Panasonic Digital Camera Dmc Lx10 Owners Manual For Advanced Features

							2 11
Using Menu Functions
Menu list
[Location Logging]
After you send location information (latitude and longitude) obtained \
by your smartphone/
tablet to this unit, you can write this information on pictures using th\
e unit.
Preparation
Send location information to this unit from your smartphone/tablet. (→238)
 • Y

ou must install “Panasonic Image App” on your smartphone/tablet.  (→231)
 →  [Playback] → [Location Logging]
1Use  to select [Add Location Data] and press [MENU/SET]
2Use   to select a period for writing location information, and press  
[MENU/SET]
 • [   ] is displayed for  pictures that have location information written to it.
 ■Abort writing location information
Press [MENU/SET] while location information is being written • [  ] is displayed for the period of the abort operation.  
If selected again while [   ] is displayed, writing location information will resume whe re it left off.
 ■Delete received location information
Use  to select [Delete Location Data] and press [MENU/SET]Use   to select a period for deleting location information, and press [MENU/SET]
 ●The location information cannot be written in the following cases: • Pictures that were recorded after you sent the location information  (→
238)
 • Pictures that already have location information • Motion pictures recorded in [A

VCHD] format
When you use your smartphone/tablet as a remote controller for this unit\
, you can write the 
location information on pictures using the smartphone/tablet.  (→239) 
SQW0721     
						

							212
Using Menu Functions
Menu list
[RAW Processing]
You can use the camera to develop still pictures that were recorded in RA\
W format. The 
created still pictures are saved in JPEG format.
 →  [Playback] → [RAW Processing]
1Press   to select RAW file and press [MENU/SET]
2Press   to select the item • The following items can be set. The settings used during 
recording are applied at the time of setting.
[White Balance] You can select White Balance to make adjustments. When you select an 
item with [
  ], you can develop the pictures using the same settings that 
were applied for recording.
[Exposure Comp.] You can perform Exposure Compensation in the range from –1 EV to 
+1
 
EV.
[Photo Style] You can select the [Photo Style] effects ([Standard], [Vivid], [Natural], 
[Monochrome], [Scenery], or [Portrait]).
[i.Dynamic] You can select the [i.Dynamic] settings ([HIGH], [STANDARD], [LOW], or 
[OFF]).
[Contrast] You can adjust the contrast.
[Highlight] You can adjust the brightness of a highlighted area.
[Shadow] You can adjust the brightness of a shadowed area.
[Saturation] / 
[Color Tone] You can adjust the saturation. (You can adjust the coloring when 
[Monochrome] is selected for [Photo Style].)
[Filter Effect] You can select a Filter effect. (Only when [Monochrome] is selected for 
[Photo Style].)
[Noise Reduction] You can set noise reduction.
[i.Resolution] You can select the [i.Resolution] settings ([HIGH], [STANDARD], [LOW], 
[EXTENDED], or [OFF]).
[Sharpness] You can adjust the impression of resolution.
[Setup] You can perform the following settings.
[Reinstate Adjustments]:
   
Y
 ou can restore the settings to the ones used 
during recording.
[Color Space]:
  
Y
 ou can select [Color Space] from either [sRGB] or 
[AdobeRGB].
[Picture Size]:
  
Y
 ou can select the picture size ([L], [M], or [S]) of a JPEG 
file when saving pictures.
3Press [MENU/SET] to set • The setting methods vary depending on the item. For details, refer to “\
Setting each item”  (→ 213). 
SQW0721     
						

							213
Using Menu Functions
Menu list
4Press [MENU/SET] • The screen in step 2 reappears. To set another item, repeat steps 2 to 4.
5Press   to select [Begin Processing] and press [MENU/SET]
 ■Setting each item
When you select an item, the setting screen appears.
Operation Touch 
operation Description
 Drag
Used to make adjustments
[WB K Set] Used to display the color 
temperature setting screen 
(→106)
(Only when [White Balance] is set 
to [
 
 ])
[Adjust.]Used to display the White Balance 
fine adjustment screen 
(→108)
(Only when [White Balance] is set)
[DISP.] [DISP.] Used to display the comparison 
screen
[MENU/SET] [Set] Used to finalize an adjustment you 
just made and to return to the item 
selection screen
SetSet
SetSetAdjust.Adjust.
 • If you have selected [
Noise Reduction], [i.Resolution], or [Sharpness], the comparison 
screen is not displayed.
 • Pictures can be enlarged by operating the zoom lever

.
 • Y

ou can also zoom in by quickly touching the touch screen twice. (If the\
 display was 
enlarged, it returns to the same magnification ratio.) 
SQW0721                  
						

