.
Preparation
Set [VIERA Link] to [ON] (→203).
1Connect the camera to a VIERA Link (HDMI)-compatible Panasonic television 
(VIERA) with an HDMI micro cable (→270)
2Turn on the camera and press [  ] (Playback) button
3Operate with the remote control for the TV
Turning the unit OFF
 • The camera can also be turned of

f when the television is turned off with the remote 
control.
Automatic input select
 • When the camera and 

TV are connected by HDMI micro cable, the camera is 
turned ON, and the camera’s [
 
 ] (Playback) button is pressed, the television input 
automatically switches to the camera’ s screen. The television can also be switched on 
via the camera from Standby Mode (if “Power on link” on the telev\
ision is set to “on”).
 ●Operations via the camera buttons will be limited. ●To play back the audio of the motion pictures in a slide show, set the [Sound] in the Slide Show 
setting screen to [AUTO] or [Audio].
 ●Use a “High Speed HDMI micro cable” with the HDMI logo. Cables tha\
t do not comply with the 
HDMI standards will not work.
“High Speed HDMI micro cable” (Type
  D-Type  
A
  plug, up to 2 m (6.6 feet) long)
 ●If VIERA Link (HDMI) does not function correctly  (→298) 
SQW0721     
						

							273
Connecting with other devices
Storing recorded still pictures and motion pictures 
on your PC
Still/motion pictures can be copied from the camera to your computer by \
connecting the 
two together.
 • Some computers can read directly from the camera’
s memory card.
For details, see the instruction manual for your computer.
 ■Computer specifications
You can connect the camera to a computer that can detect a mass storage d\
evice (device 
that stores a large volume of data).
 • Windows: Windows 10 / Windows 8.1 / Windows 8 / Windows 7 • Mac: OS X v10.5 - v10.1

1
Some motion pictures recorded in [AVCHD] may not be scanned correctly by 
copying a file or folder
 ●When using Windows, be sure to use the “PHOTOfunSTUDIO” software (→274) to copy motion 
pictures recorded in [AVCHD].
 ●When using Mac, you can copy motion pictures recorded in [AVCHD] using “iMovie”. Note, however, 
that it may not be possible to copy pictures depending on the picture qu\
ality settings. 
(For details about iMovie, please contact Apple Inc.) 
SQW0721     
						

							274
Connecting with other devices
Storing recorded still pictures and motion pictures on your PC
Downloading software
If you wish to play back or edit pictures on a PC, download software fro\
m the supplier’s 
website and install it on your PC.
PHOTOfunSTUDIO 9.9 PE
You can capture still pictures or motion pictures to your PC, or organize\
 captured pictures 
by categorizing by recording date, model name of the digital camera used\
 to record, etc. 
You can also correct still pictures, edit motion pictures, or write to DV\
D.
Check the website below to download/install the software.
The software is available for download until the end of October 2021.
http://panasonic.jp/support/global/cs/soft/download/d_pfs99pe.html
 •Operating environment
Supported OS Windows
® 10 (32-bit/64-bit)
Windows® 8.1 (32-bit/64-bit)
Windows® 8 (32-bit/64-bit)
Windows® 7 (32-bit/64-bit) SP1
CPU Windows® 10
Pentium
® 4    2.8 GHz or higher
Windows® 8.1
Windows® 8
Windows® 7
Display 1024×768 pixels or more (1920×1080 pixels or more recommended)
RAM Windows
® 10
1 GB or more (32-bit) / 2 GB or more (64-bit)
Windows® 8.1
Windows® 8
Windows® 7
Free hard disk 
space 450 MB or more for installing software
 • To edit 4K motion pictures, you need the 64-bit versions of Windows 10, 
Windows   8.1, Windows 8, or Windows 7.
 • “PHOT

OfunSTUDIO” is not compatible with Mac.
 • Refer to the operating instructions of “PHOT

OfunSTUDIO” (PDF) for further 
information about the operating environment. 
SQW0721     
						

							275
Connecting with other devices
Storing recorded still pictures and motion pictures on your PC
SILKYPIX Developer Studio SE
This software develops and edits RAW file pictures. Edited pictures can be saved in a file 
format such as JPEG or TIFF that can be displayed on a PC, etc.
Check the website below to download/install the software.
http://www.isl.co.jp/SILKYPIX/english/p/
 •Operating environment
Supported OS Windows
® 10
Windows® 8.1
Windows® 8
Windows® 7
Mac® OS X v10.6 - v10.11
 • For details on the operating environment and how to use the SILKYPIX Dev\
eloper  Studio SE, refer to the “Help” or the Ichikawa Soft Laboratory’\
 s support website.
LoiLoScope 30 day full trial version
(Windows 10 / 8.1 / 8 / 7)
Motion pictures can be edited easily.
Check the website below to download/install the software.
http://loilo.tv/product/20
 • For more information on how to use LoiLoScope and its operating environm\
ent, read  the LoiLoScope manual available for download at the website.
 • “LoiLoScope” is not compatible with Mac.
 ●To download the software, the PC must be connected to the Internet. ●It may take time to download the software in some communication environm\
ents. 
SQW0721     
						

							276
Connecting with other devices
Storing recorded still pictures and motion pictures on your PC
Copying still pictures and motion pictures
Preparations • Install “PHOTOfunSTUDIO” on your computer before starting the copying procedure.  (→274)
 • T

urn on the camera and computer.
1Connect camera to computer • Check the plug direction and insert it straight in. (If the cable is in\
serted in the wrong direction, the plug could become deformed and cause faulty operation.)  Also, do not insert into the wrong 
socket. Doing so may cause damage to this unit.
 • Do not use any other USB connection cables except the supplied one.
[Access] • Do not disconnect the USB connection cable (supplied) while [Access ] is displayed.
[USB/CHARGE] socketUSB connection cable (supplied)
2Use  to select [PC] and press [MENU/SET] • If you set the [USB Mode] (→202) to [PC] in the [Setup] menu in advance, the camera will be 
automatically connected to the PC without displaying the [USB Mode] selection screen.
3Use “PHOTOfunSTUDIO” to copy pictures to your computer • Do not delete or move copied files and folders using Windows Explorer or\
 other browsers.  Otherwise, you will not be able to play back or edit the files using “\
PHOT OfunSTUDIO”. 
SQW0721     
						

							277
Connecting with other devices
Storing recorded still pictures and motion pictures on your PC
 ■Copying to your computer without using “PHOTOfunSTUDIO”
You can save pictures to use on your computer by dragging and dropping fo\
lders and 
files into separate folders on your computer.
 • The card of this unit contains the following files (folder structure).\
*2
 ●WindowsDrive (“LUMIX”) is 
displayed in “Computer”.
 ●MacDrive (“LUMIX”) is 
displayed on the desktop. DCIM (Still/motion pictures)
100_PANA (Up to 999 pictures/folder)
Folder number
P1000001.JPG*1
File number
P1000999.JPG
101_PANA
999_PANA
MISC (DPOF files, Favorite)
PRIVATE
AVCHD (Motion pictures in AVCHD) Color  Space
      P:  
sRGB
  
_:   AdobeRGB
Card
*1   .JPG: Still pictures 
.RW2: Still pictures recorded in RAW file 
.MP4: [MP4] Motion Pictures
*2   New folders are created in the following cases: • When there is a picture with file number 999 inside the folder .
 • When using cards already containing the same folder number (for example\
, pictures taken with other cameras, etc.).
 • When recording after performing [No.Reset

]. (→205)
 ●Before inserting or removing a card, turn the camera off and disconnect the USB connection 
cable. Otherwise, data may be destroyed.
 ●Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional). ●When the battery begins to run out during communication, a warning beep \
sounds. Remove the 
USB connection cable safely. Otherwise, data may be destroyed. 
SQW0721     
						

							278
Connecting with other devices
Storing recorded still pictures and motion pictures in 
the recorder
If you insert a card that has pictures recorded with this camera into 
a Panasonic recorder, you can dub the content to a Blu-ray Disc or 
DVD etc.
 • The method of importing still pictures and motion pictures recorded in this unit to other devices will vary depending on the file format 
(JPEG, RA

W, AVCHD, or MP4).
 • See the instruction manual for the recorder for details for copying and \
playing back. 
SQW0721     
						

							279
Connecting with other devices
Printing
You can connect directly to a PictBridge-compatible printer for printing.\
Preparations • Adjust the print quality or other settings on your printer, as needed.
 • T

urn on the camera and printer.
1Connect camera to printer • Check the plug direction and insert it straight in. (If the cable is in\
serted in the wrong direction, the plug could become deformed and cause faulty operation.)  Also, do not insert into the wrong 
socket. Doing so may cause damage to this unit.
 • Do not use any other USB connection cables except the supplied one. Usin\
g cables other than  the above may cause a malfunction.
[  ] • Do not disconnect the USB connection cable (supplied) when the cable d\
isconnection icon [
 
 ] is displayed (may not be displayed w ith some printers).[USB/CHARGE] socketUSB connection cable (supplied)
2Use   to select [PictBridge(PTP)] and press [MENU/SET]
3Use   to select a picture and press [MENU/SET]
4Use  to select [Print start] and press [MENU/SET](Print settings (→281)) 
SQW0721     
						

							280
Connecting with other devices
Printing
Printing multiple pictures
Multiple pictures are printed at one time.
1Press  to select [Multi Print] in step 3 of “Printing” (→279)
2Use   to select the item and press [MENU/SET]
[Multi Select]Scroll between pictures with    , select pictures to print with 
[MENU/SET] (Press [MENU/SET] again to release selection.)
Use  to select [OK], and press [MENU/SET]
[Select All] Print all pictures.
[Print Set (DPOF)] Print pictures selected in [Print Set].  (→224)
[Favorite] Print pictures selected as [Favorite]. (→223)
3Use  to select [Print start] and press [MENU/SET](Print settings (→281))
 ●The group pictures are displayed one by one instead of all pictures at t\
he same time. ●Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional). 
When the battery begins to run out during communication, a warning beep \
sounds. Cancel printing 
and disconnect USB connection cable (supplied).
 ●Before inserting or removing a card, turn the camera off and disconnect the USB connection 
cable.
 ●Some printers can print directly from the camera’s memory card. For details, see the manual for 
your printer.
 ●An orange “●” displayed during printing indicates an error message. ●Print may be divided into several pictures if printing a large amount of\
 pictures. (Remaining sheets 
display may differ from the number of pictures set for printing.)
 ●Motion pictures, 4K burst files, and pictures recorded with [Post Focus] cannot be printed. ●Still pictures recorded in a RAW file cannot be printed. (The still pictures recorded in JPEG file 
format at the same time as the RAW file can be printed.) 
SQW0721