							214
Using Menu Functions
Menu list
The following operating methods are available to make adjustments on the\
 comparison 
screen.
Current setting
OperationTouch 
operation Description
 Drag
Used to make adjustments
[DISP.] [DISP.] Used to return to the setting screen
[MENU/SET] [Set] Used to finalize an adjustment you 
just made and to return to the item 
selection screenSetSet
 • If you touch the picture at the center
, it will be enlarged. If you touch [   ], the picture 
will be reduced to the original size.
When [Setup
] is selected
When you select an item, the screen for selecting [ Reinstate Adjustments], [Color Space], 
or [Picture Size] is displayed.
Use   to select the item and press [MENU/SET] • When [ Reinstate Adjustments] is selected, confirmation screen is displayed. When you select 
[Ye s ], the item selection screen reappears.
Use   to select the setting and press [MENU/SET]
 ●The result of a RAW file developed by this camera and a RAW file developed by the software 
“SILKYPIX Developer Studio SE”  (→275) will not be exactly the same.
 ●Regardless of the aspect ratio of the picture during recording, a RAW image recorded on this 
camera is always recorded with the aspect ratio set to [3:2] (5472×3648), but if you perform [RAW 
Processing] from the [Playback] menu, the picture will be processed with the aspect ratio fixed as 
that at the time of recording.
 ●The [White Balance] setting of still pictures recorded using [Multi Exp.] is fixed to the setting used 
during recording.
 ●When an HDMI micro cable is connected, [RAW Processing] is disabled. ●You can perform RAW processing on pictures recorded using this unit only. 
SQW0721         
						

							215
Using Menu Functions
Menu list
[4K PHOTO Bulk Saving]
You can bulk save 5 seconds’ worth of 4K recording from a 4K burst file.
 →  [Playback] → [4K PHOTO Bulk Saving]
1Use   to select the 4K burst files and press [MENU/SET] • If the burst time is 5 seconds or less, all the frames can be saved as a\
 picture.
2Select the first frame to be bulk saved as a picture • The selection method is the same as the operation to choose the frame yo\
u want to save as a picture from a 4K burst file. For details  (→11 7).
 • The picture will be saved in JPEG format as a single burst picture group\
  (→

166).
[Light Composition]
Select multiple frames from 4K burst files that you wish to combine. Par\
ts of the image 
that are brighter than the preceding frame will be superimposed on the p\
receding frame 
to combine the frames into one picture.
 →  [Playback] → [Light Composition]
1Use   to select the 4K burst files and press [MENU/SET]
2Choose the combining method and press [MENU/SET]
 ■When [Composite Merging] is selectedSelect the frames you wish to combine, and then camera superimposes brig\
hter parts of the 
image.
Select the framesFor button and touch operation, refer to (→11 9). • Images displayed cannot be enlarged or shrunk or shown as 
in slide view
 • [

 
 ] in touch operation becomes [   ]. 
SQW0721                 
						

							216
Using Menu Functions
Menu list
Press [MENU/SET]The selected frames are remembered, and the display goes to the preview \
screen.
Use   to select items and press [MENU/SET] to perform the following operation\
s. – [
Next]:
  Lets you select more frames for combining. Goes back to step . – [
Reselect]:
   Discards the frame selected im
mediately before and lets you select a different 
image.
 – [

Save]: Ends frame selection.
Repeat steps  -  to select more frames to combine • You can select up to 40 frames.Press  to select [Save], and then press [MENU/SET]
 ■When [Range Merging] is selectedSelect the first and last frames, and the brighter parts of frames withi\
n that range will be 
superimposed.
Select the frame of the first picture and then press [MENU/SET]The selection method is the same as in step  when selecting [Composite Merging].Select the frame of the last picture and then press [MENU/SET]
3Select [Ye s ] at the confirmation screen and press [MENU/SET]The combined picture is displayed. • Pictures are saved in JPEG format. Recording information (Exif informat\
ion) of the first frame 
such as shutter speed, aperture, and ISO sensitivity are also registered\
. 
SQW0721     
						

							217
Using Menu Functions
Menu list
[Clear Retouch]
 • The erasure operation can only be performed by touching. [Clear Retouch] 
automatically enables the touch 
operation.
 →  [Playback] → [Clear Retouch]
1Use   to select a still picture and press [MENU/SET]
SetSetUndoUndo
SCALINGSCALING
REMOVE REMOVE
2Drag your finger over the part you want to erase • The parts to be erased are colored. • T
ouching [Undo] will return the colored part back to its previous 
state.
Erasing details (enlarging the display)
SetSet
UndoUndo
SCALING
SCALING
REMOVE
REMOVETouch [SCALING] • On the touch screen, pinch out your two fingers to zoom in, and 
pinch in your two fingers to zoom out  (→
39).
 • Y

ou can also zoom in/out with the zoom lever.
 • Dragging the screen allows you to move the enlarged part.Touch [REMOVE] • This will bring you back to the operation of dragging your finger over the part you want to erase. 
The part you want to erase can 
be dragged even while the picture is enlarged.
3Touch [Set]
4Touch [Save] or press [MENU/SET]
 ●Pictures may appear unnatural because the background of deleted parts is\
 artificially created. ●For group pictures, perform [Clear Retouch] on each picture. (They cannot be edited at once.) ●When [Clear Retouch] is performed on group pictures, they are saved as new pictures separat\
e 
from the original ones.
 ●This function is not available in the following cases: • Panorama pictures • Motion pictures • 4K burst files • Pictures recorded using [Post Focus

]
 • Still pictures recorded with the [Quality

] setting [  
 ] 
SQW0721                  
						

							218
Using Menu Functions
Menu list
[Title Edit]
You can enter characters (titles etc.) on a recorded picture. After text has been registered, 
it can be stamped in prints using [Text Stamp] (→219).
 →  [Playback] → [Title Edit]
1Select a still picture (→207) • [  ] is displayed for  pictures with texts already stamped.
2Enter characters • For details on how to enter characters, refer to “Entering  Text” (→49) • T
o delete texts, delete all the characters in the character input screen.\
 ●You can print out texts using the “PHOTOfunSTUDIO” software (→274). ●You can set up to 100 pictures at one time with [Multi]. ●This function is not available in the following cases: • Motion pictures • 4K burst files • Pictures recorded using [Post Focus

]
 • Still pictures recorded with the [Quality

] setting [  
 ],  [  ] or [  ] 
SQW0721     
						

							219
Using Menu Functions
Menu list
[Text Stamp]
You can stamp the recording date and time, names, travel destination, tra\
vel dates, etc. 
on the recorded still pictures.
 →  [Playback] → [Text Stamp]
1Select a still picture (→207) • [  ] appears on screen if the picture is stamped with text.
2Use  to select [Set] and press [MENU/SET]
[Shooting Date] [W/O TIME]: Stamp recording date
[WITH TIME]: Stamp recording date and time
[Name]
 : Stamp name registered in Face Recognition : Stamp name registered in [Profile Setup]
[Location] Stamp location registered in [Setup] menu’s [Travel Date]
[Travel Date] Stamp number of days that have elapsed since the travel date set in [Setup] 
menu’s [Travel Date]
[Title] Stamp text registered in [Title Edit]
3Press [Q.MENU/] button
4Use  to select [OK] and press [MENU/SET]
 ●Do not request date printing in store or make date printing on printer f\
or still pictures with 
date stamps. (Date printing may be overlapped.)
 ●You can set up to 100 pictures at one time with [Multi]. ●The picture quality may be coarser. ●If you stamp text on the pictures in a group, those pictures are saved a\
s new pictures. ●This function is not available in the following cases: • Motion pictures • 4K burst files • Pictures recorded using [Post Focus

]
 • Still pictures recorded with the [Quality

] setting [  
 ] • Panorama pictures • Still pictures that other texts had already been stamped • Still pictures taken without setting clock 
SQW0721     
						

							220
Using Menu Functions
Menu list
[Video Divide]
A single motion picture can be split into 2 parts. This is convenient when you want to keep 
just the necessary scenes, or if you wish to delete unnecessary scenes t\
o increase free 
space on your card, such as when traveling.
 →  [Playback] → [Video Divide]
1Use   to select a motion picture to split and press [MENU/SET]
2Press  at where you want to split a motion picture to 
pause it
 • If you press   while paused, you can make finer adjustments 
to the splitting positions in a motion picture.
3Press  • The original motion picture that was split does not remain.   
(There will only be the 2 motion pictures that were created after 
the split.)
 ●During dividing, do not turn off the camera or remove the card or battery. If you do so, the motion 
picture may be deleted.
 ●Motion pictures cannot be divided at a location close to the start or en\
d of the motion picture. ●This function is not available in the following case: • Motion pictures with a short recording time
[Time Lapse Video]
You can create a motion picture from the pictures in a group that was rec\
orded using 
[Time Lapse Shot]. The motion picture you created is saved in the MP4 recording format.
 →  [Playback] → [Time Lapse Video]
1Use   to select the [Time Lapse Shot] picture group and press  
[MENU/SET]
2Create a motion picture after selecting a production method • For details, refer to step 4 and the subsequent steps  (→134).  
For details on the motion picture you created, refer to  (→134). 
SQW0721